Kloxo is freezing after latest changes

[Spacedust]

This is weird !!!

==> HTTP <==
State is now:   ERROR    (20:40h 2014.02.02)
State before:   OK       (was about 3 hours)
Service params: port=7778 path=/ hostname=host.pl Service uptime: 99.58% Check output:
  >  timeout after 25 seconds - execution expired


==> HTTP <==
State is now:   ERROR    (20:40h 2014.02.02)
State before:   OK       (was about 3 hours)
Service params: ssl=1 port=7777 path=/ hostname=host.pl Service uptime: 99.65% Check output:
  >  timeout after 25 seconds - execution expired

Then:

==> HTTP <==
State is now:   OK       (17:57h 2014.02.02)
State before:   ERROR    (was 3 minutes)
Service params: port=7778 path=/ hostname=host.pl Service uptime: 99.58% Check output:
  >  OK, 0 bytes received (statuscode=302)


==> HTTP <==
State is now:   OK       (17:57h 2014.02.02)
State before:   ERROR    (was 3 minutes)
Service params: ssl=1 port=7777 path=/ hostname=host.pl Service uptime: 99.65% Check output:
  >  OK, 53 bytes received (statuscode=200)

[Spacedust]

The spawn-fcgi is unstable. I've restored the previous config and all works fine !

[MRatWork]

Previous config is using 'root:root'. Spawn-fcgi using 'lxlabs:lxlabs'.

In /etc/rc.d/init.d/kloxo, try modified 'phpcgi_child="1"' to 'phpcgi_child="5"'

[Spacedust]

Previous config is using 'root:root'. Spawn-fcgi using 'lxlabs:lxlabs'.

In /etc/rc.d/init.d/kloxo, try modified 'phpcgi_child="1"' to 'phpcgi_child="5"'

OK. This should help. I will let you know.

[MRatWork]

For your issue, copy /usr/local/lxlabs/kloxo/init/kloxo.init to /usr/local/lxlabs/kloxo/init/custom.kloxo.init and then modified custom.kloxo.init. Update will not replace your /etc/rc.d/init.d/kloxo because always using custom.kloxo.init.

[Spacedust]

For your issue, copy /usr/local/lxlabs/kloxo/init/kloxo.init to /usr/local/lxlabs/kloxo/init/custom.kloxo.init and then modified custom.kloxo.init. Update will not replace your /etc/rc.d/init.d/kloxo because always using custom.kloxo.init.

Thanks good to know ! Should I do the same for slave ?

[MRatWork]

Why not?.

[Spacedust]

OK. So far working ok so it's worth to change this permanently.

[Spacedust]

Still working fine, please add it to the repo Mustafa !