Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2021-10-23, 23:01:26

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - henry

Pages: [1] 2
1
Quote
Error 404 - Not Found

The requested page could not be found but may be available again in the future

The fresh installation of kloxomr7 comes with this error?
OS Tested:
CentOS 6 32-bit & 64-bit

Quote
Try change dns to 'nsd' in 'switch programs' and then run 'sh /script/restart-dns -y sh /script/restart-dns -y' (in ssh) to make sure.

There something wrong with bind in Kloxo-MR 7 and still investigate.

Also better try hiawatha-proxy or nginx-proxy and php-fpm_event as php-fpm (click 'update' in this portion).

If you found like this issue, try change web server to other (let say nginx-proxy mean nginx+apache; so change to lighttpd) and then change back to previous (let say nginx-proxy). The same ways to php-type where change to mod_php_ruid2 and then change back to php-fpm_event.

To make sure, try 'sh /script/fix-skeleton; sh /script/fix-chownchmod; sh /script/fixweb; sh /script/restart-web -y'. If found error in restart, try reboot.

For Kloxo-MR 7.0, better use latest upload. So, 'yum clean all; yum update -y; sh /script/cleanup' is importance step.

Done everything above from many threads you replied, no change.
Most probably "bind" problem?

Current info:
Quote
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016071402
   - Web: hiawatha-10.3.0-f.1.mr.el6.i686
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.8 (Final) i686
   - Hostname: promaster.articlestrading.com
C. Services:
   1. MySQL: MariaDB-server-10.0.26-1.el6.i686
   2. PHP:
      - Installed:
        - Branch: php54-cli-5.4.45-1.ius.el6.i686
      - Used: --PHP Branch--
      - Multiple: disable
   3. Web Used: hiawathaproxy
     - Hiawatha: hiawatha-10.3.0-f.1.mr.el6.i686
     - Lighttpd: lighttpd-1.4.39-3.el6.i686
     - Nginx: nginx-1.11.2-1.el6.ngx.i386
     - Apache: httpd-2.2.31-1.mr.el6.i386
       - PHP Type: php-fpm_event
       - Secondary PHP: off
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: nsd
     - Bind: --uninstalled--
     - DJBDns: --uninstalled--
     - NSD: nsd-4.1.10-1.mr.el6.i686
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.i386
      - pop3/imap4: package none-toaster is not installed
      - smtp: package none-toaster is not installed
      - spam: bogofilter-1.2.4-1.el6.i686
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        245        266         30          0        104
   -/+ buffers/cache:        140        371
   Swap:          256          0        256
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  1.9G   49G   4% /


*** Process Time: 00:00:00:14.14504 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)

Kindly advice



2
I tried to restore backupbuddy file into a domain but failed. It said contact the hosting for a proper PHP configuring.

I read the previous thread here.

Subject: Problem With PHP

Code: [Select]
http://forum.mratwork.com/kloxo-mr-technical-helps/problem-with-php/
I followed the solution to change the PHP type to suphp and yes it worked.

However, I didn't proceed to restore the file as Mr.Mustafa mentioned better to use php-fpm.

Mr.Mustafa said " At this moment, php-fpm_event is the best choice for most websites because faster and secure. Nginx-proxy (nginx in front and apache in backend) as optimize choice (if possible, choose nginx but remember .httaccess not work)."

Then, I was trying to open a thread to put the info with sh /script/sysinfo.

However, I was too fast to paste a wrong command using the following execution.

sh /script/upcp

And my current info:

Code: [Select]
#  sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016030202
   - Web: hiawatha-10.1.0-f.6.mr.el6.x86_64
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) x86_64
   - Hostname: unknown.lowcostebuilder.com
C. Services:
   1. MySQL: MariaDB-server-10.0.24-1.el6.x86_64
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.x86_64
      - Used: --Use PHP Branch--
   3. Web Used: apache
     - Hiawatha: --unused--
     - Lighttpd: --uninstalled--
     - Nginx: --uninstalled--
     - Httpd: httpd-2.2.31-1.mr.el6.x86_64
       - PHP Type: php-fpm_event
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.7-1.mr.el6.x86_64
     - DJBDns: --uninstalled--
     - NSD: --uninstalled--
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.18.mr.el6.x86_64
      - spam: bogofilter
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        431         80          3          0        256
   -/+ buffers/cache:        175        336
   Swap:          256        110        145
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  2.1G   48G   5% /

Note: I was running all this with a new VPS server and trying to install the first domain. So, I din bother if wrong because I can just reinstall at will.

Thank you for attention
Sharing is caring!

( Forum has many interesting ads, you know what to do, get those ads that are interested to you. Cheers!)

3
Kloxo-MR Technical Helps / System Monitor On Domain
« on: 2016-03-26, 01:22:32 »
I setup a new server 8 hours ago.
Problem: I received around 99 email till now.
>>
Host: server2.domain.com
Date: Mar-25 04:11
Port: 25
Action: sh /script/restart-qmail --force >/dev/null 2>&1

Host: server2.domain.com
Date: Mar-25 04:11
Port: 80
Action: sh /script/restart-web --force >/dev/null 2>&1

sh /script/sysinfo
Code: [Select]
[root@server2 ~]# sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016030202
   - Web: hiawatha-10.1.0-f.6.mr.el6.x86_64
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) x86_64
   - Hostname: lowcost.lowcostebuilder.com
C. Services:
   1. MySQL: MariaDB-server-10.0.24-1.el6.x86_64
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.x86_64
      - Used: --Use PHP Branch--
   3. Web Used: apache
     - Hiawatha: --unused--
     - Lighttpd: --uninstalled--
     - Nginx: --uninstalled--
     - Httpd: httpd-2.2.31-1.mr.el6.x86_64
       - PHP Type: php-fpm_event
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.7-1.mr.el6.x86_64
     - DJBDns: --uninstalled--
     - NSD: --uninstalled--
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.18.mr.el6.x86_64
      - spam: bogofilter
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        207        304          2          0         42
   -/+ buffers/cache:        164        347
   Swap:          256          0        256
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  1.9G   49G   4% /


*** Process Time: 00:00:00:01.1429 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)

How to troubleshoot this?

4
Follow your instructions here at:

Code: [Select]
https://forum.mratwork.com/indonesia-users/(ask)-kloxo-mr-7-the-domain-is-pointing-to-the-wrong-kloxo-server/10/?wap2
'yum reinstall httpd-* mod_* -y; chkconfig httpd on; sh /script/cleanup'.

The problem remains same.

I have this problem after the recent update.

Quote
[root@server2 ~]# sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016021202
   - Web: hiawatha-10.1.0-f.6.mr.el6.i686
   - PHP: php54s-5.4.45-1.ius.el6 (cgi mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) i686
   - Hostname: server2.lowcostebuilder.com
C. Services:
   1. MySQL: MariaDB-server-10.0.23-1.el6.i686
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.i686
      - Used: --Use PHP Branch--
   3. Httpd: httpd-2.2.31-1.mr.el6.i386
      - PHP Type: php-fpm_event
   4. Lighttpd: --uninstalled--
   5. Hiawatha: --unused--
   6. Nginx: --uninstalled--
   7. Cache: --uninstalled--
   8. Dns: bind-9.9.7-1.mr.el6.i386
   9. Qmail: qmail-toaster-1.03-1.3.55.mr.el6.i386
      - with: courier-imap-toaster-4.1.2-1.3.18.mr.el6.i386
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:          1024        324        699          3          0        118
   -/+ buffers/cache:        206        817
   Swap:            0          0          0
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       40G  4.2G   36G  11% /


*** Process Time: 00:00:00:03.3474 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)


5
Re: Failed to install a script.

I was trying to install a script into my domain folder.
I input DB name, username, and password correctly.

After I clicked to install, my screen came out like this.

Quote
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'TYPE=MyISAM COMMENT='This is for login purpose.....'' at line 13

What did it mean?

6
I followed your instruction here:

Code: [Select]
http://forum.mratwork.com/kloxo-mr-tips-and-tricks/(tip)-how-to-setup-qmail-on-kloxo-mr/
Version:  Kloxo-MR: 6.5.0.f-2015010801

# fix mail issue
sh /script/fixmail-all

# better stop and start instead restart
qmailctl stop
qmailctl start

NOTE:
- Reinstall Qmail-toaster
Code: [Select]
# uninstall toaster
yum remove *-toaster

# remove bin and config
rm -rf /var/qmail/

# install again (including clamav and spamd) and also other applications as dependencies
yum install *-toaster webalizer cronie cronie-anacron crontabs

# run fix mail config (qmail-toaster config and webmail)
sh /script/fixmail-all

# restart (using stop and start better for this situation rather than restart)
# to make stopped and may appear error message
qmailctl stop
# start
qmailctl start

When come to this part:
Quote
[root@server ~]# qmailctl stop
Stopping qmail-toaster: svscan qmailsvc: warning: unable to control /var/qmail/s                                             upervise/authlib: file does not exist
svc: warning: unable to control /var/qmail/supervise/clamd: file does not exist
svc: warning: unable to control /var/qmail/supervise/imap4: file does not exist
svc: warning: unable to control /var/qmail/supervise/imap4-ssl: file does not ex                                             ist
svc: warning: unable to control /var/qmail/supervise/pop3: file does not exist
svc: warning: unable to control /var/qmail/supervise/pop3-ssl: file does not exi                                             st
svc: warning: unable to control /var/qmail/supervise/send: file does not exist
svc: warning: unable to control /var/qmail/supervise/smtp: file does not exist
svc: warning: unable to control /var/qmail/supervise/smtp-ssl: file does not exi                                             st
svc: warning: unable to control /var/qmail/supervise/spamd: file does not exist
svc: warning: unable to control /var/qmail/supervise/submission: file does not e                                             xist
 loggingsvc: warning: unable to control /var/qmail/supervise/authlib/log: file d                                             oes not exist
svc: warning: unable to control /var/qmail/supervise/clamd/log: file does not ex                                             ist
svc: warning: unable to control /var/qmail/supervise/imap4-ssl/log: file does no                                             t exist
svc: warning: unable to control /var/qmail/supervise/imap4/log: file does not ex                                             ist
svc: warning: unable to control /var/qmail/supervise/pop3-ssl/log: file does not                                              exist
svc: warning: unable to control /var/qmail/supervise/pop3/log: file does not exi                                             st
svc: warning: unable to control /var/qmail/supervise/send/log: file does not exi                                             st
svc: warning: unable to control /var/qmail/supervise/smtp-ssl/log: file does not                                              exist
svc: warning: unable to control /var/qmail/supervise/smtp/log: file does not exi                                             st
svc: warning: unable to control /var/qmail/supervise/spamd/log: file does not ex                                             ist
svc: warning: unable to control /var/qmail/supervise/submission/log: file does n                                             ot exist

Try to fix:
[root@server ~]# sh /script/cleanup
Quote
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exist
supervise: fatal: unable to start clamd/run: file does not exist
supervise: fatal: unable to start log/run: file does not exis

Please guide

7
My website not loading and my web page shown "No Data Received"?

http://prntscr.com/62g5rh

My Info:
Quote
A. Kloxo-MR: 6.5.0.f-2015010801

B. OS: CentOS release 6.6 (Final) i686

C. Apps:
   1. MySQL: mysql55-5.5.41-2.ius.el6.i686
   2. PHP: php53u-5.3.29-1.ius.el6.i686
   3. Httpd: httpd-2.2.29-1.mr.el6.i386
   4. Lighttpd: --uninstalled--
   5. Nginx: --uninstalled--
   6. Qmail: qmail-toaster-1.03-1.3.46.mr.el6.i386
      - with: courier-imap-toaster-4.1.2-1.3.18.mr.el6.i386
   7. Dns: bind-9.9.5-1.el6.i686

D. Php-type (for Httpd/proxy): mod_php_ruid2

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        169        342          4          0         44
   -/+ buffers/cache:        125        386
   Swap:          256          0        256

I check with VPS provider - no problem from them.

What should I do now?

8
I have downloaded around 5.5GB files from Old VPS server.
I am using Filezilla FTP.
I have a question for this. And that of my question is, where do I upload the file to via FTP?

Because on KloxoMr backup home menu, it is impossible for uploading big file through "upload" menu.
The only way is upload via FTP imo.

Therefore, I need to know the exact location so that when I clicked on "Backup from file" directory, the uploaded file will be there before I can "Start restore process"

Is this possible?

9
Code: [Select]
# df -h
Quote

Filesystem            Size  Used Avail Use% Mounted on
/dev/simfs            100G   10G   91G  10% /
none                  1.0G  8.0K  1.0G   1% /dev

Code: [Select]
# sh /script/restart-all
Quote
Stopping mysqld:                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
Stopping named: .                                          [  OK  ]
Starting named:                                            [  OK  ]
Stopping httpd:                                            [FAILED]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 198.23.242.143 for ServerName
                                                           [  OK  ]
touch: cannot touch `/var/lock/subsys/httpd': Disk quota exceeded
Stopping qmail-toaster: svscan qmailsupervise: warning: unable to open authlib/supervise/status.new: disk quota exceeded
supervise: warning: unable to open authlib/supervise/status.new: disk quota exceeded
supervise: warning: unable to open authlib/supervise/status.new: disk quota exceeded
supervise: warning: unable to open authlib/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open send/supervise/status.new: disk quota exceeded
supervise: warning: unable to open send/supervise/status.new: disk quota exceeded
supervise: warning: unable to open send/supervise/status.new: disk quota exceeded
supervise: warning: unable to open send/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open submission/supervise/status.new: disk quota exceeded
supervise: warning: unable to open submission/supervise/status.new: disk quota exceeded
supervise: warning: unable to open submission/supervise/status.new: disk quota exceeded
supervise: warning: unable to open submission/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
 loggingsupervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
.
qmail-send: no process killed
Starting qmail-toaster: svscan.
Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
supervise: warning: unable to open send/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open authlib/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open smtp-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open submission/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3-ssl/supervise/status.new: disk quota exceeded
supervise: warning: unable to open pop3/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open log/supervise/status.new: disk quota exceeded
supervise: warning: unable to open imap4-ssl/supervise/status.new: disk quota exceeded

Googling, unable to find one solution.
Kindly advice

10
GNU/Linux Helps / Backup And Restore KloxoMr Through SSH
« on: 2014-02-13, 11:58:51 »
1.Backup.
I have tried the "backup home", I felt like it didn't fully backup all my files in the old VPS server.

2.Restore.
Unable to upload big file that is bigger than 1GB through KloxoMr menu.
My trial new VPS spec for this is 2GB Ram / 4 CPU.

Every time, in order to be able to login KloxoMr panel. I have to login into SSH and execute:

Code: [Select]
sh /script/cleanup
sh /script/fix-all
sh /script/restart-all

Through Googling,
To take full backup vis SSH,
Code: [Select]
/script/backup --class=client --name=admin

To restore:
Code: [Select]
/script/restore --restore --accounts=all <backup-file-path>
To list the contents of a backup file.
Code: [Select]
/script/restore --list <backup-file-path>
To restore only certain domains/clients
Code: [Select]
cd /usr/local/lxlabs/kloxo/httpdocs/ lphp.exe ../bin/common/restore.php --restore --accounts=domain:domain.com,client:clientname <backup-file-path>
Source: old thread at Lx-Center.
Quote
http://forum.lxcenter.org/index.php?t=msg&th=11723&start=0&

Questions:
1. How do I download the backup file into hard drive?
2. How to upload into new server?
3. What commands to be executed?

Update: In the old VPS server.
Backup has been saved in /home/kloxo/client/admin/__backup/kloxo-scheduled

Please advice.
Thank you

11
I was using backupbuddy for backup all my WordPress blog.
However, during time of backup process, it prompted this message as below.
Quote
Your server does not support command line ZIP. Backups will be performed in compatibility mode.
Directory/file exclusion is not available in this mode so even existing backups will be backed up.
You may encounter stalled or significantly delayed backups

Then, shown a link
Quote
http://ithemes.com/codex/page/BackupBuddy:_Frequent_Support_Issues#Compatibility_Mode

The command line:
# yum install zip
# sudo apt-get install zip unzip

Is this alright to run on KloxoMr?

12
I shot the screen before and after extracted zip files.



Inside this backup zip file, 683,062 KB consisted of 2 domains.

The extracted zip files 661,949 KB which included 2 domains databases.

My question is. How do we restore one single domain inside that 683,062 KB?

Additional info: I built domains only on admin ( Not clients or reseller )

13
GNU/Linux Helps / How To Download SolusVM Backup File?
« on: 2014-02-06, 06:35:38 »
I requested the VPS provider to add the "quickbackup" into my SolusVM panel.



I created the backup successfully.
However, their support said that the backup files is resided in the panelbackup in VPS.
How do I go about download the backup files and where does the backup files actually located?

Is it going through by FTP, SSH or KloxoMr panel?
Please show us the easier way.

Thank you

14
I uploaded WordPress.org file into the public_html. I was trying to setup WordPress on the domain.

However, instead it always prompted with the following info


And then I typed domain/wp-admin, it shown " 404 not found "!

This is unlike Apache, usually when I typed domain/wp-admin, it will prompted me direct to create WP-config.php.
How come?

Hence, how to install WordPress in this case?



15
How do I enable exec on KloxoMR?


Pages: [1] 2

Top 10 Social Networking:    Facebook    Twitter    LinkedIn    Pinterest    Google Plus    Tumblr    Instagram    VK    Flickr    Vine

Page created in 0.046 seconds with 15 queries.

web stats analysis