Messages

1

Kloxo-MR Technical Helps / Re: Changing a server IP address?

« on: 2014-11-02, 07:53:57 »

I have fixed this, I deleted the IP addresses in the "IP address" list, rebooted the server, refreshed the list to get new IP's and made a new DNS template.

Thanks!

2

Kloxo-MR Technical Helps / Changing a server IP address?

« on: 2014-11-02, 07:53:06 »

Hi, I've moved my OpenVZ server to a different IP address, however the OLD IP's are still showing in the IP configuration section of Kloxo. I've rebooted many times!

I've tried running the /script/fix scripts with no luck, and when trying to add a new DNS template it still shows me the old IP's.

Output of ifconfig:

Code: [Select]

[root@k1 ~]# ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:100 errors:0 dropped:0 overruns:0 frame:0
          TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9156 (8.9 KiB)  TX bytes:9156 (8.9 KiB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:1816 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2432 errors:0 dropped:11 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:204646 (199.8 KiB)  TX bytes:2166258 (2.0 MiB)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:194.68.223.240  P-t-P:194.68.223.240  Bcast:194.68.223.240  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:1  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:194.68.223.241  P-t-P:194.68.223.241  Bcast:194.68.223.241  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
Kloxo IP configuration:

3

Kloxo-MR Bugs and Requests / Re: Bug - "Alert: Need select php-type. Click [here] to set it." whatever is set...

« on: 2014-06-16, 10:09:20 »

Go to 'admin > servers > localhost > webserver configure'

That's what I've always been doing. It worked a few months back when i first setup kloxomr server, but now i reinstalled the OS and this happens!

EDIT: I'm also getting TONS of nginx restart errors in email.....

4

Kloxo-MR Bugs and Requests / Re: Bug - "Alert: Need select php-type. Click [here] to set it." whatever is set...

« on: 2014-06-16, 09:14:46 »

I've updated PHP Configure, then gone back to webserver config and updated all of them but still no luck...

Should the only drop down option for "PHP Used" be "Use PHP Branch"? I've just setup another kloxomr server to test and it's got the same issue as this, even when running all the /script/fix* commands...

EDIT: phptype in the sysinfo script is still blank, same with another new install also...

Code: [Select]

A. Kloxo-MR: 6.5.1.b-2014061502

B. OS: CentOS release 6.5 (Final) i686

C. Apps:
   1. MySQL: mysql55-5.5.37-1.ius.el6.i686
   2. PHP: php52-5.2.17-102.mr.el6.i386
   3. Httpd: httpd-2.2.27-1.mr.e6.i386
   4. Lighttpd: --uninstalled--
   5. Hiawatha: hiawatha-9.6-1.mr.el6.i386
   6. Nginx: nginx-1.7.1-1.el6.ngx.i386
   7. Cache: --uninstalled--
   8. Dns: bind-9.8.2-0.23.rc1.el6_5.1.i686
   9. Qmail: qmail-toaster-1.03-1.3.38.mr.el6.i386
      - with: courier-imap-toaster-4.1.2-1.3.16.mr.el6.i386

D. Php-type (for Httpd/proxy):

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           498        464         34          0         65        203
   -/+ buffers/cache:        196        302
   Swap:         1023          0       1023

5

Kloxo-MR Bugs and Requests / Re: Bug - "Alert: Need select php-type. Click [here] to set it." whatever is set...

« on: 2014-06-15, 21:14:29 »

Switching to nginx has allowed me to save the settings, but it still comes up with the error message

6

Kloxo-MR Bugs and Requests / Bug - "Alert: Need select php-type. Click [here] to set it." whatever is set...

« on: 2014-06-15, 20:59:44 »

I'm getting this error even when playing with different types of PHP. It also doesn't seem to be saving the settings...

I just need it to use PHP 5.2 and PHP type ruid2, the old kloxo never had this issue!

I set each of these to the following and click update for all of them:



However when i refresh the page it goes back to:

7

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 10:59:53 »

Run 'yum install php53u-mysqli'.

It's saying it's already installed, even with yum reinstall! Is there any way to make the backup script run manually so I can just reinstall Kloxo-mr?

8

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 10:49:23 »

inform here 'lxphp.exe -v; lxphp.exe -m; yum list installed php*'.

Code: [Select]

PHP 5.3.28 (cli) (built: Mar  5 2014 17:36:57)
Copyright (c) 1997-2013 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2013 Zend Technologies
[PHP Modules]
bz2
calendar
Core
ctype
date
ereg
exif
filter
ftp
gettext
gmp
hash
iconv
libxml
openssl
pcntl
pcre
readline
Reflection
session
shmop
SimpleXML
sockets
SPL
sqlite3
standard
tokenizer
xml
zlib

[Zend Modules]

Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
 * base: mirror.symnds.com
 * extras: mirror.kentdigital.net
 * mratwork-epel: mirror.symnds.com
 * mratwork-ius: mirror.symnds.com
 * updates: mirror.lug.udel.edu
0 packages excluded due to repository protections
Installed Packages
php53u.i686                                                                                                       5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-cli.i686                                                                                                   5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-common.i686                                                                                                5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-embedded.i686                                                                                              5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-imap.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-intl.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-ldap.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-litespeed.i686                                                                                             5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-mbstring.i686                                                                                              5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-mcrypt.i686                                                                                                5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-mysql.i686                                                                                                 5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-pdo.i686                                                                                                   5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-pear.noarch                                                                                                1:1.9.4-3.ius.el6                                                                                             @mratwork-ius
php53u-pecl-geoip.i686                                                                                            1.0.8-1.ius.el6                                                                                               @mratwork-ius
php53u-process.i686                                                                                               5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-pspell.i686                                                                                                5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-recode.i686                                                                                                5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-snmp.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-soap.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-tidy.i686                                                                                                  5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-xml.i686                                                                                                   5.3.28-2.ius.el6                                                                                              @mratwork-ius
php53u-xmlrpc.i686                                                                                                5.3.28-2.ius.el6                                                                                              @mratwork-ius

9

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 10:29:42 »

Nothing wrong with repo but I found something wrong with yum in Centos 6.

"echo "http_caching=packages" >> /etc/yum.conf" then your above instructions fixed that error and kloxo-phpcgi starts fine now, but it's saying "Fatal error: Class 'mysqli' not found in /usr/local/lxlabs/kloxo/httpdocs/lib/php/sqlitelib.php on line 59". Grr!

10

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 09:40:29 »

If using 6.5.1.b, run 'yum replace mratwork-release --replace-with=mratwork-testing' and then 'cd /; yum clean all; yum update' before running 'sh /script/cleanup'.

Thanks, although with this I'm getting the following errors below. This is an i686 server, should I try to make backups and reinstall the server with 64bit?

Code: [Select]

https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/centos6/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
mratwork-testing-version-arch/primary                                                                                                                                         | 4.0 kB     00:00
https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/centos6/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
Error: failure: repodata/primary.xml.gz from mratwork-testing-version-arch: [Errno 256] No more mirrors to try.

11

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 08:42:52 »

Need running 'sh /script/cleanup' to re-create 'new' login page.

It's turned into "Kloxo-MR: error 503 found!" on the login page now! Kloxo-cgi process also seems to fail to start.



Here is my /etc/yum.repos.d/mratwork.repo file as I'm not sure what it should be anymore!

Code: [Select]

[mratwork-release-neutral-noarch]
name=MRatWork - release-neutral-noarch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-release-neutral-noarch-mirrors.txt
enabled=1
gpgcheck=0

[mratwork-release-neutral-arch]
name=MRatWork - release-neutral-arch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/$basearch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-release-neutral-$basearch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-release-version-noarch]
name=MRatWork - release-version-noarch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/release/centos$releasever/noarch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-release-centos$releasever-noarch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-release-version-arch]
name=MRatWork - release-version-arch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/release/centos$releasever/$basearch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-release-centos$releasever-$basearch-mirrors.txt
enabled=1
gpgcheck=0

[mratwork-testing-neutral-noarch]
name=MRatWork - testing-neutral-noarch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/neutral/noarch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-testing-neutral-noarch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-testing-neutral-arch]
name=MRatWork - testing-neutral-arch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/neutral/$basearch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-testing-neutral-$basearch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-testing-version-noarch]
name=MRatWork - testing-version-noarch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/centos$releasever/noarch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-testing-centos$releasever-noarch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-testing-version-arch]
name=MRatWork - testing-version-arch
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/testing/centos$releasever/$basearch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-testing-centos$releasever-$basearch-mirrors.txt
enabled=0
gpgcheck=0

[mratwork-srpms]
name=MRatWork - srpms
baseurl=https://github.com/mustafaramadhan/kloxo/raw/rpms/SRPMS/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/mratwork-SRPMS-mirrors.txt
enabled=0
gpgcheck=0

# ==================================

[mratwork-centalt]
name=MRatWork - centalt - arch
baseurl=http://centos.alt.ru/repository/centos/$releasever/$basearch/
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/centalt-centos-$releasever-$basearch-mirrors.txt
enabled=1
gpgcheck=0
exclude=openssh* perl* mariadb* php* postfix* exim* ssmtp*

# ==================================

[mratwork-ius]
name=MRatWork - IUS Community Packages for EL $releasever - arch
baseurl=http://dl.iuscommunity.org/pub/ius/stable/Redhat/$releasever/$basearch
mirrorlist=http://dmirr.iuscommunity.org/mirrorlist/?repo=ius-el$releasever&arch=$basearch
enabled=1
gpgcheck=0
exclude=php52* mysql51*

# ==================================

[mratwork-epel]
name=MRatWork - Extra Packages for EL $releasever - arch
baseurl=http://download.fedoraproject.org/pub/epel/$releasever/$basearch
mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-$releasever&arch=$basearch
enabled=1
gpgcheck=0
exclude=postfix* exim* ssmtp*

# ==================================

# for varnish
[mratwork-varnish-3.0]
name=MRatWork - Varnish 3.0 for EL $releasever - arch
baseurl=http://repo.varnish-cache.org/redhat/varnish-3.0/el$releasever/$basearch
enabled=1
gpgcheck=0

# ==================================

# for hiawatha
[mratwork-centosec]
name=MRatWork - CentOS $releasever Packages from CentOS.EC
baseurl=http://centos$releasever.ecualinux.com/$basearch
enabled=0
gpgcheck=0
exclude=cairo*

# ==================================

# for nginx-stable
[mratwork-nginx]
name=Kloxo-MR - nginx repo
baseurl=http://nginx.org/packages/centos/$releasever/$basearch/
gpgcheck=0
enabled=0

# ==================================

# for mariadb
[mratwork-mariadb]
name=Kloxo-MR - mariadb repo
baseurl=http://yum.mariadb.org/5.5/centos$releasever-x86
enabled=0
gpgcheck=0

# ==================================

# for atrpms
[mratwork-atrpms]
name=Kloxo-MR - Fedora Core $releasever -  - ATrpms
baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable
gpgcheck=0
enabled=0

# ==================================

# for litespeed
[mratwork-litespeed]
name=MRatWork - LiteSpeed Tech Repository for CentOS $releasever - $basearch
baseurl=http://rpms.litespeedtech.com/centos/$releasever/$basearch/
#failovermethod=priority
enabled=1
gpgcheck=0

[mratwork-litespeed-update]
name=MRatWork - LiteSpeed Tech Repository for CentOS $releasever - $basearch
baseurl=http://rpms.litespeedtech.com/centos/$releasever/update/$basearch/
#failovermethod=priority
enabled=1
gpgcheck=0

# ==================================

# for mod-pagespeed
[mratwork-google-mod-pagespeed]
name=MRatWork - google-mod-pagespeed
baseurl=http://dl.google.com/linux/mod-pagespeed/rpm/stable/$basearch
enabled=1
gpgcheck=0


12

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-11, 00:08:14 »

Error '/usr/bin/lxphp.exe: line 10: /opt/php53s/usr/bin/php: No such file or directory' mean no exist php53s. So, need install 'new' php53s (different approach compare to 'old' php53s).

I've tried /script/fixlxphpexe and nothing...

Did you follow his advice and run this below? sh /script/php53s-installer is needed for Kloxomr 6.5.1 and after I ran it with a reboot I had access to kloxo-mr.

yum clean all
## will be include Kloxo-MR 6.5.1.b-2014040405
yum update
## need convert to 'new' php53s
sh /script/php53s-installer
## must run cleanup where cleanup-simple may not work
sh /script/cleanup

The script gets stuck at "-- Check installed dependencies rpms", I've left it overnight and nothing...

13

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-10, 21:10:22 »

Error '/usr/bin/lxphp.exe: line 10: /opt/php53s/usr/bin/php: No such file or directory' mean no exist php53s. So, need install 'new' php53s (different approach compare to 'old' php53s).

I've tried /script/fixlxphpexe and nothing...

14

Kloxo-MR Technical Helps / Re: Can't Login to Control Panel After Last Update

« on: 2014-04-09, 23:47:21 »

All the options posted don't work, and new installs are also broken. Tons of missing lxphp errors everywhere and the login page displays the same error as the OP...

/usr/bin/lxphp.exe: line 10: /opt/php53s/usr/bin/php: No such file or directory

15

Kloxo-MR Technical Helps / Re: php-fpm problem

« on: 2014-03-27, 16:48:17 »

Also getting this problem, I think it's a bug in this software (as always)