Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2024-03-28, 12:22:38

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Joe

Pages: [1] 2 3 ... 10
1
Kloxo-MR Technical Helps / Mirrors Down
« on: 2017-04-18, 05:21:33 »
I'm getting these errors when running yum update....

Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
mratwork-epel/metalink                                   | 2.7 kB     00:00
Could not retrieve mirrorlist http://mirrors.iuscommunity.org/mirrorlist/?repo=i
us-centos5&arch=i386&protocol=http error was
[Errno 14] HTTP Error 404: Not Found
 * base: mirror.centos.org
 * extras: mirror.centos.org
 * mratwork-epel: mirror.math.princeton.edu
 * mratwork-ius-archive: ius.mirror.constant.com
 * mratwork-webtatic: us-east.repo.webtatic.com
 * rpmforge: repoforge.mirror.constant.com
 * updates: mirror.centos.org
http://mirror.centos.org/centos/5/os/i386/repodata/repomd.xml: [Errno 14] HTTP E
rror 404: Not Found
Trying other mirror.
http://mirrors.centos.webair.com/centos/5/os/i386/repodata/repomd.xml: [Errno 14
] HTTP Error 404: Not Found
Trying other mirror.
http://mirror.yellowfiber.net/centos/5/os/i386/repodata/repomd.xml: [Errno 14] H
TTP Error 404: Not Found
Trying other mirror.
http://repo1.ash.innoscale.net/centos/5/os/i386/repodata/repomd.xml: [Errno 14]
HTTP Error 404: Not Found
Trying other mirror.
http://www.gtlib.gatech.edu/pub/centos/5/os/i386/repodata/repomd.xml: [Errno 14]
 HTTP Error 404: Not Found
Trying other mirror.
http://mirror.cs.vt.edu/pub/CentOS/5/os/i386/repodata/repomd.xml: [Errno 14] HTT
P Error 404: Not Found
Trying other mirror.
http://mirror.5ninesolutions.com/centos/5/os/i386/repodata/repomd.xml: [Errno 14
] HTTP Error 404: Not Found
Trying other mirror.
http://mirror.cloud-bricks.net/centos/5/os/i386/repodata/repomd.xml: [Errno 14]
HTTP Error 404: Not Found
Trying other mirror.
http://centos.sonn.com/5/os/i386/repodata/repomd.xml: [Errno 14] HTTP Error 404:
 Not Found
Trying other mirror.
http://mirror.jax.hugeserver.com/centos/5/os/i386/repodata/repomd.xml: [Errno 14
] HTTP Error 404: Not Found
Trying other mirror.
http://ftp.osuosl.org/pub/centos/5/os/i386/repodata/repomd.xml: [Errno 14] HTTP
Error 404: Not Found
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Pl
ease verify its path and try again

2
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 15:08:28 »
I'll take your advice and upgrade to CentOs 6 soon.

3
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 14:54:05 »
Thanks so much. Everything is working great again.

4
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 11:44:17 »
Thanks PM sent.

5
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 11:17:49 »
I'm not sure of the previous version I was using but I've been running 7.x since I believe 2015.

6
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 10:26:01 »
I still don't understand and how to fix it? Did this change happen after updating to new version of Kloxo?

7
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 09:49:51 »

mysqld  Ver 10.0.30-MariaDB for Linux on i686 (MariaDB Server)
170314  4:51:18 [Note] mysqld (mysqld 10.0.30-MariaDB) starting as process 28129
 ...
total 16
-rw-r--r-- 1 root root  295 Mar  6 15:04 client.cnf
-rw-r--r-- 1 root root 3930 Apr 14  2015 my.cnf
-rw-r--r-- 1 root root  232 Mar  6 15:04 mysql-clients.cnf
-rw-r--r-- 1 root root  725 Mar  6 15:04 server.cnf
##  _______________________________________________________________________
## / Rackspace MySQL 5.5 Terse Configuration File                          \
## |                                                                       |
## | This is a base configuration file containing the most frequently used |
## | settings with reasonably defined default values for configuring and   |
## | tuning MySQL. Note that these settings can likely be further tuned in |
## | order to get optimum performance from MySQL based upon the database   |
## | configuration and hardware platform.                                  |
## |                                                                       |
## | While the settings provided are likely sufficient for most            |
## | situations, an exhaustive list of settings (with descriptions) can be |
## | found at:                                                             |
## | http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html   |
## |                                                                       |
## | Take care to only add/remove/change a setting if you are comfortable  |
## | doing so! For Rackspace customers, if you have any questions or       |
## | concerns, please contact the MySQL Database Services Team. Be aware   |
## | that some work performed by this team can involve additional billable |
## \ fees.                                                                 /
##  -----------------------------------------------------------------------
##         \   ^__^
##          \  (oo)\_______
##             (__)\       )\/\
##                 ||----w |
##                 ||     ||

[mysqld]
#OpenVZ AIO bug fix
innodb_use_native_aio=0

## General
datadir                         = /var/lib/mysql
tmpdir                          = /var/lib/mysqltmp
socket                          = /var/lib/mysql/mysql.sock
skip-name-resolve
sql-mode                        = NO_ENGINE_SUBSTITUTION
#event-scheduler                = 1

## Cache
thread-cache-size               = 16
table-open-cache                = 4096
table-definition-cache          = 2048
query-cache-size                = 32M
query-cache-limit               = 1M

## Per-thread Buffers
sort-buffer-size                = 1M
read-buffer-size                = 1M
read-rnd-buffer-size            = 1M
join-buffer-size                = 1M

## Temp Tables
tmp-table-size                  = 32M
max-heap-table-size             = 64M

## Networking
back-log                        = 100
#max-connections                = 200
max-connect-errors              = 10000
max-allowed-packet              = 16M
interactive-timeout             = 3600
wait-timeout                    = 600

### Storage Engines
#default-storage-engine         = InnoDB
innodb                          = FORCE

## MyISAM
key-buffer-size                 = 64M
myisam-sort-buffer-size         = 128M

## InnoDB
#innodb-buffer-pool-size        = 128M
#innodb-log-file-size           = 100M
#innodb-log-buffer-size         = 8M
#innodb-file-per-table          = 1
#innodb-open-files              = 300

## Replication
server-id                       = 1
#log-bin                        = /var/log/mysql/bin-log
#relay-log                      = /var/log/mysql/relay-log
relay-log-space-limit           = 16G
expire-logs-days                = 7
#read-only                      = 1
#sync-binlog                    = 1
#log-slave-updates              = 1
#binlog-format                  = STATEMENT
#auto-increment-offset          = 1
#auto-increment-increment       = 2

## Logging
#log-output                      = FILE
#slow-query-log                  = 1
#slow-query-log-file             = /var/log/mysql/slow-log
#log-slow-slave-statements
#long-query-time                 = 2

[mysqld_safe]
log-error                       = /var/log/mysqld.log
open-files-limit                = 65535

[mysql]
no-auto-rehash

8
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 09:18:49 »
How do I fix it? Happened after running yum update?

9
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 09:05:05 »
I also noticed this after running script cleanup:

- List for 'database' branch
- List for 'dns' branch
- List for 'ftp' branch
- List for 'hiawatha' branch
- List for 'httpd' branch
- List for 'imap' branch
- List for 'mysql' branch
- List for 'nginx' branch
- List for 'php' branch
- List for 'pop' branch
- List for 'smtp' branch
- List for 'spam' branch
- List for 'web' branch
- List for 'webcache' branch
Check for rpm packages
- autorespond-toaster package already installed
- courier-imap-toaster package already installed
- dovecot-toaster package already installed
- daemontools-toaster package already installed
- ezmlm-toaster package already installed
- libdomainkeys-toaster package already installed
- libsrs2-toaster package already installed
- maildrop-toaster package already installed
- Install for qmail-pop3d-toaster package
- qmail-toaster package already installed
- ripmime package already installed
- ucspi-tcp-toaster package already installed
- vpopmail-toaster package already installed
- fetchmail package already installed
- bogofilter package already installed
- spamdyke package already installed
- spamdyke-utils package already installed
- pure-ftpd package already installed
- webalizer package already installed
- dos2unix package already installed
- rrdtool package already installed
- xinetd package already installed
- lxjailshell package already installed
Initialize /script/ dir
- Initialize processes
Install jailshell to system
- Already exists
Set /home permission to 0755
- Set process
- chown apache:apache FOR /home/kloxo/httpd/ AND INSIDE
- chmod 644 FOR *.php* INSIDE /home/kloxo/httpd/
- chmod 755 FOR *.pl/cgi/py/rb INSIDE /home/kloxo/httpd/
- chmod 755 FOR /home/kloxo/httpd/ AND INSIDE
- chmod 771 FOR /home/kloxo/httpd/
Fix suexec
- Fix process
Install/Fix Services/Permissions/Configfiles
- Set permissions for /usr/bin/php-cgi
- Set permissions for closeinput binary
- Set permissions for phpsuexec.sh script
- Set permissions for /var/lib/php/session/ dir
- Set permissions for /var/bogofilter/ dir
- Kill sisinfoc system process
Execute/remove/initialize/install script
- Execute vpopmail.sh
- Initialize /home/kloxo/httpd/script dir
- Remove /home/kloxo/httpd/script dir
- Set ownership apache:apache for /home/kloxo/httpd/script dir
- Install phpinfo.php into /home/kloxo/httpd/script dir
Remove cache dir
- Remove process
Initialize awstats dirdata
- Initialize process
Update Kloxo database
- Update process
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib
/mysql/mysql.sock' (2 "No such file or directory")
Remove old lxlabs ssh key
- Remove process
- Preparing MySQL/MariaDB service
- MariaDB activated
- Updating Main services
Updating All packages - WAIT to process...
- No update found/not installed
Remove /home/httpd/*/httpdocs
- Remove process
Add 'hostname' information to '/etc/hosts'
- Add ip, short and full name of 'hostname'
Initialize some skeletons
- Php files for default web page
- Skeleton for default web page
- robots.txt for default web page
- Php files for disable web page
- Skeleton for disable web page
- robots.txt for disable web page
- Php files for webmail web page
- Skeleton for webmail web page
- robots.txt for webmail web page
- Php files for cp web page
- Skeleton for cp web page
- robots.txt for cp web page
- Skeleton for error web page
- robots.txt for error web page
- chown apache:apache FOR /home/kloxo/httpd/ AND INSIDE
- chmod 644 FOR *.php* INSIDE /home/kloxo/httpd/
- chmod 755 FOR *.pl/cgi/py/rb INSIDE /home/kloxo/httpd/
- chmod 755 FOR /home/kloxo/httpd/ AND INSIDE
- chmod 771 FOR /home/kloxo/httpd/
- Php files for login web page
- Skeleton for panel login web page
- Skeleton for panel root web page
- Files for error web pages
- Skeleton for error web pages
- Copy error web pages to '/home/kloxo/httpd/error'
- No exists user-skeleton
- No exists user-logo
Initialize phpMyAdmin configfile
- phpMyAdmin: Set db password in configfile
Initialize OS admin account description
- Initialize process
Copy all contents from ../file/bind
- Copy to /opt/configs/bind
- Copy etc/named.conf to /etc/named.conf
Copy all contents from ../file/djbdns
- Copy to /opt/configs/djbdns
Copy all contents from ../file/mydns
- Copy to /opt/configs/mydns
- Copy etc/conf/mydns.conf to /etc/mydns/mydns.conf
Prepare MyDns database
- Fix MySQL commands in import files
- Generate password
- Add Password to configuration file
Copy all contents from ../file/nsd
- Copy to /opt/configs/nsd
- Copy etc/conf/nsd4.conf to /etc/nsd/nsd.conf
Copy all contents from ../file/pdns
- Copy to /opt/configs/pdns
- Copy etc/conf/pdns.conf to /etc/pdns/pdns.conf
Prepare PowerDNS database
- Install MySQL and Geo Backend
- Fix MySQL commands in import files
- Generate password
- Add Password to configuration file
Copy all contents from ../file/yadifa
- Copy to /opt/configs/yadifa
- Copy etc/yadifad.conf to /etc/yadifad.conf
Initialize apache config
- /etc/httpd/conf.d dir already exists
- /opt/configs/apache/tpl dir already exists
- /opt/configs/apache/conf dir already exists
- /opt/configs/apache/etc dir already exists
- /opt/configs/apache/etc/conf dir already exists
- /opt/configs/apache/etc/conf.d dir already exists
Copy all contents from ../file/apache
- Copy to /opt/configs/apache
- Copy etc/conf/httpd.conf to /etc/httpd/conf/httpd.conf
- chown root:root FOR /opt/configs/apache/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/apache/
Initialize lighttpd config
- /etc/lighttpd/conf.d dir already exists
- /opt/configs/lighttpd/tpl dir already exists
- /opt/configs/lighttpd/conf dir already exists
- /opt/configs/lighttpd/etc dir already exists
- /opt/configs/lighttpd/etc/conf dir already exists
- /opt/configs/lighttpd/etc/conf.d dir already exists
Copy all contents from ../file/lighttpd
- Copy to /opt/configs/lighttpd
- Copy etc/conf/lighttpd.conf to /etc/lighttpd/lighttpd.conf
- chown root:root FOR /opt/configs/lighttpd/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/lighttpd/
Initialize nginx config
- /etc/nginx/conf.d dir already exists
- /opt/configs/nginx/tpl dir already exists
- /opt/configs/nginx/conf dir already exists
- /opt/configs/nginx/etc dir already exists
- /opt/configs/nginx/etc/conf dir already exists
- /opt/configs/nginx/etc/conf.d dir already exists
Copy all contents from ../file/nginx
- Copy to /opt/configs/nginx
- Copy etc/conf/nginx.conf to /etc/nginx/nginx.conf
- chown root:root FOR /opt/configs/nginx/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/nginx/
Initialize hiawatha config
- /etc/hiawatha/conf.d dir already exists
- /opt/configs/hiawatha/tpl dir already exists
- /opt/configs/hiawatha/conf dir already exists
- /opt/configs/hiawatha/etc dir already exists
- /opt/configs/hiawatha/etc/conf dir already exists
- /opt/configs/hiawatha/etc/conf.d dir already exists
Copy all contents from ../file/hiawatha
- Copy to /opt/configs/hiawatha
- Copy etc/conf/hiawatha_standard.conf to /etc/hiawatha/hiawatha.conf
- chown root:root FOR /opt/configs/hiawatha/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/hiawatha/
Copy all contents from ../file/varnish
- Copy to /opt/configs/varnish
Copy all contents from ../file/squid
- Copy to /opt/configs/squid
Copy all contents from ../file/trafficserver
- Copy to /opt/configs/trafficserver
Update All Php (branch and multiple)
- Update process
Initialize PureFtp service
- Initialize process
- Restart pure-ftpd service
Initialize logrotates
- Initialize process
Install All Web servers
- No process for 'httpd'
- No process for 'lighttpd' again
- No process for 'nginx' again
- No process for 'hiawatha' again
- Inactivate 'httpd'
- Inactivate 'lighttpd'
- Inactivate 'nginx'
- Inactivate 'hiawatha'
Activate Web servers
- Activate 'httpd' as Web server
Copy awstats_index.php to /home/kloxo/httpd/awstats/wwwroot/cgi-bin
Install Webmail chooser
- Install process
Initialize Mail service
- Initialize process
Set All SSL Portions
- Copy 'openssl' config Files
Copy all contents from ../file/openssl
- Copy to /opt/configs/openssl
- Copy 'acme.sh' config Files
Copy all contents from ../file/acme.sh
- Copy to /opt/configs/acme.sh
- Copy 'startapi.sh' config Files
Copy all contents from ../file/startapi.sh
- Copy to /opt/configs/startapi.sh
- Install acme.sh
- Install startapi.sh
- Fix SSL path
- Copy 'httpry' config Files
Copy all contents from ../file/httpry
- Copy to /opt/configs/httpry
- Install httpry
No Match for argument: httpry
- Fix 'Cron Backup' Files
Set Watchdog defaults
- Set process
Fix services
- Fix dns services
- Fix webcache services
- Fix ssl services
- Fix php services
- Fix web services
- Fix mail-all services
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib
/mysql/mysql.sock' (2 "No such file or directory")
- Fix ftp-all services
- Fix skeleton services
- Fixing Hiawatha service
*** Executing Update (cleanup) - END ***

*** Restart services - BEGIN ***

 ERROR! MySQL server PID file could not be found!
Starting MySQL.170314 04:04:38 mysqld_safe Logging to '/var/log/mysqld.log'.
170314 04:04:38 mysqld_safe Starting mysqld daemon with databases from /var/lib/
mysql
/usr/bin/mysqld_safe_helper: Can't create/write to file '/var/log/mysqld.log' (E
rrcode: 13 "Permission denied")
 ERROR!
-------------------------------------------------------------------

Stopping nsd:                                              [  OK  ]
Starting nsd:                                              [  OK  ]
-------------------------------------------------------------------

Stopping php-fpm (PHP Used):                               [  OK  ]
Starting php-fpm (PHP Used):                               [  OK  ]
-------------------------------------------------------------------

Stopping httpd:                                            [  OK  ]
Starting httpd:                                            [  OK  ]
-------------------------------------------------------------------


*** Process for QMAIL service ***
Stopping qmail-toaster: svscan qmail logging.
qmail-send: no process killed
Starting qmail-toaster: svscan.
-------------------------------------------------------------------

- For help, type '/script/restart-mail [--help|-h]'
-------------------------------------------------------------------

Stopping pure-ftpd:                                        [  OK  ]
Starting pure-ftpd:                                        [  OK  ]
-------------------------------------------------------------------
*** Restart services - END ***


*** Process Time: 00:00:05:32.332541 (dd:hh:mm:ss:xxxxxx) ***


REMARK:
 - run 'sh /script/fixdnsaddstatsrecord' to make sure dns records including
   'A record' for 'stats'
 - 'http://domain.com/stats' will be redirect to 'http://stats.domain.com'

10
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 08:53:00 »
No longer gives repo error but still "no packages marked for update".

11
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 08:41:48 »
Tried all commands and still "no packages marked for updates". Same repo error above.

12
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 08:22:25 »
Repo down? Is this the problem?

Determining fastest mirrors
mratwork-epel/metalink                                   | 9.3 kB     00:00
 * base: mirror.fileplanet.com
 * extras: mirror.fileplanet.com
 * mratwork-epel: fedora-epel.mirrors.tds.net
 * mratwork-ius-archive: ius.mirror.constant.com
 * mratwork-release-neutral-noarch: rpms.mustafa.id
 * mratwork-release-version-arch: rpms.mustafa.id
 * mratwork-srpms: ius.mirror.constant.com
 * mratwork-testing-neutral-noarch: rpms.mustafa.id
 * mratwork-webtatic: repo.webtatic.com
 * rpmforge: repoforge.mirror.constant.com
 * updates: mirror.fileplanet.com
base                                                     | 1.1 kB     00:00
base/primary                                             | 996 kB     00:00
base                                                                  2791/2791
extras                                                   | 2.1 kB     00:00
extras/primary_db                                        | 164 kB     00:00
mratwork-epel                                            | 3.6 kB     00:00
mratwork-epel/primary_db                                 | 2.4 MB     00:00
mratwork-google-mod-pagespeed                            |  951 B     00:00
mratwork-google-mod-pagespeed/primary                    | 1.9 kB     00:00
mratwork-google-mod-pagespeed                                               6/6
mratwork-ius-archive                                     | 2.3 kB     00:00
mratwork-ius-archive/primary_db                          | 1.1 MB     00:00
mratwork-mariadb                                         | 1.2 kB     00:00
mratwork-mariadb/primary                                 | 6.0 kB     00:00
mratwork-mariadb                                                          14/14
mratwork-nginx                                           | 2.5 kB     00:00
mratwork-nginx/primary_db                                |  56 kB     00:00
mratwork-nginx-stable                                    | 2.5 kB     00:00
mratwork-nginx-stable/primary_db                         |  20 kB     00:00
mratwork-release-neutral-noarch                          | 1.3 kB     00:00
mratwork-release-neutral-noarch/primary                  | 118 kB     00:00
mratwork-release-neutral-noarch                                         411/411
http://rpms.mustafa.id/repo/mratwork/release/centos5/i386/%0D/repodata/repomd.xm
l: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
http://rpms.printographic.com/repo/mratwork/release/centos5/i386/%0D/repodata/re
pomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
mratwork-release-version-arch                            | 1.2 kB     00:00
mratwork-release-version-arch/primary                    | 100 kB     00:00
mratwork-release-version-arch                                           288/288
mratwork-srpms                                           | 2.3 kB     00:00
mratwork-srpms/primary_db                                |  41 kB     00:00
http://rpms.mustafa.id/repo/mratwork/testing/neutral/noarch/%0D/repodata/repomd.
xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
http://rpms.printographic.com/repo/mratwork/testing/neutral/noarch/%0D/repodata/
repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
mratwork-testing-neutral-noarch                          | 1.2 kB     00:00
mratwork-testing-neutral-noarch/primary                  | 6.1 kB     00:00
mratwork-testing-neutral-noarch                                           30/30
mratwork-varnish-3.0                                     |  951 B     00:00
mratwork-varnish-3.0/primary                             |  12 kB     00:00
mratwork-varnish-3.0                                                      48/48
mratwork-webtatic                                        | 2.5 kB     00:00
mratwork-webtatic/primary_db                             |  48 kB     00:00
rpmforge                                                 | 1.9 kB     00:00
rpmforge/primary_db                                      | 7.3 MB     00:01
updates                                                  | 1.9 kB     00:00
updates/primary_db                                       | 903 kB     00:00
vz-base                                                  |  951 B     00:00
vz-base/primary                                          | 1.7 kB     00:00
vz-base                                                                     5/5
vz-updates                                               |  951 B     00:00
vz-updates/primary                                       | 1.0 kB     00:00
vz-updates                                                                  3/3
Excluding Packages in global exclude list
Finished
Excluding Packages from MRatWork - Extra Packages for EL 5 - arch
Finished
Excluding Packages from MRatWork - IUS Community Packages for EL 5 (archive) - a
rch
Finished
Excluding Packages from MRatWork - IUS Community Packages for EL 5 (stable) - ar
ch
Finished
Excluding Packages from MRatWork - Webtatic for CentOS 5 - i386
Finished
0 packages excluded due to repository protections
Setting up Update Process
No Packages marked for Update

13
Kloxo-MR Technical Helps / Re: Kloxo Broke After Yum Update
« on: 2017-03-14, 08:10:43 »
sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.c-2017031302
   - Web: hiawatha-10.5.0-f.2.mr.el5.i386
   - PHP: php54s-5.4.45-1.ius.el5 (fpm mode)
B. Plateform:
   - OS: CentOS release 5.11 (Final) i686
   - Hostname: mydomain.com
C. Services:
   1. MySQL: MariaDB-server-10.0.30-1.i386
   2. PHP:
      - Installed:
        - Branch: php54-cli-5.4.45-1.ius.centos5.i386
        - Multiple:
          * php52m-5.2.17-102.mr.el5
          * php54m-5.4.45-1.ius.el5
      - Used: --PHP Branch--
      - Multiple: disable
   3. Web Used: apache
     - Hiawatha: hiawatha-10.5.0-f.2.mr.el5.i386
     - Lighttpd: lighttpd-1.4.39-3.el5.i386
     - Nginx: nginx-1.11.10-1.el5.ngx.i386
     - Apache: httpd-2.2.31-1.mr.el5.i386
       - PHP Type: php-fpm_event (default)
       - Secondary PHP: off
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: --uninstalled--
     - DJBDns: --uninstalled--
     - NSD: nsd-4.1.10-1.mr.el5.i386
     - PowerDNS: pdns-3.4.9-1.mr.el5.i386
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el5.i386
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.20.mr.el5.i386
      - smtp: qmail-toaster-1.03-1.3.55.mr.el5.i386
      - spam: bogofilter-1.2.4-1.el5.i386
   7. Stats: awstats
D. Memory:
             total       used       free     shared    buffers     cached
Mem:           256        256          0          0          0         79
-/+ buffers/cache:        176         79
Swap:          256         37        218
E. Disk Space:
Filesystem            Size  Used Avail Use% Mounted on
/dev/simfs             30G  5.5G   25G  19% /


*** Process Time: 00:00:00:23.23673 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)

14
Kloxo-MR Technical Helps / Kloxo Broke After Yum Update
« on: 2017-03-14, 07:13:08 »
I'm unable to login to Kloxo after running yum update. I've tried using the command 'yum clean all; yum update; sh /script/cleanup'.

Kloxo Login page shows after trying to login:

It says "*** Token not match. No permit for remote login. Go back to login page ***

15
Forgot I had that featured enabled. Try now.

Pages: [1] 2 3 ... 10

Top 4 Global Search Engines:    Google    Bing    Baidu    Yahoo
Click Here

Page created in 0.069 seconds with 20 queries.

web stats analysis