Akses web lancar namun tak bisa akses panel 7778

[kacank87]

mohon bantuannya mastah
disini sangat ane tiba2 ga bisa akses panel 7778
pahdal sudah saya cleanup

sh /script/upcp
sh /script/cleanup
 /etc/init.d/kloxo restart

hasilnya :

*** Restart services - BEGIN ***
Stopping mysqld:                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
Stopping Djbdns for:
  - axfrdns    [  OK  ]
  - tinydns    [  OK  ]
Starting Djbdns for:
  - axfrdns    [FAILED]
  - tinydns    [FAILED]
Stopping httpd:                                            [  OK  ]
Starting httpd:                                            [  OK  ]
Stopping nginx:                                            [  OK  ]
Starting nginx:                                            [  OK  ]
Stopping Hiawatha web server:                              [FAILED]
Stopping qmail-toaster: svscan qmail logging.
qmail-send: no process killed
Starting qmail-toaster: svscan.
Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
Stopping kloxo-phpcgi:                                     [FAILED]
Starting kloxo-phpcgi:                                     [  OK  ]
Stopping kloxo-hiawatha:                                   [FAILED]
Starting kloxo-hiawatha: Syntax error in hiawatha.conf on line 57.
                                                           [FAILED]
Stopping php-fpm:                                          [  OK  ]
Starting php-fpm:                                          [  OK  ]
*** Restart services - END ***

namun masih tetap
please help

[zenkul]

lho kenapa ada perintah "sh /script/upcp" , ini perintah install ulang kloxo-mr


hiawatha yang untuk kloxo tidak mau jalan, itu error "Starting kloxo-hiawatha: Syntax error in hiawatha.conf on line 57."


coba  reboot

[MRatWork]

Sebenarnya, upcp hanya beda sedikit dengan cleanup. Jika install ulang gunakan 'upcp -y' (ada tambahan '-y').

Ini pakai Kloxo-MR 6.5 atau 7.0?.

[kacank87]

kloxo 6.5 gan

[MRatWork]

Coba tampilkan file terkait dengan 'cat /usr/local/lxlabs/kloxo/init/hiawatha.conf'.

Bisa jadi hiawatha belum pakai versi 10.1. Coba infokan 'yum list installed hiawatha'.

[kacank87]

Coba tampilkan file terkait dengan 'cat /usr/local/lxlabs/kloxo/init/hiawatha.conf'.

Bisa jadi hiawatha belum pakai versi 10.1. Coba infokan 'yum list installed hiawatha'.

# Hiawatha main configuration file
#

ServerString = Hiawatha for Kloxo-MR

ServerId = lxlabs
ConnectionsTotal = 2048
ConnectionsPerIP = 64
SystemLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-system.log
GarbageLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-garbage.log

MaxUrlLength = 65536

PIDfile = /var/run/kloxo-hiawatha.pid

BanOnGarbage = 300
BanOnMaxPerIP = 60
BanOnMaxReqSize = 300
KickOnBan = yes
RebanDuringBan = yes

ThreadPoolSize = 50

#CGIhandler = /opt/php52s/bin/php-cgi:php
#ExecuteCGI = yes
WaitForCGI = yes

FastCGIserver {
        FastCGIid = PHP5
        ConnectTo = /usr/local/lxlabs/kloxo/init/kloxo-phpcgi.sock
        Extension = php
}

MimetypeConfig = hiawatha-mimetype.conf

Binding {
        BindingId = port_nonssl
        Port = 7778
        #Interface = 0.0.0.0
        MaxKeepAlive = 3600
        TimeForRequest = 3600
        MaxRequestSize = 102400
        ## not able more than 100MB; hiawatha-9.3-2 able until 2GB
        MaxUploadSize = 2000
}

Binding {
        BindingId = port_ssl
        Port = 7777
        #Interface = 0.0.0.0
        MaxKeepAlive = 3600
        TimeForRequest = 3600
        MaxRequestSize = 102400
        ## not able more than 100MB; hiawatha-9.3-2 able until 2GB
        MaxUploadSize = 2000
        #RequiredCA = /usr/local/lxlabs/kloxo/etc/program.ca
        SSLcertFile = /usr/local/lxlabs/kloxo/etc/program.pem
}

Hostname = 0.0.0.0
WebsiteRoot = /usr/local/lxlabs/kloxo/httpdocs
StartFile = index.php
AccessLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-access.log
ErrorLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-error.log

UseFastCGI = PHP5

TimeForCGI = 3600
ErrorHandler = 401:/error/401.html
ErrorHandler = 403:/error/403.html
#ErrorHandler = 404:/error/404.html
ErrorHandler = 404:/htmllib/lbin/sitepreview.php
ErrorHandler = 501:/error/501.html
ErrorHandler = 503:/error/503.html

VirtualHost {
        #RequiredBinding = port7777
        RequireSSL = yes

        Hostname = 0.0.0.0
        WebsiteRoot = /usr/local/lxlabs/kloxo/httpdocs
        StartFile = index.php
        AccessLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-access.log
        ErrorLogfile = /usr/local/lxlabs/kloxo/log/hiawatha-error.log

        ## MR -- disable this UseFastCGI with # in front and create blank '/usr/local/lxlabs/kloxo/init/kloxo_use_php-cgi' file
        ## if want use php-cgi without spawn-fcgi (less memory usage)
        UseFastCGI = PHP5

        TimeForCGI = 3600
        ErrorHandler = 401:/error/401.html
        ErrorHandler = 403:/error/403.html
        #ErrorHandler = 404:/error/404.html
        ErrorHandler = 404:/htmllib/lbin/sitepreview.php
        ErrorHandler = 501:/error/501.html
        ErrorHandler = 503:/error/503.html

Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
 * base: mirrors.sonic.net
 * extras: mirror.hostduplex.com
 * mratwork-epel: mirrors.kernel.org
 * mratwork-ius-stable: dfw.mirror.rackspace.com
 * mratwork-webtatic: repo.webtatic.com
 * updates: dallas.tx.mirror.xygenhosting.com
0 packages excluded due to repository protections
Installed Packages
hiawatha.x86_64         10.1.0-f.6.mr.el6         @mratwork-release-version-arch

[MRatWork]

Kelihatannya Kloxo-MR 6.5 masih pakai yang lama. Infokan 'sh /script/version --vertype=full'.

Atau coba ganti semua 'SSL' ke 'TLS' (misalnya SSLcertFile ke TLScertFile pada hiawatha.conf.base dan kemudian lakukan 'sh /script/restart'.

[kacank87]

6.5.0.f-2015083001

[MRatWork]

Anda perlu update Kloxo-MR 6.5 anda dengan 'yum clean all; yum update -y'

[kacank87]

sudah saya lakukan dan tetap tidak bisa mastah

[MRatWork]

Apa Kloxo-MR sudah di-restart?.

[kacank87]

sudah mastah
tentunya selalu saya restat kalo hbis update
namun tetap tidak bisa
apa bisa bantu langsung mastah ?
saya send PM password root nya

[MRatWork]

Silahkan PM.

[kacank87]

sudah saya PM mastah

[MRatWork]

Kloxo-MR anda belum diupdate. Lakukan 'yum clean all; yum update -y; sh /script/cleanup'.