Help. Not started iptables

[lutuy]

I have Centos 6.3
I installed Kloxo-MR
Displayed instead of the site php code of the page
And not started service php-fpm and iptables

[MRatWork]

Try 'sh /script/fixweb; sh /script/restart-services'.

For Iptables, you need '/etc/sysconfig/iptables.conf'. Iptables not running because you don't have this file. Remember, bad iptables.conf content make your server not able to accessed. Careful for iptables.

[lutuy]

does not help. Displayed instead of the site php code  
My file /etc/sysconfig/iptables.conf

Code: [Select]

# Load additional iptables modules (nat helpers)
#   Default: -none-
# Space separated list of nat helpers (e.g. 'ip_nat_ftp ip_nat_irc'), which
# are loaded after the firewall rules are applied. Options for the helpers are
# stored in /etc/modprobe.conf.
IPTABLES_MODULES=""

# Unload modules on restart and stop
#   Value: yes|no,  default: yes
# This option has to be 'yes' to get to a sane state for a firewall
# restart or stop. Only set to 'no' if there are problems unloading netfilter
# modules.
IPTABLES_MODULES_UNLOAD="yes"

# Save current firewall rules on stop.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/iptables if firewall gets stopped
# (e.g. on system shutdown).
IPTABLES_SAVE_ON_STOP="no"

# Save current firewall rules on restart.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/iptables if firewall gets
# restarted.
IPTABLES_SAVE_ON_RESTART="no"

# Save (and restore) rule and chain counter.
#   Value: yes|no,  default: no
# Save counters for rules and chains to /etc/sysconfig/iptables if
# 'service iptables save' is called or on stop or restart if SAVE_ON_STOP or
# SAVE_ON_RESTART is enabled.
IPTABLES_SAVE_COUNTER="no"

# Numeric status output
#   Value: yes|no,  default: yes
# Print IP addresses and port numbers in numeric format in the status output.
IPTABLES_STATUS_NUMERIC="yes"

# Verbose status output
#   Value: yes|no,  default: yes
# Print info about the number of packets and bytes plus the "input-" and
# "outputdevice" in the status output.
IPTABLES_STATUS_VERBOSE="no"

# Status output with numbered lines
#   Value: yes|no,  default: yes
# Print a counter/number for every rule in the status output.
IPTABLES_STATUS_LINENUMBERS="yes"

[MRatWork]

Sorry, I mean 'iptables' file instead 'iptables-config'.

I don't care about iptables. In my servers always off.

[lutuy]

Sorry, I mean 'iptables' file instead 'iptables-config'.

I don't care about iptables. In my servers always off.

Why instead of the site text?
On the home page opens PHP code
How can I fix it?

[MRatWork]

Have you add domain?. Then change web server, php-branch and php-type?. Then run 'sh /script/fixweb; sh /script/restart-services'?