Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2021-10-23, 23:33:56

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - henry

Pages: [1] 2 3 ... 9
1
Oh sorry, yes.
Thank you
My firefox shows error. But my chrome shows ok.


2
Quote
Error 404 - Not Found

The requested page could not be found but may be available again in the future

The fresh installation of kloxomr7 comes with this error?
OS Tested:
CentOS 6 32-bit & 64-bit

Quote
Try change dns to 'nsd' in 'switch programs' and then run 'sh /script/restart-dns -y sh /script/restart-dns -y' (in ssh) to make sure.

There something wrong with bind in Kloxo-MR 7 and still investigate.

Also better try hiawatha-proxy or nginx-proxy and php-fpm_event as php-fpm (click 'update' in this portion).

If you found like this issue, try change web server to other (let say nginx-proxy mean nginx+apache; so change to lighttpd) and then change back to previous (let say nginx-proxy). The same ways to php-type where change to mod_php_ruid2 and then change back to php-fpm_event.

To make sure, try 'sh /script/fix-skeleton; sh /script/fix-chownchmod; sh /script/fixweb; sh /script/restart-web -y'. If found error in restart, try reboot.

For Kloxo-MR 7.0, better use latest upload. So, 'yum clean all; yum update -y; sh /script/cleanup' is importance step.

Done everything above from many threads you replied, no change.
Most probably "bind" problem?

Current info:
Quote
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016071402
   - Web: hiawatha-10.3.0-f.1.mr.el6.i686
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.8 (Final) i686
   - Hostname: promaster.articlestrading.com
C. Services:
   1. MySQL: MariaDB-server-10.0.26-1.el6.i686
   2. PHP:
      - Installed:
        - Branch: php54-cli-5.4.45-1.ius.el6.i686
      - Used: --PHP Branch--
      - Multiple: disable
   3. Web Used: hiawathaproxy
     - Hiawatha: hiawatha-10.3.0-f.1.mr.el6.i686
     - Lighttpd: lighttpd-1.4.39-3.el6.i686
     - Nginx: nginx-1.11.2-1.el6.ngx.i386
     - Apache: httpd-2.2.31-1.mr.el6.i386
       - PHP Type: php-fpm_event
       - Secondary PHP: off
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: nsd
     - Bind: --uninstalled--
     - DJBDns: --uninstalled--
     - NSD: nsd-4.1.10-1.mr.el6.i686
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.i386
      - pop3/imap4: package none-toaster is not installed
      - smtp: package none-toaster is not installed
      - spam: bogofilter-1.2.4-1.el6.i686
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        245        266         30          0        104
   -/+ buffers/cache:        140        371
   Swap:          256          0        256
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  1.9G   49G   4% /


*** Process Time: 00:00:00:14.14504 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)

Kindly advice



3
I am very sure Mr.Mustafa.
I just finished re-installed and already installed 3 domains with no problem.

I din really know why but it solved the problem.

4
Need 1 domain for shared-IP and other IPs able to assign to certain domain.

But, I installed the exact same way in the old VPS hosting.
Old VPS hosting with more than 5 domains, no problem.

I actually suspect the OS when having an IP mapping.

I think I will reinstall the OS and kloxoMr again.
( Tomorrow will do it )

Update: My current OS template: Centos 6 X86

I will select template: Centos 6 X86 64

5
Found the same issue if select 'nginx' as web server?

Yes,even switch program to "nginx"

Tried this as well
If the "domain configure" to map IP Address, only one domain can be used.
How about other's domain?


6
Change to 'fcgid_event' and then change back to 'php-fpm_event' for 'php type' under 'webserver configure'.

Same thing...

7
Looks like, you have to configure IP address in your domain name registrar.
I am guessing only

8
I was trying to switch in a new VPS hosting because faster loading speed. But with the following problem now.



1) Done # sh /script/cleanup
Same problem...

2) Switch to Nginx
Same problem...

3) Switched back to Apache
Same problem...

4) 'yum reinstall httpd-* mod_* -y; chkconfig httpd on; sh /script/cleanup'.
Same problem...

5) # sh /script/sysinfo
Code: [Select]
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016032701
   - Web: hiawatha-10.1.0-f.6.mr.el6.i686
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) i686
   - Hostname: future.thenexttrillions.com
C. Services:
   1. MySQL: MariaDB-server-10.0.24-1.el6.i686
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.i686
      - Used: --Use PHP Branch--
   3. Web Used: apache
     - Hiawatha: --unused--
     - Lighttpd: --uninstalled--
     - Nginx: --uninstalled--
     - Httpd: httpd-2.2.31-1.mr.el6.i386
       - PHP Type: php-fpm_event
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.7-1.mr.el6.i386
     - DJBDns: --uninstalled--
     - NSD: --uninstalled--
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.i386
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.18.mr.el6.i386
      - spam: bogofilter
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:          1024        178        845          3          0         42
   -/+ buffers/cache:        135        888
   Swap:            0          0          0
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       30G  4.4G   26G  15% /

Why so?

9
Kloxo-MR Technical Helps / Re: System Monitor
« on: 2016-03-27, 04:40:00 »
Looks like same with my previous question.

Solution is here:
Code: [Select]
https://forum.mratwork.com/kloxo-mr-technical-helps/system-monitor-on-domain/

10
I tried to restore backupbuddy file into a domain but failed. It said contact the hosting for a proper PHP configuring.

I read the previous thread here.

Subject: Problem With PHP

Code: [Select]
http://forum.mratwork.com/kloxo-mr-technical-helps/problem-with-php/
I followed the solution to change the PHP type to suphp and yes it worked.

However, I didn't proceed to restore the file as Mr.Mustafa mentioned better to use php-fpm.

Mr.Mustafa said " At this moment, php-fpm_event is the best choice for most websites because faster and secure. Nginx-proxy (nginx in front and apache in backend) as optimize choice (if possible, choose nginx but remember .httaccess not work)."

Then, I was trying to open a thread to put the info with sh /script/sysinfo.

However, I was too fast to paste a wrong command using the following execution.

sh /script/upcp

And my current info:

Code: [Select]
#  sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016030202
   - Web: hiawatha-10.1.0-f.6.mr.el6.x86_64
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) x86_64
   - Hostname: unknown.lowcostebuilder.com
C. Services:
   1. MySQL: MariaDB-server-10.0.24-1.el6.x86_64
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.x86_64
      - Used: --Use PHP Branch--
   3. Web Used: apache
     - Hiawatha: --unused--
     - Lighttpd: --uninstalled--
     - Nginx: --uninstalled--
     - Httpd: httpd-2.2.31-1.mr.el6.x86_64
       - PHP Type: php-fpm_event
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.7-1.mr.el6.x86_64
     - DJBDns: --uninstalled--
     - NSD: --uninstalled--
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.18.mr.el6.x86_64
      - spam: bogofilter
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        431         80          3          0        256
   -/+ buffers/cache:        175        336
   Swap:          256        110        145
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  2.1G   48G   5% /

Note: I was running all this with a new VPS server and trying to install the first domain. So, I din bother if wrong because I can just reinstall at will.

Thank you for attention
Sharing is caring!

( Forum has many interesting ads, you know what to do, get those ads that are interested to you. Cheers!)

11
Kloxo-MR Technical Helps / Re: System Monitor On Domain
« on: 2016-03-26, 02:14:12 »
Thank you for the solution and prompt reply.
I followed the above instruction.
The email stopped and back to normal.

Usually, it will send to my email registered every 5 mins.
Now, it been over 20 mins

Tqvm

12
Kloxo-MR Technical Helps / System Monitor On Domain
« on: 2016-03-26, 01:22:32 »
I setup a new server 8 hours ago.
Problem: I received around 99 email till now.
>>
Host: server2.domain.com
Date: Mar-25 04:11
Port: 25
Action: sh /script/restart-qmail --force >/dev/null 2>&1

Host: server2.domain.com
Date: Mar-25 04:11
Port: 80
Action: sh /script/restart-web --force >/dev/null 2>&1

sh /script/sysinfo
Code: [Select]
[root@server2 ~]# sh /script/sysinfo
A. Control Panel:
   - Kloxo-MR: 7.0.0.b-2016030202
   - Web: hiawatha-10.1.0-f.6.mr.el6.x86_64
   - PHP: php54s-5.4.45-1.ius.el6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.7 (Final) x86_64
   - Hostname: lowcost.lowcostebuilder.com
C. Services:
   1. MySQL: MariaDB-server-10.0.24-1.el6.x86_64
   2. PHP:
      - Branch: php54-cli-5.4.45-1.ius.el6.x86_64
      - Used: --Use PHP Branch--
   3. Web Used: apache
     - Hiawatha: --unused--
     - Lighttpd: --uninstalled--
     - Nginx: --uninstalled--
     - Httpd: httpd-2.2.31-1.mr.el6.x86_64
       - PHP Type: php-fpm_event
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.7-1.mr.el6.x86_64
     - DJBDns: --uninstalled--
     - NSD: --uninstalled--
     - PowerDNS: --uninstalled--
     - Yadifa: --uninstalled--
   6. Mail: qmail-toaster-1.03-1.3.55.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.18.mr.el6.x86_64
      - spam: bogofilter
D. Memory:
                total       used       free     shared    buffers     cached
   Mem:           512        207        304          2          0         42
   -/+ buffers/cache:        164        347
   Swap:          256          0        256
E. Disk Space:
   Filesystem      Size  Used Avail Use% Mounted on
   /dev/simfs       50G  1.9G   49G   4% /


*** Process Time: 00:00:00:01.1429 (dd:hh:mm:ss:xxxxxx) ***

* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
        (importance after Kloxo-MR update)

How to troubleshoot this?

13
After playing around with KloxoMr panel, I found the solution to FTP setting.
Browse and find FTP configure,
Check Enable SSL/TLS

That's all.  :D 8)


14
Still cannot use FTP as usual.
Quote
[root@server3 ~]# sh /script/set-kloxo-php pfm

- For help, type '/script/set-kloxo-php --help'

Stopping kloxo-phpcgi:                                     [FAILED]
Starting kloxo-phpcgi ('php54s' in 'fpm' mode):            [  OK  ]
Stopping kloxo-hiawatha:                                   [  OK  ]
Starting kloxo-hiawatha:                                   [  OK  ]
-------------------------------------------------------------------

- For help, type '/script/restart [--help|-h]'

Password updated successfully, but failed to connect.





15
Followed the instruction.
However, I have to re-run commands like normal.
# yum update
# sh /script/cleanup
# sh /script/fixweb
# sh /script/restart-all
reboot

Only then okay.

That the strange thing is, I cannot login from FTP after updated password.
Additionally, I did try this for 2 servers.

How come?

Pages: [1] 2 3 ... 9

Top 4 Global Search Engines:    Google    Bing    Baidu    Yahoo
Click Here

Page created in 0.065 seconds with 17 queries.

web stats analysis