Messages

1

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-30, 17:09:05 »

Thanks, we figured it out just before reading this. Your commitment to assisting us greatly appreciated.

I think we're good to go. If this version is a stable as our v6 and once we have this all working and figured out, we might be interested in setting up a "Live Demo Site", the current one is flakey at best.

It would be on a high speed backbone, blade server with lots of disk, ram and cpu.

Would this be of interest?

2

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-30, 14:54:54 »

See attached.

I CANNOT add/edit DNS template.

3

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-29, 21:35:43 »

We edit as per the attached image. This is how we do this with V6.5.0.f as per your suggestion here: http://forum.mratwork.com/kloxo-mr-technical-helps/ip-address-and-general-setup/msg39059/#msg39059

The point is, we can't even add a DNS Template.

We just setup a 6.5.0.f test server and we can create a DNS template (please refer to attachment). Note of course that we have not edited this template - just created it to point out that we do this in 6.5 but cannot do anything in v7.

Thanks...

4

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-29, 18:15:02 »

Yikes, I guess I am not explaining this situation.

I CANNOT edit any DNS template, so I cannot add/edit/exchange any "A" record. Again, we can do this fine with 6.5 (several servers in production). As far as we can see, the steps/procedures are the same.

I am out of the office until later today, but when I get back I will spin this guy up and give you access, maybe we're missing something. It is only a test server so I don't care if it gets pooched or someone hacks in. I'll put him on a different private lan (192.168.x.x). It will be pretty much "out of the box" as it was installed.

If this is acceptable, I will advise when he is online.

5

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-29, 02:51:29 »

Thanks again, this server has a Static Private Address (172.168.5.199) - he is not Dynamic.

If we can't crate a DNS template, we cannot create a Domain and therefore no Virtualhosts.

We tried to create a Default DNS template using the inside address (i.e. the one address we are allowed to select). Configure DNS1, DNS2 and gateway. We get an error saying the domain [172.168.5.199] is invalid...

We have been using 6.5 for months and have 35 customers with an average of 4 domains/customer. We had a few kinks/bugs to work through but he runs perfectly.

We followed your install steps - exactly, and configure this new server (v7.x) the same (mail setting, LxGuard, Webserver, PHP etc).

Just can't add out external address anywhere in the panel. We just rechecked every page.

6

Kloxo-MR Technical Helps / Re: DNS Template Assistance.

« on: 2015-08-29, 02:13:22 »

Thank you for the prompt reply - nice to see.

MR, that's just it - we CAN'T add the outside address. We get an error "unable to bind socket...". We've tried to reread as well.

Again, this is not the first time we have setup panels (of any kind), but we cannot find anywhere to add/enter our external address. And to make sure we weren't complete idiots, we went through every configuration page prior to posting so as to not waste everyoneo's valuable time.

Our server (172.168.5.199) is Nated to the outside. Do we have to have him directly connected to the universe? That would seem to be an odd requirement...

7

Kloxo-MR Technical Helps / DNS Template Assistance.

« on: 2015-08-29, 01:55:35 »

This is nuts. We've just setup another server using Kloxo-MR 7. as per this guide:
https://github.com/mustafaramadhan/kloxo/blob/dev/how-to-install.txt

Once setup, we try to enter a DNS template, but it want sto use our INISDE IP address, not the outside:. Her is the basic setup:
Internal Lan: 172.168.5.x
External Lan: 111.222.333.444 (everything is setup correctly with our Registrar). We have done this tons of times, once with Kloxo-MR, several times with ISPconfig,, CentosCP and DA. This one has all the tools we need/want, but setting up basic DNS is a hassle.

For this server, we want to use Kloxo-mr to see if some of the bug fixes have been addressed. Well we can't setup a DNS template and we stil have issues with nginx (but that is not the main concern).

We just want to be able to add DNS templates. The only IP address listed up IP addresses is our internal server ip of 172.168.5.199.

Ideas???

8

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-12-12, 10:05:13 »

Thank you for the assistance, that works fine.

Manually changing DNS entries is a small price to pay for such a very nice system, the interface and features a excellent. A few minor bugs, but nothing significant at this point.

I hope you guys keep up the good work and much success.

Thanks again.

9

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-12-11, 12:21:18 »

We understand this. We can't ADD the external address!

That is the problem.

We are natting from a Static OUTSIDE to a static INSIDE. We have been doing this for years with Webmin/Usrmin/Virtualmin and VestaCP. Surely this guy can do this.

We can connect to the server using the OUTSIDE ADDRESS and DNS names fine and it NATS to the server.

However, we cannot create any DNS templates because we cannot specify the OUTSIDE address.

Login here: https://184.70.107.158:7777/

ID: admin
Pswd: admin1234.

This is a test server and we don't care it if gets hacked or otherwise. It has nothing on it (except basic Centos and Kloxo).

So how do we add OUTSIDE address for DNS templates?

Changing our INTERNAL server address to EXTERNAL will not allow other internal future services to work (such as samba and other items such as internal ftp services).

Thanks.

10

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-12-11, 11:12:13 »

Here it is:

eth0      Link encap:Ethernet  HWaddr 00:1F:BC:03:C6:6F
          inet addr:192.168.1.250  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21f:bcff:fe03:c66f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1754 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1909 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:309504 (302.2 KiB)  TX bytes:2627201 (2.5 MiB)
          Interrupt:26 Base address:0x8000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:70 errors:0 dropped:0 overruns:0 frame:0
          TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20266 (19.7 KiB)  TX bytes:20266 (19.7 KiB)

11

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-12-11, 09:06:21 »

Unfortunately, we trashed the test server. Thinking we might have done something wrong or missed a step, we downloaded the install guide from https://github.com/mustafaramadhan/kloxo.

We will reinstall and post accordingly.

Thanks.

12

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-12-10, 17:38:16 »

I can appreciate that this is all volunteer work and people give their time to work on this project.

But I am wondering as to whether I can expect a reply regarding this post?

This does seem like an excellent product, but we are somewhat concerned that support is questionable since this was posted in November.

Thanks...

13

Kloxo-MR Technical Helps / Re: IP Address and General Setup.

« on: 2014-11-30, 23:44:11 »

this is what I get listed by:
admin -> resources -> ip addresses

OR using the GUI Window:

Home Button -> Administration Group -? Ip Addresses Icon

eth0___localhost     192.168.1.250     localhost    eth0    Unassigned 

I cannot find anywhere to enter my External Address. Maybe I am missing a link/page.

This is the installer I used:
wget https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/mratwork-release-0.0.1-1.noarch.rpm --no-check-certificate

rpm -ivh mratwork-release-0.0.1-1.noarch.rpm

Of course I followed all the required steps first and this is a Fresh Install on a Clean Centos 6.6 (I get the same on Centos 6.5). Not going to Centos 7 for some time.

Thank you for all the assistance.

14

Kloxo-MR Technical Helps / IP Address and General Setup.

« on: 2014-11-25, 15:03:27 »

Good day all, I am confused. I followed the setup steps to install Kloxo MR. All went exceedingly well and was quite happy with the results. I can login successfully via the web and have spent several days reviewing navigation (understanding where things are) and going over as many posts in this forum as reasonable.

So I am now ready to put a real test site into production (it is a domain that I have had for some time and use exclusively for testing).

I am trying to add my external Address and get an error saying it is in use by another server. I have no other server.

When trying to add a reverse dns zone for my external address, I get an error saying it has to be a class "C" address. It is.

I have a few links that I followed to setup "Basic Kloxo" and "First Web Site". Basic setup worked fine, but I can't add a second website (even created the default DNS Templates etc.).

Any help would be appreciated.

Thanks...

15

Kloxo-MR Development / Signup Page.

« on: 2014-10-31, 22:32:26 »

I may be posting this in the wrong area. If so please advise and I will re-post.

We are looking for a Customer Sign up Page. The idea is that a visitor can sign up to create an account, have an activation link sent to them so they can log in and manage their domains.

Is there such a piece available or do we have to create our own?

If we have to create our own, which tables need to be populated with user information?

Thanks.