I tried MANY TIMES but still can not successfully install Kloxo-MR, why?

[baijianpeng]

After reading some introduction articles about Kloxo-MR, I think this is a great Control Panel for me. But, I tried many times to install it on my CentOS 64 bit, it just can not be done!

I followed this installation guide because the official one on Github (how-to-install.txt) is very bad:

http://lintut.com/how-to-install-kloxomr-on-centos-5-x6-x-32-or-64-bit/

Yes, I am doing fresh install, because I had formated my VPS many times to get a fresh CentOS, just in order to get Kloxo-MR installed !

All steps executed without problem until this step:

Code: [Select]

# yum install kloxomr -y
There flys many messages then the end is:

Code: [Select]

http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 12] Timeout on http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/primary.sqlite.bz2: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Trying other mirror.
Error: failure: repodata/primary.sqlite.bz2 from mratwork-ius-archive: [Errno 256] No more mirrors to try.
I even tried "yum clean all" to solve this "no more mirrors to try" issue, this command was executed successfully.

Then I input "yum makecache" and run, it ended up with:

Code: [Select]

http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/filelists.sqlite.bz2: [Errno 12] Timeout on http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/filelists.sqlite.bz2: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Trying other mirror.
http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 12] Timeout on http://dl.iuscommunity.org/pub/ius/archive/Redhat/6/x86_64/repodata/primary.sqlite.bz2: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Trying other mirror.
Error: failure: repodata/primary.sqlite.bz2 from mratwork-ius-archive: [Errno 256] No more mirrors to try.

My God! This is driving me crazy! I crashed my head on the wall many times but I still don't know how to install Kloxo-MR !

( By the way, I tried to install webmin , another CPanel, the installation is very fast and smooth. )

Could you please make the installation of Kloxo-MR easier?

Did I missed anything?

Can someone here help me to install Kloxo-MR ?

Thank you in advance.

[baijianpeng]

something to add:

I noticed that when executing "yum update -y" , it is very very very slow for following files:

Code: [Select]

mratwork-ius-archive/primary_db

mratwork-ius-archive/filelists_db

When up to these two files, the process will end up with "no more mirrors to try".

Why these two files are so SLOW ?

Is there any other mirror I can try?

Could you please distribute these files on more mirrors?

Thank you.

[MRatWork]

Follow 'https://github.com/mustafaramadhan/kloxo/blob/dev/how-to-install.txt'.

If want using Kloxo-MR 7.0.0.b, using 'yum install kloxomr7 -y' instead 'yum install kloxomr -y'

[kennethwu]

Follow 'https://github.com/mustafaramadhan/kloxo/blob/dev/how-to-install.txt'.

If want using Kloxo-MR 7.0.0.b, using 'yum install kloxomr7 -y' instead 'yum install kloxomr -y'

7.0 have been released?? is that support Centos 7? Have it solve the spam problems that affect the mail receive?

[MRatWork]

CentOS 7 still not support because still lack for many rpms.

Kloxo-MR 7 is 'rename' for Kloxo-MR 6.5.1.

[kennethwu]

CentOS 7 still not support because still lack for many rpms.

Kloxo-MR 7 is 'rename' for Kloxo-MR 6.5.1.

Means that MR7 is equal to 6.5.1, right?

[MRatWork]

Yes, it's the same. Many reasons to change 6.5.1 to 7.0.0.

[kennethwu]

Yes, it's the same. Many reasons to change 6.5.1 to 7.0.0.

I have tried to install the kloxomr7 in my china server but it's have a problem as listed below:

[root@yswlcentos /]# yum install kloxomr7 -y
Loaded plugins: priorities, security
mratwork-ius-stable/primary_db                                 | 148 kB     00:00     
http://dl.iuscommunity.org/pub/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno -1] Metadata file does not match checksum
Trying other mirror.
mratwork-ius-stable/primary_db                                 | 148 kB     00:00     
http://syd.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno -1] Metadata file does not match checksum
Trying other mirror.
http://hkg.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://ftp.neowiz.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://download.srv.ro/pub/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://ftp.astral.ro/mirrors/iuscommunity.org/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://mirror.amsiohosting.net/iuscommunity.org/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://ius.cu.be/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
mratwork-ius-stable/primary_db                                 | 297 kB     00:00     
http://mirror.sothatswhy.org.uk/pub/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno -1] Metadata file does not match checksum
Trying other mirror.
http://mirrors.ircam.fr/pub/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://dfw.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://mirror.symnds.com/distributions/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://lon.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://ftp.rediris.es/mirror/IUS_Community/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://ord.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://archive.linux.duke.edu/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://iad.mirror.rackspace.com/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
http://mirror.its.dal.ca/ius/stable/Redhat/6/x86_64/repodata/primary.sqlite.bz2: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Trying other mirror.
Error: failure: repodata/primary.sqlite.bz2 from mratwork-ius-stable: [Errno 256] No more mirrors to try.

How i can solve this , please advise

[MRatWork]

if you found 'Metadata file does not match checksum' error, try 'cd /' and then 'yum clean all' (3-4 times) before install process.