Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2024-03-29, 15:02:23

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - shaunrico

Pages: [1] 2
1
Kloxo-MR Technical Helps / Mysql naming prefix changed
« on: 2017-09-10, 05:39:39 »
Something suddenly changed in the naming of prefix in mysql databases.
For example in my kloxo installation, all my database prefix starts with cat_ but suddenly today mysql start randomizing the prefix. Is that normal? It never happened to me before.
Please see attached file.

PS: it's working fine but I am worried that my server has been compromised or something like that.

2
Kloxo-MR Technical Helps / Re: Clamd process high cpu usage
« on: 2017-09-06, 19:08:44 »
Rebooting didn't help. It was still using 100% of CPU. I had to uninstall/remove it completely.

3
Kloxo-MR Technical Helps / Clamd process high cpu usage
« on: 2017-09-05, 13:43:04 »
I am having a problem with clamd high usage of cpu. It's using 100% almost non stop.
I tried to google and did the following:

service clamd stop
chkconfig clamd off
chkconfig clamd --del

The problem is clamd is still there using 100%, even after reboot. I went to Mail Server Settings and disable Virus Scan. No help.
I can't get rid of it.

4
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-05, 08:04:46 »
OK, it worked but after switching to php71m, my server was really unstable. I was getting high load for no reason. Website was going down.
Had to switch back.

5
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 20:33:47 »
OK I did what you said.
But still not working, ioncube not loaded.

here is the info:
Code: [Select]
A. Control Panel:
   - Kloxo-MR: 7.0.0.c-2017083001
   - Web: hiawatha-10.6.0-f.1.mr.el6.x86_64
   - PHP: php56s - 5.6.31-1.ius.centos6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.9 (Final) x86_64
   - Hostname: discountnow.club
C. Services:
   1. MySQL: MariaDB-server-10.0.32-1.el6.x86_64
   2. PHP:
      - Installed:
        - Branch: php71u-cli-7.1.8-2.ius.centos6.x86_64
        - Multiple:
          * php71m - 7.1.8-2.ius.centos6
      - Used: php71m-fpm
      - Multiple: disable
   3. Web Used: hiawathaproxy
     - Hiawatha: hiawatha-10.6.0-f.1.mr.el6.x86_64
     - Lighttpd: lighttpd-1.4.45-1.el6.x86_64
     - Nginx: nginx-1.13.4-1.el6.ngx.x86_64
     - Apache: httpd24u-2.4.27-1.ius.centos6.x86_64
       - PHP Type: php-fpm_event
       - Secondary PHP: off
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.9-1.mr.el6.x86_64
     - DJBDns: djbdns-1.05-17.4.mr.el6.x86_64
     - NSD: nsd-4.1.16-1.el6.x86_64
     - PowerDNS: pdns-4.0.3-1.el6.MIND.x86_64
     - Yadifa: yadifa-2.2.5-1.mr.el6.x86_64
   6. Mail: qmail-toaster-1.03-1.3.57.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.20.mr.el6.x86_64
      - smtp: qmail-toaster-1.03-1.3.57.mr.el6.x86_64
      - spam: bogofilter-1.2.4-1.el6.x86_64
   7. FTP: pure-ftpd
      - pure-ftpd: pure-ftpd-1.0.37-1.mr.el6.x86_64
   8. Stats: awstats
      - awstats: kloxomr-stats-awstats-7.6-1.mr.noarch


6
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 18:31:13 »
when I do php -m, it's not there
Code: [Select]
[PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dom
exif
fileinfo
filter
ftp
gd
gettext
gmp
hash
iconv
igbinary
imap
intl
json
ldap
libxml
mbstring
mcrypt
mongodb
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
pspell
readline
recode
Reflection
session
shmop
SimpleXML
snmp
soap
sockets
SPL
sqlite3
standard
sysvmsg
sysvsem
sysvshm
tidy
tokenizer
xml
xmlreader
xmlrpc
xmlwriter
xsl
zip
zlib

[Zend Modules]


when I do php -v, it's not there either

Code: [Select]
PHP 7.1.8 (cli) (built: Aug  7 2017 13:45:55) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies


7
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 12:39:46 »
Please look at the attached screenshot of my previous post.

I just showed to you that in 'php module status' the ioncube loader is enable already.

8
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 12:14:36 »
Thanks for the troubleshooting
After I did what you told me to do, now I am running in multiple branch mode. Ioncube installed correctly now.

I don't get it. Why does it have to be that way?

The problem now I am having is that my memory consumption jumped 400 MB more. I did a server reboot and on a clean restart it used to be about 900MB. Now it's at Used 1316 MB.

I have so many modules in php module list enabled and I am not sure which one to disabled. Which one Kloxo is actually using? Does that contribute to the ram consumption?

There 's list from
/etc/php.d/ list
/opt/php56s/etc/php.d/
/opt/php71m/etc/php.d/

Please see screenshot of my my php module list for my ioncube loader.
But when I do command: php -v
I get no message that ioncube is loaded:

PHP 7.1.8 (cli) (built: Aug  7 2017 13:45:55) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies

9
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 10:42:35 »
I see That is PHP it says that I am using php56s but in Branch it's 7.1u.
What does that mean? does kloxo use both of them at the same time?
I have attached my webserver configure. I have only php71u.

Code: [Select]
A. Control Panel:
   - Kloxo-MR: 7.0.0.c-2017083001
   - Web: hiawatha-10.6.0-f.1.mr.el6.x86_64
   - PHP: php56s - 5.6.31-1.ius.centos6 (fpm mode)
B. Plateform:
   - OS: CentOS release 6.9 (Final) x86_64
   - Hostname: discountnow.club
C. Services:
   1. MySQL: MariaDB-server-10.0.32-1.el6.x86_64
   2. PHP:
      - Installed:
        - Branch: php71u-cli-7.1.8-2.ius.centos6.x86_64
      - Used: --PHP Branch--
      - Multiple: disable
   3. Web Used: hiawathaproxy
     - Hiawatha: hiawatha-10.6.0-f.1.mr.el6.x86_64
     - Lighttpd: lighttpd-1.4.45-1.el6.x86_64
     - Nginx: nginx-1.13.4-1.el6.ngx.x86_64
     - Apache: httpd24u-2.4.27-1.ius.centos6.x86_64
       - PHP Type: php-fpm_event
       - Secondary PHP: off
   4. WebCache: none
     - ATS: --uninstalled--
     - Squid: --uninstalled--
     - Varnish: --uninstalled--
   5. Dns: bind
     - Bind: bind-9.9.9-1.mr.el6.x86_64
     - DJBDns: djbdns-1.05-17.4.mr.el6.x86_64
     - NSD: nsd-4.1.16-1.el6.x86_64
     - PowerDNS: pdns-4.0.3-1.el6.MIND.x86_64
     - Yadifa: yadifa-2.2.5-1.mr.el6.x86_64
   6. Mail: qmail-toaster-1.03-1.3.57.mr.el6.x86_64
      - pop3/imap4: courier-imap-toaster-4.1.2-1.3.20.mr.el6.x86_64
      - smtp: qmail-toaster-1.03-1.3.57.mr.el6.x86_64
      - spam: bogofilter-1.2.4-1.el6.x86_64
   7. FTP: pure-ftpd
      - pure-ftpd: pure-ftpd-1.0.37-1.mr.el6.x86_64
   8. Stats: awstats
      - awstats: kloxomr-stats-awstats-7.6-1.mr.noarch

10
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 10:26:49 »
yum update -y
sh /script/ioncube-installer -y

I get the same results:
*** Install ioncube-loader ***
- Getting ioncube-loader from ioncube.com and extracting
- Overwriting '/opt/php56s/etc/php.d/01-ioncube-loader_used.ini'

Like I said before, why does kloxo still think I am using php5.6s?
Even in php module list, all the module of PHP 5.6 are still enable, why is that?

11
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 09:48:50 »
I think they have it, it just came out 2 days ago:
If you manually download it form their site, the package contains this file:

ioncube_loader_lin_7.1.so

The problem is when I edit /etc/php.ini and load it, it get erase when I do this:

sh /script/cleanup
sh /script/fix-dns
sh /script/fixweb
sh /script/restart-all

So how do I load it manually, which php.ini do I edit?
thanks

12
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 09:27:12 »
After I run sh /script/ioncube-installer -y
I get:
- Getting ioncube-loader from ioncube.com and extracting
- Overwriting '/opt/php56s/etc/php.d/01-ioncube-loader_used.ini'

I did the command: nano /opt/php56s/etc/php.d/01-ioncube-loader_used.ini
and here what is inside the file:
end_extension=/opt/ioncube/ioncube_loader_lin_5.6.so

It is suppose to be PHP 7.1 not 5.6

It's not working. And could you please tell me why in PHP Module Status there are still the PHP5.6s module list? I switch to PHP 7, I don't have multiple PHP enable.

It's the same when I do the command:
yum clean all; yum update -y; sh /script/phpm-updater
it updates the PHP 5.6s



13
Kloxo-MR Technical Helps / Re: ioncube not working
« on: 2017-09-04, 08:40:56 »
My ioncube stopped working too after I ugraded to php 7u. I went to 'php modules status" and it is enable there (but I think that is for the wrong version). But when I type php -v command I get nothing. It's not enable. One of my plugin on wordpress that need ioncube stop working.

Can you help me out? I would like to use Php 7u because it seems much faster than 5.3.

14
Kloxo-MR Tips and Tricks / Re: hiawatha proxy setting
« on: 2017-08-24, 19:52:51 »
I have proxy as setup but in watchdog my status of webproxy and webcache is off
does that mean that the hiawatha proxy is not working right?
Please look at the attached screenshot

15
Kloxo-MR Tips and Tricks / Re: hiawatha proxy setting
« on: 2017-08-21, 14:26:07 »
Thanks for your answer

How would you define which domain get the pure hiawatha when I am under hiawattha proxy setting?

I can't seem to find the way to do it.

Pages: [1] 2

Top 4 Global Search Engines:    Google    Bing    Baidu    Yahoo

Page created in 0.031 seconds with 20 queries.

web stats analysis