Messages

1

Kloxo-MR Technical Helps / Re: The future of Kloxo-MR

« on: 2017-10-20, 02:33:30 »

Thanks John,

I agree essentially with all you are proposing, hope we can talk soon.

2

Kloxo-MR Technical Helps / Re: The future of Kloxo-MR

« on: 2017-10-19, 18:54:54 »

Hello everyone,

I am also interested in keeping this project alive and even evolving it.

I don't use FB, but we do have a private slack (mattermost), I've created a team 'KloxoMR' where we can gather and discuss the future of KloxoMR

Team invite link: https://team.kimeralive.com:8088/signup_user_complete/?id=1tr4485kqidhfxcybi6eey5u8h

I hope there is enough interest so we can discuss it further.

Cheers!

3

Kloxo-MR Bugs and Requests / Re: email did not encrypt this message (Gmail) TlS issue

« on: 2016-10-17, 02:34:04 »

I had this issue on both KloxoMR 6.5 and KloxoMR 7, spereira tip was spot on! 

In case anyone is still stumped by this like I was for a long time, here is the solution:

You have to remove the folder /var/qmail/control/tlshosts or rename it to something else and then TLS starts working for all outgoing mail, shouldn't even need to restart Qmail.

Gmail shows that mail is encrypted and CheckTLS Sender test is also successful.

From http://wiki.qmailtoaster.com/index.php/Tlshosts/exhaustivelist:

man qmail-remote excerpt:

If this file exists no TLS will be tried on hosts other than those for which a file tlshosts/FQDN.pem exists.

4

Kloxo-MR Technical Helps / Re: Kloxo 7 and Amazon SES

« on: 2016-10-17, 02:32:00 »

Thanks for pointing me in the right direction!! 

You do have to remove the folder /var/qmail/control/tlshosts or rename it to something else and then TLS starts working for all outgoing mail, shouldn't even need to restart Qmail.

From http://wiki.qmailtoaster.com/index.php/Tlshosts/exhaustivelist:

man qmail-remote excerpt:

If this file exists no TLS will be tried on hosts other than those for which a file tlshosts/FQDN.pem exists.

5

Kloxo-MR Technical Helps / Re: IMAP IDLE

« on: 2014-11-17, 18:24:59 »

Hello,

I also would very much like to get IMAP Push working.

I see that courier-imap has been updated (thank you Mustafa)

Code: [Select]

# ldd /usr/bin/imapd
        linux-vdso.so.1 =>  (0x00007fffc8780000)
        libfam.so.0 => /usr/lib64/libfam.so.0 (0x00007fcacb138000)
        libgdbm.so.2 => /usr/lib64/libgdbm.so.2 (0x00007fcacaf31000)
        libcourierauth.so.0 => /usr/lib64/courier-authlib/libcourierauth.so.0 (0x00007fcacad26000)
        libc.so.6 => /lib64/libc.so.6 (0x00007fcaca992000)
        /lib64/ld-linux-x86-64.so.2 (0x00007fcacb34b000)
I have also changed 'IMAP_ENHANCEDIDLE=0' to 'IMAP_ENHANCEDIDLE=1' inside '/etc/courier/imapd'

Still no push notifications using Android's K9 Mail.. 

6

Kloxo-MR Technical Helps / Re: How to transfer entire kloxo-mr setup from one server to another?

« on: 2014-11-17, 17:53:18 »

Hello,

To move everything from one server to another:

Old server
- make an admin backup of everything
- backup the kloxo database

New server
-install Kloxo MR (same version)
-Restore Kloxo database (so you'll get all the DNS templates, resource templates, etc)
-Restore the Admin backup normally to restore all accounts.

I have done this quite a few times without issues, you don't need to mess with master/slave configurations.

7

Kloxo-MR Technical Helps / Re: install APC (Alternate PHP Cache)

« on: 2014-11-17, 17:45:03 »

Hello,

I made a script to install APC on Kloxo MR Official a while ago that should work for you.

http://forum.mratwork.com/kloxo-mr-technical-helps/script-install-apc-when-running-apache-php-fpm-%28with-or-without-varnish

It hasn't been updated since, so use at your own risk.

8

Kloxo-MR Tips and Tricks / Re: sendmail userid usage limits [script v1.1b]

« on: 2014-09-18, 17:31:15 »

Hello chrisf, I'm using your script and it works great, mails start to get dropped when the limit is reached and I get the notification e-mail, so thank you alot for this!

I am however not sure how to add users to the groups even after reading the instructions.

Could you provide an example of the configuration as such:

userA should belong to group 1
userB should belong to group 2

how would this look in the config file?

thanks again!

9

Kloxo-MR Technical Helps / Re: How to disable DKIM after being enabled

« on: 2014-08-18, 23:57:00 »

Ok, it's not an issue, only on our mail servers.

This one sends around 40K twice a week.  All to subscribed users I should add.

the load starts piling up, nothing crashes but send rate goes down and even the web site slows down a bit after a while.

10

Kloxo-MR Technical Helps / Re: How to disable DKIM after being enabled

« on: 2014-08-18, 23:26:16 »

Thanks a lot for this fix.

I wish I didn't have to disable it but it is simply too heavy on CPU resources when a newsletter is being sent.

Cheers!


P.S. by the way..  does your sendmail wrapper help with performance in this context?

11

Kloxo-MR Technical Helps / Re: [URGENT] Mail spam source

« on: 2014-08-18, 22:14:40 »

Thank you chrisf !

I will check your script!

12

Kloxo-MR Technical Helps / Re: [URGENT] Mail spam source

« on: 2014-08-18, 19:49:04 »

Yes, I block the mail function inside the Control Panel's main PHP configuration, just add it to the disabled functions area.

Check your mail queue, there should be plenty of e-mails there to inspect.

13

Kloxo-MR Technical Helps / How to disable DKIM after being enabled

« on: 2014-08-18, 17:08:44 »

Hello,

I need to disable DKIM signing for one of our servers, I've tried via the Kloxo Control Panel but it doesn't seem to do much, from what I've read here, it seems that after a patch it is always enabled.
I really need a way to disable it and keep qmail working.. 

Here is my sysinfo:

A. Kloxo-MR: 6.5.0.f-2014070901

B. OS: CentOS release 6.5 (Final) x86_64

C. Apps:
   1. MySQL: mysql55-5.5.38-1.ius.el6.x86_64
   2. PHP: php53u-5.3.28-5.ius.el6.x86_64
   3. Httpd: httpd-2.2.27-1.mr.e6.x86_64
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.5.7-1.el6.x86_64
   6. Qmail: qmail-toaster-1.03-1.3.38.mr.el6.x86_64
      - with: courier-imap-toaster-4.1.2-1.3.16.mr.el6.x86_64
   7. Dns: bind-9.9.5-1.el6.x86_64

D. Php-type (for Httpd/proxy): php-fpm_worker

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:         24099       6202      17897          0          0       5393
   -/+ buffers/cache:        808      23291
   Swap:          512         38        473


Thank you

14

Kloxo-MR Technical Helps / Re: [URGENT] Mail spam source

« on: 2014-08-18, 17:04:58 »

Hello,

First you should disable the PHP Mail () function and have the websites use SMTP for forms, etc.

I'm assuming there's a script sending e-mails and that the issue is not a compromised email account.

After that, there are several things you can do to try to find that script.

lsof -c httpd  is a good start if it is happening right now.

15

Kloxo-MR Releases / Re: [UPDATE] Please update to 6.5.0.f/6.5.1.b to 201405102/201405104

« on: 2014-05-12, 20:24:39 »

I was able to fix the issue, for those who maybe facing the same issue with PHP 5.4 + PHP-FPM on the Kloxo MR Stable here is what I had to do:

(Make sure you're using PHP 5.4 in the webserver config of the control panel)

- on mratwork.repo  add/modify:

Code: [Select]

[mratwork-ius]
name=MRatWork - IUS Community Packages for EL $releasever - arch
baseurl=http://dl.iuscommunity.org/pub/ius/stable/Redhat/$releasever/$basearch
mirrorlist=http://dmirr.iuscommunity.org/mirrorlist/?repo=ius-el$releasever&arch=$basearch
enabled=1
gpgcheck=0
exclude=php52* mysql51* php53* php54*

[mratwork-ius-archive]
name=MRatWork - IUS Community Packages for EL $releasever (archive) - arch
baseurl=http://dl.iuscommunity.org/pub/ius/archive/Redhat/$releasever/$basearch
enabled=1
gpgcheck=0
exclude=mysql51* php53*-5.3.28* php54*-5.4.28

- then run the following:

Code: [Select]

yum clean all
yum downgrade php54*
sh /script/restart-web
If all goes well you should be on PHP 5.4.(x86_64 0:5.4.27-1.ius.el6)  and PHP-FPM should be working.

Note: This should also work for PHP 5.3 but I did not test it.