MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Tips and Tricks => Topic started by: LotsOfQ on 2015-05-01, 16:29:26
-
When I tried these "yum clean all; yum update" "sh /script/upcp" and I would kept on getting tons of these errors.
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libc.so.6()(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libpthread.so.0()(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of libpthread.so.0(GLIBC_2.2.5)(64bit)
sendmail-milter-8.14.4-8.el6.x86_64 has missing requires of rtld(GNU_HASH)
setserial-2.17-25.el6.x86_64 has missing requires of libc.so.6()(64bit)
setserial-2.17-25.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
setserial-2.17-25.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
setserial-2.17-25.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
setserial-2.17-25.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
setserial-2.17-25.el6.x86_64 has missing requires of rtld(GNU_HASH)
setuptool-1.19.9-4.el6.x86_64 has missing requires of config(setuptool) = ('0', '1.19.9', '4.el6')
setuptool-1.19.9-4.el6.x86_64 has missing requires of libc.so.6()(64bit)
setuptool-1.19.9-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
setuptool-1.19.9-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
setuptool-1.19.9-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
setuptool-1.19.9-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
setuptool-1.19.9-4.el6.x86_64 has missing requires of rtld(GNU_HASH)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libc.so.6()(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libcrypt.so.1()(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of libcrypt.so.1(GLIBC_2.2.5)(64bit)
2:shadow-utils-4.1.4.2-19.el6_6.1.x86_64 has missing requires of rtld(GNU_HASH)
shared-mime-info-0.70-6.el6.x86_64 has missing requires of libc.so.6()(64bit)
shared-mime-info-0.70-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
shared-mime-info-0.70-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
shared-mime-info-0.70-6.el6.x86_64 has missing requires of libxml2.so.2()(64bit)
shared-mime-info-0.70-6.el6.x86_64 has missing requires of rtld(GNU_HASH)
slang-2.2.1-1.el6.x86_64 has missing requires of libc.so.6()(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libdl.so.2()(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libdl.so.2(GLIBC_2.2.5)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libm.so.6()(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
slang-2.2.1-1.el6.x86_64 has missing requires of rtld(GNU_HASH)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6()(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libm.so.6()(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of libstdc++.so.6(CXXABI_1.3)(64bit)
1:smartmontools-5.43-1.el6.x86_64 has missing requires of rtld(GNU_HASH)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of libc.so.6()(64bit)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of libssl.so.10(libssl.so.10)(64bit)
spamdyke-5.0.0-7.mr.el6.x86_64 has missing requires of rtld(GNU_HASH)
spawn-fcgi-1.6.3-2.mr.el6.x86_64 has missing requires of libc.so.6()(64bit)
spawn-fcgi-1.6.3-2.mr.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
spawn-fcgi-1.6.3-2.mr.el6.x86_64 has missing requires of rtld(GNU_HASH)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libc.so.6()(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libdl.so.2()(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libdl.so.2(GLIBC_2.2.5)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libpthread.so.0()(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of libpthread.so.0(GLIBC_2.2.5)(64bit)
sqlite-3.6.20-1.el6.x86_64 has missing requires of rtld(GNU_HASH)
strace-4.5.19-1.19.el6.x86_64 has missing requires of libc.so.6()(64bit)
strace-4.5.19-1.19.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
strace-4.5.19-1.19.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
strace-4.5.19-1.19.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
strace-4.5.19-1.19.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
strace-4.5.19-1.19.el6.x86_64 has missing requires of rtld(GNU_HASH)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libc.so.6()(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libcrypt.so.1()(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libpthread.so.0()(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libpthread.so.0(GLIBC_2.2.5)(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of libsvn_fs_util-1.so.0()(64bit)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of perl >= ('1', '5.0', None)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of perl(Digest::MD5) >= ('0', '2.20', None)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of python(abi) = ('0', '2.6', None)
subversion-1.6.11-12.el6_6.x86_64 has missing requires of rtld(GNU_HASH)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of config(sudo) = ('0', '1.8.6p3', '15.el6')
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6()(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.3)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.8)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libdl.so.2()(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libdl.so.2(GLIBC_2.2.5)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libutil.so.1()(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of libutil.so.1(GLIBC_2.2.5)(64bit)
sudo-1.8.6p3-15.el6.x86_64 has missing requires of rtld(GNU_HASH)
system-config-firewall-base-1.2.27-7.2.el6_6.noarch has missing requires of iptables >= ('0', '1.2.8', None)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6()(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libcrypt.so.1()(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of libcrypt.so.1(GLIBC_2.2.5)(64bit)
sysvinit-tools-2.87-5.dsf.el6.x86_64 has missing requires of rtld(GNU_HASH)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6()(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libm.so.6()(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
t1lib-5.1.2-6.el6_2.1.x86_64 has missing requires of rtld(GNU_HASH)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6()(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.6)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.8)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of librt.so.1()(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of librt.so.1(GLIBC_2.2.5)(64bit)
2:tar-1.23-11.el6.x86_64 has missing requires of rtld(GNU_HASH)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6()(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libdl.so.2()(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libdl.so.2(GLIBC_2.2.5)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libm.so.6()(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
1:tcl-8.5.7-6.el6.x86_64 has missing requires of rtld(GNU_HASH)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6()(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libnsl.so.1()(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of libnsl.so.1(GLIBC_2.2.5)(64bit)
tcp_wrappers-7.6-57.el6.x86_64 has missing requires of rtld(GNU_HASH)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6()(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libnsl.so.1()(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of libnsl.so.1(GLIBC_2.2.5)(64bit)
tcp_wrappers-libs-7.6-57.el6.x86_64 has missing requires of rtld(GNU_HASH)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6()(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
14:tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64 has missing requires of rtld(GNU_HASH)
tcsh-6.17-25.el6_6.x86_64 has missing requires of grep
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6()(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libcrypt.so.1()(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of libcrypt.so.1(GLIBC_2.2.5)(64bit)
tcsh-6.17-25.el6_6.x86_64 has missing requires of rtld(GNU_HASH)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6()(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.11)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.8)(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of libutil.so.1()(64bit)
1:telnet-0.17-48.el6.x86_64 has missing requires of rtld(GNU_HASH)
time-1.7-37.1.el6.x86_64 has missing requires of libc.so.6()(64bit)
time-1.7-37.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
time-1.7-37.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
time-1.7-37.1.el6.x86_64 has missing requires of rtld(GNU_HASH)
tmpwatch-2.9.16-4.el6.x86_64 has missing requires of libc.so.6()(64bit)
tmpwatch-2.9.16-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tmpwatch-2.9.16-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tmpwatch-2.9.16-4.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tmpwatch-2.9.16-4.el6.x86_64 has missing requires of rtld(GNU_HASH)
tnef-1.4.9-1.el6.x86_64 has missing requires of libc.so.6()(64bit)
tnef-1.4.9-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tnef-1.4.9-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
tnef-1.4.9-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tnef-1.4.9-1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tnef-1.4.9-1.el6.x86_64 has missing requires of rtld(GNU_HASH)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libc.so.6()(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libm.so.6()(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libpthread.so.0()(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of libpthread.so.0(GLIBC_2.2.5)(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of librt.so.1()(64bit)
tokyocabinet-1.4.33-6.el6.x86_64 has missing requires of rtld(GNU_HASH)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libc.so.6()(64bit)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
3:traceroute-2.0.14-2.el6.x86_64 has missing requires of libm.so.6()(64bit)
So I've finally tried this "sh /script/upcp --force" and when it's done I got that message as I've first install Kloxo-MR. "Congratulations. Kloxo-MR has been installed succesfully as 'MASTER'........"
I am freaking out. So I've tried to logged in Kloxo with my password as admin. Didn't work. So I've tried with default "admin" "admin" and that doesn't work too.
Did I lose all my data and everything? Is there anyway that I can get them back?
-
Look like using other repo instead 'default' by Kloxo-MR. In this situation, upcp may not fix your issue.
Without 'dangerously' action, your data still exists.
Inform here your:
sh /script/sysinfo; dir -l /etc/yum.repos.d; cat /etc/yum.repos.d/mratwork.repo|grep "centos-6"
-
A. Kloxo-MR: 7.0.0.b-2015043001
B. OS: CentOS release 6.6 (Final) x86_64
C. Apps:
1. MySQL: --uninstalled--
2. PHP: --uninstalled--
3. Httpd: --uninstalled--
4. Lighttpd: --uninstalled--
5. Hiawatha: hiawatha-9.12.0-f.4.mr.el6.x86_64 (also as webserver)
6. Nginx: --uninstalled--
7. Cache: --uninstalled--
8. Dns: --uninstalled--
9. Qmail: --uninstalled--
D. Php-type (for Httpd/proxy):
E. Memory:
total used free shared buffers cached
Mem: 1995 342 1652 0 22 159
-/+ buffers/cache: 160 1835
Swap: 2049 0 2049
total 44
-rw-r--r-- 1 root root 1989 Apr 12 04:34 CentOS-Base.repo
-rw-r--r-- 1 root root 1991 Apr 12 04:34 CentOS-Base.repo.rpmnew
-rw-r--r-- 1 root root 638 Apr 12 04:34 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root 647 Apr 12 04:34 CentOS-Debuginfo.repo.rpmnew
-rw-r--r-- 1 root root 289 Apr 12 04:34 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 630 Apr 12 04:34 CentOS-Media.repo
-rw-r--r-- 1 root root 3664 Apr 12 04:34 CentOS-Vault.repo
-rw-r--r-- 1 root root 5394 Apr 12 04:34 CentOS-Vault.repo.rpmnew
-rw-r--r-- 1 root root 7414 May 1 14:23 mratwork.repo
#mirrorlist=http://rpms.mratwork.com/repo/mirrors/centalt-centos-6-$basearch-mirrors.txt
-
By the way, I'm not sure what you meant by this:
Look like using other repo instead 'default' by Kloxo-MR
I only follow the install instruction from here:
https://github.com/mustafaramadhan/kloxo/blob/release/how-to-install.txt
I haven't done anything different. Not sure how did this happened in the first place. I am so confused.
-
Inform here 'yum list glibc*'
-
Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
* mratwork-epel: mirrors.mit.edu
* mratwork-ius-stable: iad.mirror.rackspace.com
0 packages excluded due to repository protections
Installed Packages
glibc.x86_64 2.12-1.149.el6_6.7 @updates
glibc-common.x86_64 2.12-1.149.el6_6.7 @updates
Available Packages
glibc.i686 2.12-1.149.el6_6.7 updates
glibc-devel.i686 2.12-1.149.el6_6.7 updates
glibc-devel.x86_64 2.12-1.149.el6_6.7 updates
glibc-headers.x86_64 2.12-1.149.el6_6.7 updates
glibc-static.i686 2.12-1.149.el6_6.7 updates
glibc-static.x86_64 2.12-1.149.el6_6.7 updates
glibc-utils.x86_64 2.12-1.149.el6_6.7 updates
-
Try remove sendmail-milter with 'yum remove sendmail*'.
-
Done. But I don't see any changes.
-
So, try 'yum clean all; yum update' first. If without problem, you can run 'sh /script/upcp -y' after.
-
When I tried this "yum clean all; yum update"
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of libm.so.6()(64bit)
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
2:irqbalance-1.0.4-10.el6.x86_64 has missing requires of rtld(GNU_HASH)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6()(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
iw-3.10-1.1.el6.x86_64 has missing requires of rtld(GNU_HASH)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6()(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6(GLIBC_2.2.5)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6(GLIBC_2.3)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6(GLIBC_2.3.4)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6(GLIBC_2.4)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libc.so.6(GLIBC_2.7)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libm.so.6()(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of libm.so.6(GLIBC_2.2.5)(64bit)
jasper-libs-1.900.1-16.el6_6.3.x86_64 has missing requires of rtld(GNU_HASH)
There's more... can't post in one post.
-
i am attaching it as text inside zip
-
What's happens if running 'yum install glibc-devel'
-
yum install glibc-devel
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Install Process
Loading mirror speeds from cached hostfile
* mratwork-epel: mirrors.mit.edu
* mratwork-ius-stable: mirror.its.dal.ca
0 packages excluded due to repository protections
Resolving Dependencies
--> Running transaction check
---> Package glibc-devel.x86_64 0:2.12-1.149.el6_6.7 will be installed
--> Processing Dependency: glibc-headers = 2.12-1.149.el6_6.7 for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: glibc = 2.12-1.149.el6_6.7 for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: glibc-headers for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libutil.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libthread_db.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: librt.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libresolv.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_nisplus.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_nis.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_hesiod.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_files.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_dns.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnss_compat.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libnsl.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libm.so.6()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libdl.so.2()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libcrypt.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libcidn.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libanl.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: libBrokenLocale.so.1()(64bit) for package: glibc-devel-2.12-1.149.el6_6.7.x86_64
--> Running transaction check
---> Package glibc.x86_64 0:2.12-1.149.el6_6.7 will be installed
--> Processing Dependency: glibc-common = 2.12-1.149.el6_6.7 for package: glibc-2.12-1.149.el6_6.7.x86_64
---> Package glibc-headers.x86_64 0:2.12-1.149.el6_6.7 will be installed
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.12-1.149.el6_6.7.x86_64
--> Processing Dependency: kernel-headers for package: glibc-headers-2.12-1.149.el6_6.7.x86_64
--> Running transaction check
---> Package glibc-common.x86_64 0:2.12-1.149.el6_6.7 will be installed
---> Package kernel-headers.x86_64 0:2.6.32-504.16.2.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==========================================================================================================================================
Package Arch Version Repository Size
==========================================================================================================================================
Installing:
glibc-devel x86_64 2.12-1.149.el6_6.7 updates 983 k
Installing for dependencies:
glibc x86_64 2.12-1.149.el6_6.7 updates 3.8 M
glibc-common x86_64 2.12-1.149.el6_6.7 updates 14 M
glibc-headers x86_64 2.12-1.149.el6_6.7 updates 612 k
kernel-headers x86_64 2.6.32-504.16.2.el6 updates 3.4 M
Transaction Summary
==========================================================================================================================================
Install 5 Package(s)
Total download size: 23 M
Installed size: 125 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): glibc-2.12-1.149.el6_6.7.x86_64.rpm | 3.8 MB 00:01
(2/5): glibc-common-2.12-1.149.el6_6.7.x86_64.rpm | 14 MB 00:01
(3/5): glibc-devel-2.12-1.149.el6_6.7.x86_64.rpm | 983 kB 00:00
(4/5): glibc-headers-2.12-1.149.el6_6.7.x86_64.rpm | 612 kB 00:00
(5/5): kernel-headers-2.6.32-504.16.2.el6.x86_64.rpm | 3.4 MB 00:00
------------------------------------------------------------------------------------------------------------------------------------------
Total 6.9 MB/s | 23 MB 00:03
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : glibc-2.12-1.149.el6_6.7.x86_64 1/5
warning: /etc/localtime created as /etc/localtime.rpmnew
Installing : glibc-common-2.12-1.149.el6_6.7.x86_64 2/5
Installing : kernel-headers-2.6.32-504.16.2.el6.x86_64 3/5
Installing : glibc-headers-2.12-1.149.el6_6.7.x86_64 4/5
Installing : glibc-devel-2.12-1.149.el6_6.7.x86_64 5/5
Rpmdb checksum is invalid: dCDPT(pkg checksums): glibc-devel.x86_64 0:2.12-1.149.el6_6.7 - u
-
Try 'rpm --rebuilddb' and then 'yum clean all; yum update'
-
Nothing happens when I tried "rpm --rebuilddb"
[root@vps ~]# rpm --rebuilddb
[root@vps ~]#
-
Yes, no message if successful. What's happens for 'yum clean all; yum update -y'?
-
It looks complete but I am still having issue. I can't log into Kloxo-MR. And all the website still down.
[root@vps ~]# yum clean all; yum update -y
Loaded plugins: fastestmirror, priorities, protectbase, replace
Cleaning repos: base extras mratwork-atrpms mratwork-epel mratwork-ius-archive mratwork-ius-stable mratwork-mariadb-32 mratwork-mariadb-64
: mratwork-nginx mratwork-nginx-stable mratwork-release-neutral-noarch mratwork-release-version-arch mratwork-varnish-3.0
: updates
Cleaning up Everything
Cleaning up list of fastest mirrors
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Update Process
Determining fastest mirrors
mratwork-epel/metalink | 13 kB 00:00
* mratwork-epel: mirrors.mit.edu
* mratwork-ius-stable: mirror.its.dal.ca
base | 3.7 kB 00:00
base/primary_db | 4.6 MB 00:01
extras | 3.4 kB 00:00
extras/primary_db | 30 kB 00:00
mratwork-atrpms | 3.0 kB 00:00
mratwork-atrpms/primary_db | 1.7 MB 00:02
mratwork-epel | 4.4 kB 00:00
mratwork-epel/primary_db | 6.5 MB 00:00
mratwork-ius-archive | 2.2 kB 00:00
mratwork-ius-archive/primary_db | 2.3 MB 00:00
mratwork-ius-stable | 2.1 kB 00:00
mratwork-ius-stable/primary_db | 182 kB 00:00
mratwork-mariadb-32 | 2.9 kB 00:00
mratwork-mariadb-32/primary_db | 21 kB 00:00
mratwork-mariadb-64 | 2.9 kB 00:00
mratwork-mariadb-64/primary_db | 22 kB 00:00
mratwork-nginx | 2.9 kB 00:00
mratwork-nginx/primary_db | 35 kB 00:00
mratwork-nginx-stable | 2.9 kB 00:00
mratwork-nginx-stable/primary_db | 37 kB 00:00
mratwork-release-neutral-noarch | 951 B 00:00
mratwork-release-neutral-noarch/primary | 42 kB 00:00
mratwork-release-neutral-noarch 143/143
mratwork-release-version-arch | 951 B 00:00
mratwork-release-version-arch/primary | 80 kB 00:00
mratwork-release-version-arch 198/198
mratwork-varnish-3.0 | 951 B 00:00
mratwork-varnish-3.0/primary | 9.3 kB 00:00
mratwork-varnish-3.0 40/40
updates | 3.4 kB 00:00
updates/primary_db | 3.2 MB 00:01
0 packages excluded due to repository protections
Resolving Dependencies
--> Running transaction check
---> Package dbus.x86_64 1:1.2.24-7.el6_3 will be updated
---> Package dbus.x86_64 1:1.2.24-8.el6_6 will be an update
--> Processing Dependency: dbus-libs = 1:1.2.24-8.el6_6 for package: 1:dbus-1.2.24-8.el6_6.x86_64
--> Processing Dependency: libdbus-1.so.3()(64bit) for package: 1:dbus-1.2.24-8.el6_6.x86_64
---> Package kernel.x86_64 0:2.6.32-504.16.2.el6 will be installed
--> Processing Dependency: dracut-kernel >= 002-18.git413bcf78 for package: kernel-2.6.32-504.16.2.el6.x86_64
---> Package kernel-firmware.noarch 0:2.6.32-504.12.2.el6 will be updated
---> Package kernel-firmware.noarch 0:2.6.32-504.16.2.el6 will be an update
---> Package kloxomr7.noarch 0:7.0.0.b-2015041504.mr will be updated
---> Package kloxomr7.noarch 0:7.0.0.b-2015043001.mr will be an update
---> Package kloxomr7-thirdparty-phpmyadmin.noarch 0:4.4.2-1.mr will be updated
---> Package kloxomr7-thirdparty-phpmyadmin.noarch 0:4.4.4-1.mr will be an update
---> Package tzdata.noarch 0:2015b-1.el6 will be updated
---> Package tzdata.noarch 0:2015d-1.el6 will be an update
--> Running transaction check
---> Package dbus-libs.x86_64 1:1.2.24-8.el6_6 will be installed
---> Package dracut-kernel.noarch 0:004-356.el6_6.2 will be installed
--> Processing Dependency: dracut = 004-356.el6_6.2 for package: dracut-kernel-004-356.el6_6.2.noarch
--> Running transaction check
---> Package dracut.noarch 0:004-356.el6_6.2 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==========================================================================================================================================
Package Arch Version Repository Size
==========================================================================================================================================
Installing:
kernel x86_64 2.6.32-504.16.2.el6 updates 29 M
Updating:
dbus x86_64 1:1.2.24-8.el6_6 updates 207 k
kernel-firmware noarch 2.6.32-504.16.2.el6 updates 14 M
kloxomr7 noarch 7.0.0.b-2015043001.mr mratwork-release-neutral-noarch 6.4 M
kloxomr7-thirdparty-phpmyadmin noarch 4.4.4-1.mr mratwork-release-neutral-noarch 9.1 M
tzdata noarch 2015d-1.el6 updates 441 k
Installing for dependencies:
dbus-libs x86_64 1:1.2.24-8.el6_6 updates 127 k
dracut noarch 004-356.el6_6.2 updates 123 k
dracut-kernel noarch 004-356.el6_6.2 updates 25 k
Transaction Summary
==========================================================================================================================================
Install 4 Package(s)
Upgrade 5 Package(s)
Total download size: 60 M
Downloading Packages:
(1/9): dbus-1.2.24-8.el6_6.x86_64.rpm | 207 kB 00:00
(2/9): dbus-libs-1.2.24-8.el6_6.x86_64.rpm | 127 kB 00:00
(3/9): dracut-004-356.el6_6.2.noarch.rpm | 123 kB 00:00
(4/9): dracut-kernel-004-356.el6_6.2.noarch.rpm | 25 kB 00:00
(5/9): kernel-2.6.32-504.16.2.el6.x86_64.rpm | 29 MB 00:03
(6/9): kernel-firmware-2.6.32-504.16.2.el6.noarch.rpm | 14 MB 00:01
(7/9): kloxomr7-7.0.0.b-2015043001.mr.noarch.rpm | 6.4 MB 00:01
(8/9): kloxomr7-thirdparty-phpmyadmin-4.4.4-1.mr.noarch.rpm | 9.1 MB 00:00
(9/9): tzdata-2015d-1.el6.noarch.rpm | 441 kB 00:00
------------------------------------------------------------------------------------------------------------------------------------------
Total 5.4 MB/s | 60 MB 00:11
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
** Found 17 pre-existing rpmdb problem(s), 'yum check' output follows:
ConsoleKit-0.4.1-3.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
ConsoleKit-libs-0.4.1-3.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
GConf2-2.28.0-6.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
avahi-libs-0.6.25-15.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
cronie-1.4.4-12.el6.x86_64 has missing requires of /usr/sbin/sendmail
dbus-glib-0.86-6.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
dbus-python-0.83.0-6.1.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
eggdbus-0.6-3.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
glibc-2.12-1.149.el6_6.7.x86_64 is a duplicate with glibc-2.12-1.149.el6_6.7.x86_64
glibc-2.12-1.149.el6_6.7.x86_64 is a duplicate with glibc-2.12-1.149.el6_6.7.x86_64
glibc-common-2.12-1.149.el6_6.7.x86_64 is a duplicate with glibc-common-2.12-1.149.el6_6.7.x86_64
glibc-common-2.12-1.149.el6_6.7.x86_64 is a duplicate with glibc-common-2.12-1.149.el6_6.7.x86_64
libnih-1.0.1-7.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
libproxy-0.3.0-10.el6.x86_64 has missing requires of libdbus-1.so.3()(64bit)
policycoreutils-2.0.83-19.47.el6_6.1.x86_64 has missing requires of libdbus-1.so.3()(64bit)
1:quota-3.17-21.el6_5.x86_64 has missing requires of libdbus-1.so.3()(64bit)
upstart-0.6.5-13.el6_5.3.x86_64 has missing requires of libdbus-1.so.3()(64bit)
Updating : kernel-firmware-2.6.32-504.16.2.el6.noarch 1/14
Installing : dracut-004-356.el6_6.2.noarch 2/14
Installing : dracut-kernel-004-356.el6_6.2.noarch 3/14
Installing : 1:dbus-libs-1.2.24-8.el6_6.x86_64 4/14
Updating : 1:dbus-1.2.24-8.el6_6.x86_64 5/14
Installing : kernel-2.6.32-504.16.2.el6.x86_64 6/14
Updating : tzdata-2015d-1.el6.noarch 7/14
Updating : kloxomr7-thirdparty-phpmyadmin-4.4.4-1.mr.noarch 8/14
Updating : kloxomr7-7.0.0.b-2015043001.mr.noarch 9/14
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/ _/
_/ ..:: Kloxo-MR Web Panel ::.. _/
_/ _/
_/ Attention: _/
_/ _/
_/ Run 'sh /script/cleanup' for to make sure running well _/
_/ or 'sh /script/cleanup-simple' (cleanup without fix services configs) _/
_/ _/
_/ Run 'sh /script/upcp' if update from Kloxo-MR 6.5.0 _/
_/ _/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Cleanup : kernel-firmware-2.6.32-504.12.2.el6.noarch 10/14
Cleanup : tzdata-2015b-1.el6.noarch 11/14
Cleanup : kloxomr7-thirdparty-phpmyadmin-4.4.2-1.mr.noarch 12/14
Cleanup : kloxomr7-7.0.0.b-2015041504.mr.noarch 13/14
Cleanup : 1:dbus-1.2.24-7.el6_3.x86_64 14/14
Verifying : kloxomr7-7.0.0.b-2015043001.mr.noarch 1/14
Verifying : 1:dbus-libs-1.2.24-8.el6_6.x86_64 2/14
Verifying : dracut-kernel-004-356.el6_6.2.noarch 3/14
Verifying : kernel-2.6.32-504.16.2.el6.x86_64 4/14
Verifying : kloxomr7-thirdparty-phpmyadmin-4.4.4-1.mr.noarch 5/14
Verifying : dracut-004-356.el6_6.2.noarch 6/14
Verifying : 1:dbus-1.2.24-8.el6_6.x86_64 7/14
Verifying : tzdata-2015d-1.el6.noarch 8/14
Verifying : kernel-firmware-2.6.32-504.16.2.el6.noarch 9/14
Verifying : kloxomr7-thirdparty-phpmyadmin-4.4.2-1.mr.noarch 10/14
Verifying : kloxomr7-7.0.0.b-2015041504.mr.noarch 11/14
Verifying : kernel-firmware-2.6.32-504.12.2.el6.noarch 12/14
Verifying : tzdata-2015b-1.el6.noarch 13/14
Verifying : 1:dbus-1.2.24-7.el6_3.x86_64 14/14
Installed:
kernel.x86_64 0:2.6.32-504.16.2.el6
Dependency Installed:
dbus-libs.x86_64 1:1.2.24-8.el6_6 dracut.noarch 0:004-356.el6_6.2 dracut-kernel.noarch 0:004-356.el6_6.2
Updated:
dbus.x86_64 1:1.2.24-8.el6_6 kernel-firmware.noarch 0:2.6.32-504.16.2.el6 kloxomr7.noarch 0:7.0.0.b-2015043001.mr
kloxomr7-thirdparty-phpmyadmin.noarch 0:4.4.4-1.mr tzdata.noarch 0:2015d-1.el6
Complete!
-
Better reboot (because kernel updated) before running 'sh /script/upcp -y'.
-
It works. I'm back in. But, all my webs are down. I am running nginxproxy but apache is not able to start. So I tried this "sh /script/restart-web -y"
Stopping Varnish Cache: [ OK ]
Starting Varnish Cache: [ OK ]
-------------------------------------------------------------------
Stopping nginx: [ OK ]
Starting nginx: [ OK ]
-------------------------------------------------------------------
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 225 of /opt/configs/apache/conf/defaults/init.conf:
SSLCertificateFile: file '/etc/httpd/.pem' does not exist or is empty
[FAILED]
-------------------------------------------------------------------
Stopping php-fpm: [ OK ]
Starting php-fpm: [ OK ]
-------------------------------------------------------------------
-
Try 'sh /script/fix-all; sh /script/restart-all'.
-
apache still not running
-
Bind Dns Server is not restarting too
-
Try select 'none' for all options in 'switch programs' and than change to like you want. The same ways for 'php type' where select to 'suphp' and then select to 'php-fpm_event'.
-
still no luck
-
None of the web server I picked work. I've tried apache, nginxproxy, hiawatha, etc. They all don't start.
-
sh /script/fix-all; sh /script/restart-all
*** Process for HTTPD service ***
Starting httpd: Syntax error on line 225 of /opt/configs/apache/conf/defaults/init.conf:
SSLCertificateFile: file '/etc/httpd/.pem' does not exist or is empty
[FAILED]
- Process with 'apachectl': graceful
apachectl: Configuration syntax error, will not run "graceful":
Syntax error on line 225 of /opt/configs/apache/conf/defaults/init.conf:
SSLCertificateFile: file '/etc/httpd/.pem' does not exist or is empty
No message for graceful
-
Try 'sh /script/cleanup; sh /script/set-default-ssl'
-
sh /script/cleanup; sh /script/set-default-ssl
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 225 of /opt/configs/apache/conf/defaults/init.conf:
SSLCertificateFile: file '/etc/httpd/.pem' does not exist or is empty
[FAILED]
-------------------------------------------------------------------
-
It's something wrong because location for 'default' ssl file in '/home/kloxo/httpd/ssl/' instead '/etc/httpd/'.
Give me an access to your ssh and Kloxo-MR panel. Send via PM.
I want to know why it's happens in your server.
-
PM sent
-
after sh /script/cleanup
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
on and on...
What can I do to fix it?
-
Inform here 'hostname; hostname -f; hostname -s'.
-
vps84750
vps84750.mydomain.com
vps84750
-
Run 'sh /script/set-hosts'
-
I now get this when tried "sh /script/cleanup"
Stopping httpd: [ OK ]
Starting httpd: httpd.event: Could not reliably determine the server's fully qualified domain name, us ing 129.my.ip.127 for ServerName
[ OK ]
-
Inform here 'cat /etc/hosts'
-
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
127.0.1.1 vps84750.mydomin.com vps84750
### begin - add by Kloxo-MR
138.my.ips.129 vps84750 vps84750
### end - add by Kloxo-MR
-
Change between '###' to 'YOURPUBLICIP vps84750.domain.com vps84750'.
-
Perfect! No more error when "sh /script/cleanup"
-
Bad News :-[ :(
Everything was working fine so I took a few hours break... ate and long nap. I open up my thundbird to check emails and got errors. So I do into my webmail Roundcube and got this message a the login page. Connection to storage server failed.
So I tried "sh /script/fix-all; sh /script/restart-all"
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
Yep, got that again. So I tried "sh /script/cleanup" again.
*** Restart services - BEGIN ***
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]
-------------------------------------------------------------------
Shutting down MySQL.. SUCCESS!
Starting MySQL. SUCCESS!
-------------------------------------------------------------------
Stopping nsd: [ OK ]
Starting nsd: [ OK ]
-------------------------------------------------------------------
Stopping Varnish Cache: [ OK ]
Starting Varnish Cache: [ OK ]
-------------------------------------------------------------------
Stopping nginx: [ OK ]
Starting nginx: [ OK ]
-------------------------------------------------------------------
Stopping httpd: [ OK ]
Starting httpd: httpd.event: apr_sockaddr_info_get() failed for vps84750.mydomain.com\r
httpd.event: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[ OK ]
-------------------------------------------------------------------
*** Process for QMAIL service ***
Stopping qmail-toaster: svscan qmail logging.
qmail-send: no process killed
Starting qmail-toaster: svscan.
-------------------------------------------------------------------
- For help, type '/script/restart-mail [--help|-h]'
-------------------------------------------------------------------
Stopping xinetd: [ OK ]
Starting xinetd: [ OK ]
-------------------------------------------------------------------
Execute fixlxphpexe for php54s...
Stopping kloxo-phpcgi: hostname: Unknown hosthostname
: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
[ OK ]
Starting kloxo-phpcgi: [ OK ]
Stopping kloxo-hiawatha: hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
[ OK ]
Starting kloxo-hiawatha: [ OK ]
-------------------------------------------------------------------
Stopping php54m-fpm: [ OK ]
Starting php54m-fpm: [ OK ]
-------------------------------------------------------------------
*** Restart services - END ***
*** Process Time: 00:00:02:57.177063 (dd:hh:mm:ss:xxxxxx) ***
[root@vps84750 ~]# hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
hostname: Unknown host
on and on....
-
[root@vps84750 ~]# hostname; hostname -f; hostname -s
vps84750.mydomain.com
hostname: Unknown host
vps84750
-
You must change hostname in VPS control panel. Without it, every time you reboot, hostname will be back to previous. And or ask to your provider.
-
It's weird that I didn't make any changes before. And it was working fine the way it was. But everything goes wrong after the update. Before I didn't have this issue.
-
Kloxo-MR didn't touch /etc/hosts except in install process (running upcp).
So, ask to your provider. It's not Kloxo fault but your provider problem.
-
I've asked them. I've spend almost 30mins with him. He assure me that there's nothing on their end that restore back after each reboot.
I did more research and found /etc/resolv.conf. What should be on that file?
-
I am giving up. I cannot fix this. I will do a new install and give Kloxo-MR another try. I really wish I stick with it because it's free. But I can't keep on messing with it. I have all my websites in one vps. If new install doesn't workout then it's time to go back to cPanel when I hate to pay for it. But it's stable.
By the way what is the best way to backup all clients/domains/reseller/accounts. Like backup even mails that are on the server. So once the new install is done I can restore them back with password and everything. Is possible? I know cPanel has that option.
-
Use backup/restore features.
Again, It's not Kloxo-MR issue but your server itself.
-
If it's the server itself then you think it's useless for me to start over on a fresh install? Am I wasting time?
-
I am sure with your wrong setting for hostname, ifcfg-eth0 and weird server CPanel also have a problem!.
That it.
-
With backup/restore, can I just backup admin and that should backup everything? I just have to make one backup and restore one time right instead of backing up each client/user?
-
Via 'admin > backup/restore' will be backup everything. Via 'admin > clients > (each client) > backup/restore' only backup per-client.
-
Cool, thank you. Downloading backup now. Will reinstall VPS and give Kloxo-MR 7 a fresh start. I hope all goes well.
-
Is there anything wrong?
Last Backup Status: program_interrupted
Is the backup file corrupted? I don't want to not able to restore in the new install.
-
Maybe not. Check backup file after an hour (depend on how big your backup and your resource/cpu power).
-
I have a fresh install. Hostname seem fine. I am trying to restore but I can't upload the restorefile.tgz. Everytime I using the first upload option I get this from my firefox browser until I reboot.
Secure Connection Failed
How can I upload?
-
Did you tried 'admin > backup/restore > upload'?
-
yep, that's where I get there errors. I cannot upload or get errors.
7778 = The connection was reset
7777 = Secure Connection Failed
-
I didn't found this issue in my testing server a couple minutes ago (ssl and non-ssl).
How big your backup file.
-
868 MB
-
Use ftp instead upload directly.
-
I use Filezilla and I cannot connect as "admin"
Response: 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb
Error: Could not connect to server
So I've create an FTP User and connect as that user but the same errors.
Status: Connecting to 192.my.ips.112:21...
Status: Connection established, waiting for welcome message...
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Command: USER newuser20
Response: 331 User newuser20 OK. Password required
Command: PASS ***********
Response: 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb
Error: Could not connect to server
Status: Waiting to retry...
Status: Connecting to 192.my.ips.112:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 1 of 5000 allowed.
Response: 220-Local time is now 21:25. Server port: 21.
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: AUTH TLS
Response: 234 AUTH TLS OK.
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Command: USER newuser20
Response: 331 User newuser20 OK. Password required
Command: PASS ***********
Response: 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb
Error: Could not connect to server
-
Like pure-ftp said run 'pure-pw mkdb'. Also better also run 'sh /script/fixftp-all; sh /script/restart-ftp -y'.
-
[root@server ~]# pure-pw mkdb
Unable to open the passwd file: No such file or directory
[root@server ~]# sh /script/fixftp-all; sh /script/restart-ftp -y
Initialize PureFtp service
- Initialize process
Make pure-ftpd user database
- Restart xinetd service for pureftp
- For help, type '/script/fixftpuser [--help|-h]'
- No argument supplied. Defaulting to localhost (master) servers
Fixing FTP User
- 'newuser20' ('admin') at 'localhost'
Unable to open the passwd file: No such file or directory
*** Process Time: 00:00:00:00.586 (dd:hh:mm:ss:xxxxxx) ***
Stopping xinetd: [ OK ]
Starting xinetd: [ OK ]
-------------------------------------------------------------------
- For help, type '/script/restart-ftp [--help|-h]'
[root@server ~]#
-
Inform here 'dir -l /etc/pure-ftpd'
-
I don't know if these issues are related. When I am in "admin — {Servers}" I noticed one listed "localhost" but it showed as "Not Used".
When I select the "localhost" take me to "admin — Servers — {Server}". I noticed the following.
? Buffers 6 MB 1996 MB
? Cached 233 MB 1996 MB
? Real Mem 251 MB 1996 MB
Those showed as "Exceeded".
Also just to be sure I am on the right path. After the fresh installed I have not added any domain or client. I wanted to restore the backup file first. Do I have to add a user/client or domain first?
-
[root@server ~]# dir -l /etc/pure-ftpd
total 24
-rw-r--r-- 1 root root 11474 Mar 12 02:11 pure-ftpd.conf
-rw-r--r-- 1 root root 2009 Dec 16 09:42 pureftpd-ldap.conf
-rw-r--r-- 1 root root 3473 Mar 12 02:10 pureftpd-mysql.conf
-rw-r--r-- 1 root root 0 May 2 21:47 pureftpd.passwd.oldsaved
-rw-r--r-- 1 root root 2907 Sep 7 2011 pureftpd-pgsql.conf
-
Try rename 'pureftpd.passwd.oldsaved' to 'pureftpd.passwd' and run again fixftp-all and restart-ftp
-
Just want to make sure, did you read this post?
http://forum.mratwork.com/kloxo-mr-tips-and-tricks/did-i-lost-all-my-data/msg42751/#msg42751
-
I renamed 'pureftpd.passwd.oldsaved' to 'pureftpd.passwd' but when I run "sh /script/fixftp-all; sh /script/restart-ftp -y"
[root@server ~]# sh /script/fixftp-all; sh /script/restart-ftp -y
Initialize PureFtp service
- Initialize process
Make pure-ftpd user database
- Restart xinetd service for pureftp
- For help, type '/script/fixftpuser [--help|-h]'
- No argument supplied. Defaulting to localhost (master) servers
Fixing FTP User
- 'newuser20' ('admin') at 'localhost'
Unable to open the passwd file: No such file or directory
*** Process Time: 00:00:00:00.458 (dd:hh:mm:ss:xxxxxx) ***
Stopping xinetd: [ OK ]
Starting xinetd: [ OK ]
Then I go back and check the file and noticed after "sh /script/fixftp-all; sh /script/restart-ftp -y" renamed back to "pureftpd.passwd.oldsaved".
-
When you run 'pure-pw mkdb', this process try create pureftpd.pdb from pureftpd.passwd but missing pureftpd.passwd. So, why advice to rename pureftpd.passwd.oldsaved to pureftpd.passwd.
Fixftp-all try with another way.
-
Or try 'yum reinstall pure-ftpd -y; sh /script/cleanup'.
-
I give up. Doing one more reinstall of my VPS and Kloxo-MR.
-
Did you add dummy domain for the first time?.
-
No, I didn't add anything domain/user/client etc.
I've just done a brand new install of Centos 6 and Kloxo-MR 7 and got the same issue with FTP.
-
After added a dummy domain FTP works. But I cannot login with user admin or root. But I can with the users I created. But that only have access to the dummy domain directories. It doesn't have access to /home/admin/.
Where can I upload the backup file to for restore?
-
Try add dummy domain first (like 'iamamannotawoman.com') and then user ftp user of iamamannotawoman.com as username (need reset password for this user).
-
Do
After added a dummy domain FTP works. But I cannot login with user admin or root. But I can with the users I created. But that only have access to the dummy domain directories. It doesn't have access to /home/admin/.
Where can I upload the backup file to for restore?
Doesn't matter your backup file inside /home/admin/<dummy>. After upload finished, use 'file manager' to move (cut-paste) to '/home/kloxo/client/admin/__backup'
-
When inside '/home/kloxo/client/admin/__backup' there's no paste option.
-
Or using 'sh /script/restore'.
-
I just wanted to come back and report. I end up using the ftp option in the upload options. Since I have ftp backup file to the "newuser20" account. I just have to setup ftp option in the restore >> upload. And to my surprise it works. I did managed to restore all but two data was corrupted. For some reasons it was empty.
So back to the "unknown host" thing. I did a fresh installed of Centos 6 and changed the hostname right away before I install Kloxo-MR. It sticks. I reboot as many times no problem.
I guess it was not the server that not allowing it to stick. There's something to it. I don't know.
Anyway, I will keep my eyes on this. Now it's time for this.
http://forum.mratwork.com/kloxo-mr-tips-and-tricks/kloxomr-optimize/