Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2019-04-26, 12:12:02

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - labpros

Pages: 1 2 [3] 4 5
31
Hi, aftter Update,
mail server is not working. The mail client can not connect to the server. This is the message of the thunderbird
"Sending of message failed.
The message could not be sent because the connection to SMTP server mail......com timed out. Try again or contact your network administrator."


32
Kloxo-MR Technical Helps / Re: PHP 5.3+ is required
« on: 2014-05-19, 17:56:16 »
It works,  thanks

33
Kloxo-MR Technical Helps / PHP 5.3+ is required
« on: 2014-05-19, 17:19:17 »
i try to open phpmyadmin and i get this message,
i have change from 5.3 to 5.4 and i get the same message

34
Kloxo-MR Technical Helps / Re: Installation cruch
« on: 2014-05-08, 16:23:48 »
Yes but i have another kloxo-mr installation which is working fine from last november or december, off course this server has 2 gb ram.
Does i have to buy a vps with more ram? or a xen vps?

35
Kloxo-MR Technical Helps / Re: Installation cruch
« on: 2014-05-08, 11:35:37 »
hi Mustafa,
any news?

36
Kloxo-MR Technical Helps / Re: Installation cruch
« on: 2014-05-07, 01:15:33 »
Yes it is openvz

free -m
                                    total       used       free     shared    buffers     cached
Mem:                            512        502          9          0          0          0
-/+ buffers/cache:                       502          9
Swap:                            0          0          0

37
Kloxo-MR Technical Helps / Installation cruch
« on: 2014-05-06, 01:56:03 »
I have tried to install kloxo-mr to a new server but always the same result:

Starting kloxo-hiawatha: Error loading RSA private key (-0x2E00): PK - Read/write of file failed

I tried with centos 6-64, 6-32, 5-64, 5-32 but i couldn't complete the installation.

Any ideas?

38
Kloxo-MR Technical Helps / kloxo-mr doesn't use the all disk
« on: 2014-04-19, 19:44:58 »
Hi,
i have a 100gb vps i have check it by linux command line too, but kloxo use only 30gb, any thoughts?

39
Kloxo-MR Technical Helps / Re: node pci
« on: 2014-02-08, 18:22:11 »
I found this

Quote
Most people think that if they have a SSL certificate (i.e. there’s a lock in the browser) then they are PCI Compliant. Not true. Did you know that if you have FTP access to your website, then you are automatically disqualified from being PCI Compliant (SAQ C). Also, if your database server is on the same machine as your web server (most are), you also can’t pass the PCI test.

http://www.mijireh.com/integrations/woocommerce/

40
Kloxo-MR Technical Helps / Re: Antivirus
« on: 2014-02-07, 19:10:31 »
Are you sure that clam antivirus is installed, because this command

Code: [Select]
/etc/init.d/clamd start

returns
-bash: /etc/init.d/clamd: No such file or directory

41
Kloxo-MR Technical Helps / node pci
« on: 2014-02-07, 18:45:57 »
Hi,
Is my kloxo-mr node pci compliance? if not what do i need?

42
Kloxo-MR Technical Helps / Re: load balancing
« on: 2014-02-05, 16:14:30 »
Thanks for your answer Mustafa,
but do you have any kind of this config that it needs,
i think it will be useful for many people here

43
Kloxo-MR Technical Helps / load balancing
« on: 2014-02-05, 14:15:29 »
Hi,
how can i setup a load balanced network with two or more kloxo-mr vps servers?

Is that possible?

44
Kloxo-MR Technical Helps / Re: php versions
« on: 2014-01-30, 18:33:28 »
Code: [Select]

[root@vps ~]# sh /script/cleanup
Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
 * base: mirror.proserve.nl
 * extras: ftp.nluug.nl
 * mratwork-epel: mirror.proserve.nl
 * mratwork-ius: ius.cu.be
 * updates: mirror.widexs.nl
0 packages excluded due to repository protections
Setting up Update Process
No Packages marked for Update
*** Executing Update (cleanup) - BEGIN ***
Fix Database Issues
- Fix admin account database settings
- Set default database settings
- Fix resourceplan settings in database
- Alter some database tables to fit that of Kloxo
- Set default welcome text at Kloxo login page
- Remove default db password if exists
- Create flag dir
Fix IP Address
- Fix process
Fix Services
- Fix process
Create domain backup dirs
- Create process
- Create OS system user admin
- User admin exists
Set Watchdog defaults
- Set process
Fix MySQL root password
- Fix process
Set admin contact email
- Set process
Get Kloxo License info
- Get process
- Create database interface template (Forced)
Fix Self SSL
- Fix process
Prepare for Kloxo
- OS Create Kloxo init.d service file
- OS Fix programroot path permissions
- OS Restart Kloxo service
Check for bogofilter
- wordlist.db already exists
Remove Old dirs
- Remove process
Initialize Some Binary files
- php-cgi binary already installed
- Symlink /usr/local/bin/php already exists
Remove lighttpd errorlog
- Remove process
Fix the secure logfile
- Fix process
Clean hosts.deny
- Clean process
Killing gettraffic system process
- Killing process
Update Services Branch List
- List for 'dns' branch
- List for 'dovecot' branch
- List for 'httpd' branch
- List for 'lighttpd' branch
- List for 'mysql' branch
- List for 'nginx' branch
- List for 'php' branch
- List for 'qmail' branch
Checking for rpm packages
- For autorespond-toaster package
- For courier-authlib-toaster package
- For courier-imap-toaster package
- For daemontools-toaster package
- For ezmlm-toaster package
- For libdomainkeys-toaster package
- For libsrs2-toaster package
- For maildrop-toaster package
- For qmail-pop3d-toaster package
- For qmail-toaster package
- For ripmime-toaster package
- For ucspi-tcp-toaster package
- For vpopmail-toaster package
- For fetchmail package
- For bogofilter package
- For spamdyke package
- For spamdyke-utils package
- For pure-ftpd package
- For php package
- For php-mbstring package
- For php-mysql package
- For php-pear package
- For php-pecl-geoip package
- For php-pecl-imagick package
- For php-gd package
- For php-mcrypt package
- For php-xml package
- For php-bcmath package
- For php-pgsql package
- For webalizer package
- For dos2unix package
- For rrdtool package
- For xinetd package
- For lxjailshell package
Initialize /script/ dir
- Initialize processes
Install Kloxo service
- Install process
Installing jailshell to system
- Already exists
Set /home permission to 0755
- Set process
- chown apache:apache FOR /home/kloxo/httpd/ AND INSIDE
- chmod 644 FOR *.php* INSIDE /home/kloxo/httpd/
- chmod 755 FOR *.pl* INSIDE /home/kloxo/httpd/
- chmod 755 FOR /home/kloxo/httpd/ AND INSIDE
- chmod 771 FOR /home/kloxo/httpd/
Enable xinetd service
- Enable process
Fix suexec
- Fix process
Install/Fix Services/Permissions/Configfiles
- Set permissions for /usr/bin/php-cgi
- Set permissions for closeinput binary
- Set permissions for phpsuexec.sh script
- Set permissions for /var/lib/php/session/ dir
- Set permissions for /var/bogofilter/ dir
- Kill sisinfoc system process
Execute/remove/initialize/install script
- Execute vpopmail.sh
- Remove /home/kloxo/httpd/script dir
- Initialize /home/kloxo/httpd/script dir
- Set ownership apache:apache for /home/kloxo/httpd/script dir
- Install phpinfo.php into /home/kloxo/httpd/script dir
Enable the correct drivers (Service daemons)
- Uninstall spam__spamassassin
- Uninstall dns__djbdns
- Uninstall dns__maradns
- Uninstall dns__pdns
- Uninstall web__lighttpd
- Uninstall web__nginx
Remove cache dir
- Remove process
Restart syslog service
- Restart process
Initialize awstats dirdata
- Initialize process
Update Kloxo database
- Updating process
Remove old lxlabs ssh key
- Remove process
Preparing MySQL/MariaDB service
- MySQL activated
Updating Core packages
- New httpd* lighttpd* nginx* hiawatha* version installed
- New mod_* mysql* mariadb* MariaDB* php* version installed
- New bind* djbdns* maradns* pdns* nsd* version installed
- New pure-ftpd* *-toaster bogofilter version installed
- New kloxomr-webmail-*.noarch version installed
- New kloxomr-addon-*.noarch version installed
- New kloxomr-thirdparty-*.noarch version installed
Preparing some services again
- qmail enabled and restart queue
Add 'hostname' information to '/etc/hosts'
- Add ip, short and full name of 'hostname'
Initialize some skeletons
- Php files for default web page
- Skeleton for default web page
- Php files for disable web page
- Skeleton for disable web page
- Php files for webmail web page
- Skeleton for webmail web page
- Php files for cp web page
- Skeleton for cp web page
- chown apache:apache FOR /home/kloxo/httpd/ AND INSIDE
- chmod 644 FOR *.php* INSIDE /home/kloxo/httpd/
- chmod 755 FOR *.pl* INSIDE /home/kloxo/httpd/
- chmod 755 FOR /home/kloxo/httpd/ AND INSIDE
- chmod 771 FOR /home/kloxo/httpd/
- Php files for login web page
- Skeleton for login web page
- No exists user-skeleton
- No exists user-logo
Initialize phpMyAdmin configfile
- phpMyAdmin: Set db password in configfile
Initialize OS admin account description
- Initialize process
Copy all contents of bind
- Copy /usr/local/lxlabs/kloxo/file/bind to /home/bind
- Copy /home/bind/etc/conf/named.conf to /etc//named.conf
Copy all contents of djbdns
- Copy /usr/local/lxlabs/kloxo/file/djbdns to /home/djbdns
Initialize apache config
- /etc/httpd/conf.d dir already exists
- /home/apache/tpl dir already exists
- /home/apache/conf dir already exists
- /home/apache/etc dir already exists
- /home/apache/etc/conf dir already exists
- /home/apache/etc/conf.d dir already exists
Copy all contents of apache
- Copy /usr/local/lxlabs/kloxo/file/apache to /home/apache
- Copy /home/apache/etc/conf/httpd.conf to /etc/httpd/conf/httpd.conf
- Copy /home/apache/etc/conf.d/~lxcenter.conf to /etc/httpd/conf.d/~lxcenter.conf
- Copy /home/apache/etc/conf.d/ssl.conf to /etc/httpd/conf.d/ssl.conf
- Copy /home/apache/etc/conf.d/__version.conf to /etc/httpd/conf.d/__version.conf
- chown root:root FOR /home/apache/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /home/apache/
Initialize lighttpd config
- /etc/lighttpd/conf.d dir already exists
- /home/lighttpd/tpl dir already exists
- /home/lighttpd/conf dir already exists
- /home/lighttpd/etc dir already exists
- /home/lighttpd/etc/conf dir already exists
- /home/lighttpd/etc/conf.d dir already exists
Copy all contents of lighttpd
- Copy /usr/local/lxlabs/kloxo/file/lighttpd to /home/lighttpd
- Copy /home/lighttpd/etc/conf/lighttpd.conf to /etc/lighttpd/lighttpd.conf
- Copy /home/lighttpd/etc/conf.d/~lxcenter.conf to /etc/lighttpd/conf.d/~lxcenter.conf
- Copy /home/lighttpd/etc/conf.d/ssl.conf to /etc/lighttpd/conf.d/ssl.conf
- chown root:root FOR /home/lighttpd/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /home/lighttpd/
Initialize nginx config
- /etc/nginx/conf.d dir already exists
- /home/nginx/tpl dir already exists
- /home/nginx/conf dir already exists
- /home/nginx/etc dir already exists
- /home/nginx/etc/conf dir already exists
- /home/nginx/etc/conf.d dir already exists
Copy all contents of nginx
- Copy /usr/local/lxlabs/kloxo/file/nginx to /home/nginx
- Copy /home/nginx/etc/conf/nginx.conf to /etc/nginx/nginx.conf
- Copy /home/nginx/etc/conf.d/~lxcenter.conf to /etc/nginx/conf.d/~lxcenter.conf
- chown root:root FOR /home/nginx/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /home/nginx/
- Install /etc/php-fpm.conf
- Copy php-fpm init to /etc/init.d dir
Initialize PureFtp service
- Initialize process
- Restart xinetd service for pureftp
Initialize logrotate
Preparing RoundCube database
- Fixing MySQL commands in import files
- Generating password
- Add Password to configuration file
- Database installed
Initialize Roundcube files
- Initialize process
Horde webmail no exists
T-Dah webmail no exists
Preparing Afterlogic database
- Fixing MySQL commands in import files
- Generating password
- Add Password to configuration file
- Database installed
Initialize Afterlogic files
- Initialize process
Preparing Squirrelmail Database
- No need database
Initialize Squirrelmail files
- Initialize process
Preparing Telaen Database
- No need database
Initialize Telaen files
- Initialize process
Install Webmail chooser
- Install process
Initialize Mail service
- Initialize process
Fix dns/web/php/mail/ftpuser configs
- Fix dns services
- Fix web services
- Fix php services
- Fix mail services
- Fix ftpuser services
Fixing Hiawatha service
*** Executing Update (cleanup) - END ***

*** Restart services - BEGIN ***
Stopping mysqld:                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
Stopping named:                                            [  OK  ]
Starting named:                                            [  OK  ]
Stopping httpd:                                            [  OK  ]
Starting httpd:                                            [  OK  ]
Stopping qmail-toaster: svscan qmail logging.
Starting qmail-toaster: svscan.
Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
Stopping kloxo-phpcgi:                                     [  OK  ]
Starting kloxo-phpcgi:                                     [  OK  ]
Stopping kloxo-hiawatha:                                   [  OK  ]
Starting kloxo-hiawatha:                                   [  OK  ]
Stopping php-fpm:                                          [  OK  ]
Starting php-fpm:                                          [  OK  ]
*** Restart services - END ***

Process Time: 00:00:01:35.95539 (dd:hh:mm:ss:xxxxxx)



45
Kloxo-MR Technical Helps / Re: php versions
« on: 2014-01-30, 17:42:08 »
these are the results from

yum clean all; yum update

with php 5.3 on system


Code: [Select]
[root@vps ~]# yum clean all; yum update
Loaded plugins: fastestmirror, priorities, protectbase, replace
Cleaning repos: base extras mratwork-centalt mratwork-epel mratwork-ius
              : mratwork-ius-c5 mratwork-litespeed mratwork-litespeed-update
              : mratwork-release-neutral-arch mratwork-release-neutral-noarch
              : mratwork-release-version-arch mratwork-release-version-noarch
              : mratwork-varnish-3.0 updates vz-base vz-updates
Cleaning up Everything
Cleaning up list of fastest mirrors
Loaded plugins: fastestmirror, priorities, protectbase, replace
Determining fastest mirrors
 * base: mirror.proserve.nl
 * extras: ftp.nluug.nl
 * mratwork-epel: mirror.proserve.nl
 * mratwork-ius: ius.cu.be
 * updates: mirror.widexs.nl
base                                                     | 3.7 kB     00:00
base/primary_db                                          | 4.4 MB     00:00
extras                                                   | 3.4 kB     00:00
extras/primary_db                                        |  19 kB     00:00
mratwork-centalt                                         |  951 B     00:00
mratwork-centalt/primary                                 |  86 kB     00:00
mratwork-centalt                                                        269/269
mratwork-epel                                            | 4.2 kB     00:00
mratwork-epel/primary_db                                 | 5.9 MB     00:00
mratwork-ius                                             | 2.1 kB     00:00
mratwork-ius/primary_db                                  | 130 kB     00:00
mratwork-ius-c5                                          | 2.1 kB     00:00
mratwork-ius-c5/primary_db                               | 427 kB     00:00
mratwork-litespeed                                       |  951 B     00:00
mratwork-litespeed/primary                               |  35 kB     00:00
mratwork-litespeed                                                      179/179
mratwork-litespeed-update                                |  951 B     00:00
mratwork-litespeed-update/primary                        |  19 kB     00:00
mratwork-litespeed-update                                                 89/89
mratwork-release-neutral-arch                            |  951 B     00:00
mratwork-release-neutral-arch/primary                    |  856 B     00:00
mratwork-release-neutral-arch                                               1/1
mratwork-release-neutral-noarch                          |  951 B     00:00
mratwork-release-neutral-noarch/primary                  |  15 kB     00:00
mratwork-release-neutral-noarch                                           40/40
mratwork-release-version-arch                            |  951 B     00:00
mratwork-release-version-arch/primary                    |  44 kB     00:00
mratwork-release-version-arch                                             88/88
mratwork-release-version-noarch                          |  951 B     00:00
mratwork-release-version-noarch/primary                  |  957 B     00:00
mratwork-release-version-noarch                                             1/1
mratwork-varnish-3.0                                     |  951 B     00:00
mratwork-varnish-3.0/primary                             | 6.5 kB     00:00
mratwork-varnish-3.0                                                      22/22
updates                                                  | 3.4 kB     00:00
updates/primary_db                                       | 1.4 MB     00:00
vz-base                                                  |  951 B     00:00
vz-base/primary                                          | 1.3 kB     00:00
vz-base                                                                     3/3
vz-updates                                               |  951 B     00:00
vz-updates/primary                                       | 1.7 kB     00:00
vz-updates                                                                  4/4
0 packages excluded due to repository protections
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package apr.x86_64 0:1.3.9-5.el6_2 will be updated
---> Package apr.x86_64 0:1.4.8-1.mr.el6 will be an update
---> Package apr-util.x86_64 0:1.3.9-3.el6_0.1 will be updated
---> Package apr-util.x86_64 0:1.5.2-1.mr.el6 will be an update
---> Package apr-util-ldap.x86_64 0:1.3.9-3.el6_0.1 will be updated
---> Package apr-util-ldap.x86_64 0:1.5.2-1.mr.el6 will be an update
---> Package kloxomr.noarch 0:6.5.0.f-2014011001.mr will be updated
---> Package kloxomr.noarch 0:6.5.0.f-2014013001.mr will be an update
---> Package libxml2.i686 0:2.7.6-14.el6 will be updated
---> Package libxml2.x86_64 0:2.7.6-14.el6 will be updated
---> Package libxml2.i686 0:2.9.1-1.mr.el6 will be an update
---> Package libxml2.x86_64 0:2.9.1-1.mr.el6 will be an update
---> Package p11-kit.x86_64 0:0.18.5-2.el6 will be updated
---> Package p11-kit.x86_64 0:0.18.5-2.el6_5.2 will be an update
---> Package p11-kit-trust.x86_64 0:0.18.5-2.el6 will be updated
---> Package p11-kit-trust.x86_64 0:0.18.5-2.el6_5.2 will be an update
---> Package qmail-pop3d-toaster.x86_64 0:1.03-1.3.34.mr.el6 will be updated
---> Package qmail-pop3d-toaster.x86_64 0:1.03-1.3.35.mr.el6 will be an update
---> Package qmail-toaster.x86_64 0:1.03-1.3.34.mr.el6 will be updated
---> Package qmail-toaster.x86_64 0:1.03-1.3.35.mr.el6 will be an update
---> Package tzdata.noarch 0:2013i-1.el6 will be updated
---> Package tzdata.noarch 0:2013i-2.el6 will be an update
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package       Arch   Version             Repository                       Size
================================================================================
Updating:
 apr           x86_64 1.4.8-1.mr.el6      mratwork-release-version-arch    85 k
 apr-util      x86_64 1.5.2-1.mr.el6      mratwork-release-version-arch    76 k
 apr-util-ldap x86_64 1.5.2-1.mr.el6      mratwork-release-version-arch   9.0 k
 kloxomr       noarch 6.5.0.f-2014013001.mr
                                          mratwork-release-neutral-noarch 6.2 M
 libxml2       i686   2.9.1-1.mr.el6      mratwork-release-version-arch   611 k
 libxml2       x86_64 2.9.1-1.mr.el6      mratwork-release-version-arch   609 k
 p11-kit       x86_64 0.18.5-2.el6_5.2    updates                          94 k
 p11-kit-trust x86_64 0.18.5-2.el6_5.2    updates                          71 k
 qmail-pop3d-toaster
               x86_64 1.03-1.3.35.mr.el6  mratwork-release-version-arch    37 k
 qmail-toaster x86_64 1.03-1.3.35.mr.el6  mratwork-release-version-arch   691 k
 tzdata        noarch 2013i-2.el6         updates                         448 k

Transaction Summary
================================================================================
Upgrade      11 Package(s)

Total download size: 8.9 M
Is this ok [y/N]: y
Downloading Packages:
(1/11): apr-1.4.8-1.mr.el6.x86_64.rpm                    |  85 kB     00:00
(2/11): apr-util-1.5.2-1.mr.el6.x86_64.rpm               |  76 kB     00:00
(3/11): apr-util-ldap-1.5.2-1.mr.el6.x86_64.rpm          | 9.0 kB     00:00
(4/11): kloxomr-6.5.0.f-2014013001.mr.noarch.rpm         | 6.2 MB     00:00
(5/11): libxml2-2.9.1-1.mr.el6.i686.rpm                  | 611 kB     00:00
(6/11): libxml2-2.9.1-1.mr.el6.x86_64.rpm                | 609 kB     00:00
(7/11): p11-kit-0.18.5-2.el6_5.2.x86_64.rpm              |  94 kB     00:00
(8/11): p11-kit-trust-0.18.5-2.el6_5.2.x86_64.rpm        |  71 kB     00:00
(9/11): qmail-pop3d-toaster-1.03-1.3.35.mr.el6.x86_64.rp |  37 kB     00:00
(10/11): qmail-toaster-1.03-1.3.35.mr.el6.x86_64.rpm     | 691 kB     00:00
(11/11): tzdata-2013i-2.el6.noarch.rpm                   | 448 kB     00:00
--------------------------------------------------------------------------------
Total                                           2.7 MB/s | 8.9 MB     00:03
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Updating   : p11-kit-0.18.5-2.el6_5.2.x86_64                             1/22
  Updating   : qmail-toaster-1.03-1.3.35.mr.el6.x86_64                     2/22
 Adding qmailtoaster users and groups.
groupadd: group 'nofiles' already exists
groupadd: group 'qmail' already exists
 Creating queue/lock/trigger named pipe.
 Compiling badmimetypes.
 Compiling badloadertypes.
 Making tlsserverciphers.
 Linking tlsserverciphers to tlsclientciphers.
 Making dh_keys.
Generating RSA private key, 512 bit long modulus
............++++++++++++
....++++++++++++
e is 65537 (0x10001)
Generating DH parameters, 512 bit long safe prime, generator 2
This is going to take a long time
...................................++*++*++*++*++*++*
Generating DH parameters, 1024 bit long safe prime, generator 2
This is going to take a long time
............................................................................................+........................................+..........+.........................................................+.......................................................+................................................................................+................................................+.............+.......++*++*++*
  Updating   : apr-1.4.8-1.mr.el6.x86_64                                   3/22
  Updating   : apr-util-1.5.2-1.mr.el6.x86_64                              4/22
  Updating   : apr-util-ldap-1.5.2-1.mr.el6.x86_64                         5/22
  Updating   : qmail-pop3d-toaster-1.03-1.3.35.mr.el6.x86_64               6/22
  Updating   : p11-kit-trust-0.18.5-2.el6_5.2.x86_64                       7/22
  Updating   : libxml2-2.9.1-1.mr.el6.x86_64                               8/22
  Updating   : tzdata-2013i-2.el6.noarch                                   9/22
  Updating   : libxml2-2.9.1-1.mr.el6.i686                                10/22
  Updating   : kloxomr-6.5.0.f-2014013001.mr.noarch                       11/22

 _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
 _/                                                                          _/
 _/  ..:: Kloxo-MR Web Panel ::..                                            _/
 _/                                                                          _/
 _/  Attention:                                                              _/
 _/                                                                          _/
 _/  Run 'sh /script/cleanup' for to make sure running well                  _/
 _/  or 'sh /script/cleanup-simple' (cleanup without fix services configs)   _/
 _/                                                                          _/
 _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

  Cleanup    : p11-kit-trust-0.18.5-2.el6.x86_64                          12/22
  Cleanup    : apr-util-ldap-1.3.9-3.el6_0.1.x86_64                       13/22
  Cleanup    : apr-util-1.3.9-3.el6_0.1.x86_64                            14/22
  Cleanup    : qmail-pop3d-toaster-1.03-1.3.34.mr.el6.x86_64              15/22
  Cleanup    : libxml2-2.7.6-14.el6                                       16/22
  Cleanup    : kloxomr-6.5.0.f-2014011001.mr.noarch                       17/22
  Cleanup    : tzdata-2013i-1.el6.noarch                                  18/22
  Cleanup    : qmail-toaster-1.03-1.3.34.mr.el6.x86_64                    19/22
  Cleanup    : apr-1.3.9-5.el6_2.x86_64                                   20/22
  Cleanup    : p11-kit-0.18.5-2.el6.x86_64                                21/22
  Cleanup    : libxml2-2.7.6-14.el6                                       22/22
  Verifying  : apr-util-1.5.2-1.mr.el6.x86_64                              1/22
  Verifying  : qmail-pop3d-toaster-1.03-1.3.35.mr.el6.x86_64               2/22
  Verifying  : tzdata-2013i-2.el6.noarch                                   3/22
  Verifying  : libxml2-2.9.1-1.mr.el6.x86_64                               4/22
  Verifying  : apr-1.4.8-1.mr.el6.x86_64                                   5/22
  Verifying  : apr-util-ldap-1.5.2-1.mr.el6.x86_64                         6/22
  Verifying  : kloxomr-6.5.0.f-2014013001.mr.noarch                        7/22
  Verifying  : libxml2-2.9.1-1.mr.el6.i686                                 8/22
  Verifying  : qmail-toaster-1.03-1.3.35.mr.el6.x86_64                     9/22
  Verifying  : p11-kit-0.18.5-2.el6_5.2.x86_64                            10/22
  Verifying  : p11-kit-trust-0.18.5-2.el6_5.2.x86_64                      11/22
  Verifying  : apr-util-ldap-1.3.9-3.el6_0.1.x86_64                       12/22
  Verifying  : p11-kit-trust-0.18.5-2.el6.x86_64                          13/22
  Verifying  : kloxomr-6.5.0.f-2014011001.mr.noarch                       14/22
  Verifying  : apr-util-1.3.9-3.el6_0.1.x86_64                            15/22
  Verifying  : tzdata-2013i-1.el6.noarch                                  16/22
  Verifying  : p11-kit-0.18.5-2.el6.x86_64                                17/22
  Verifying  : apr-1.3.9-5.el6_2.x86_64                                   18/22
  Verifying  : libxml2-2.7.6-14.el6.x86_64                                19/22
  Verifying  : qmail-toaster-1.03-1.3.34.mr.el6.x86_64                    20/22
  Verifying  : libxml2-2.7.6-14.el6.i686                                  21/22
  Verifying  : qmail-pop3d-toaster-1.03-1.3.34.mr.el6.x86_64              22/22

Updated:
  apr.x86_64 0:1.4.8-1.mr.el6
  apr-util.x86_64 0:1.5.2-1.mr.el6
  apr-util-ldap.x86_64 0:1.5.2-1.mr.el6
  kloxomr.noarch 0:6.5.0.f-2014013001.mr
  libxml2.i686 0:2.9.1-1.mr.el6
  libxml2.x86_64 0:2.9.1-1.mr.el6
  p11-kit.x86_64 0:0.18.5-2.el6_5.2
  p11-kit-trust.x86_64 0:0.18.5-2.el6_5.2
  qmail-pop3d-toaster.x86_64 0:1.03-1.3.35.mr.el6
  qmail-toaster.x86_64 0:1.03-1.3.35.mr.el6
  tzdata.noarch 0:2013i-2.el6

Complete!

Pages: 1 2 [3] 4 5

MRatWork Affiliates:    BIGRAF(R) Inc.    House of LMAR    EFARgrafix
Click Here

Page created in 0.148 seconds with 22 queries.

web stats analysis