MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Tips and Tricks => Topic started by: amudy17 on 2014-08-25, 05:38:31
-
How to make IP Public and Local can access from local or public
This is my idea to make my local server have 2 IP local and public can access from public internet and local network,
1. make your name server is your local IP server as primary and secondary is public IP server like google name server at
example :
## Configure DNS Server
#
# vi /etc/resolv.conf
nameserver 192.168.100.3
nameserver 8.8.8.8
nameserver 8.8.4.4
2. setting your PC on local computer using local IP server as primary and secondary as public IP like google DNS.
3. setting your modem to port forwarding as ussually IP use on Kloxo-MR port 80,21,22,443,7777,7778.
3. restart
Success...... on my computer and local server and access from public IP !
-
Better create new thread.
-
did you know, this is a just tips and i am not asking to this forum :D