php53u not installed

[zedzaed]

i try to change php54 to php53 but fail

Error: Package 'php53u' is not installed.

[zedzaed]

website cant open

Error 404 - Not Found

barangpower.xyz

[MRatWork]

Try change from ssh with 'yum replace php54 --replace-with=php53u'.

Any reason using php 5.3 instead php 5.4?.

[zedzaed]

change already..

but why website still php 404 not found error...

[MRatWork]

Go to 'admin > switch program' and then select all to 'none' and then select back to 'nginx-proxy', 'none', 'nsd' and 'bogofilter'. The same way with 'php type' in 'webserver configure' where change to 'suphp_event' and then change to 'php-fpm_event'.

[zedzaed]

ok.. already configure no error 404 but still not show up website


f you are seeing this page, it means that web has not been configured for this domain on this server.

This could be due to the following causes:
Kloxo has not restarted the web server yet after you added the domain. Please wait for the web server to restart.
 
The domain is pointing to the wrong Kloxo server. Ping the domain and make sure that the IP matches one of the IPaddress seen in admin home -> ipaddresses
 
If you are seeing this page when you try to access an IP like http://192.168.1.1, then that means that the IP has not yet been mapped to a domain. Go to client home -> ipaddresses -> ipaddress home -> domain config and map an IP to a domain.
 
Once you map an IP to a domain, then you have to make sure that the domain pings back to the same IP. Otherwise, if you try to access the domain, you will get this page. So IP -> domain.com should mean that domain.com pings to the same IP.

[MRatWork]

Try 'sh /script/fix-all; sh /script/restart-all -y'. If found error in restart step, try reboot.

[zedzaed]

ok solve...

another prbelm... webmail cant send email
ERROR:
Message not sent

[MRatWork]

Did you read http://forum.mratwork.com/kloxo-mr-tips-and-tricks/(tip)-how-to-setup-qmail-on-kloxo-mr/ before?

[zedzaed]

 i dont know how to do this

[zedzaed]

[root@vmi38877 ~]# /etc/host
-bash: /etc/host: No such file or directory

[MRatWork]

Inform here 'hostname; hostname -s; cat /etc/hosts'.

[zedzaed]

hostname; hostname -s; cat /etc/hosts
vmi38877
vmi38877
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
5.189.143.108 vmi38877.contabo.host vmi38877
### begin - add by Kloxo-MR

5.189.143.108 vmi38877 vmi38877

### end - add by Kloxo-MR


how to change

[MRatWork]

This is info from my dev server:

Code: [Select]

> hostname; hostname -s; cat /etc/hosts
xl3.mratwork.com
xl3
127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4
# Auto-generated hostname. Please do not remove this comment.
45.62.125.158 xl3.mratwork.com  xl3
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
### begin - add by Kloxo-MR

45.62.125.158 xl3.mratwork.com xl3

### end - add by Kloxo-MR

So, that mean:
- 'hostname' (or 'hostname -f') = xl3.mratwork.com
- 'hostname -s' = xl3
- all hostname will be declare in /etc/hosts as '45.62.125.158 xl3.mratwork.com xl3'

So, you need change hostname in contabo panel like 'server1.yourdomain.com' and then reboot your vps. After that, modified /etc/hosts from '5.189.143.108 vmi38877 vmi38877' to '5.189.143.108 server1.yourdomain.com server1'. And then run 'sh /script/fix-all; sh /script/restart-all -y'

[zedzaed]

yes.. i understand that..

but how to change it?
change use ssh or kloxo panel?