MRatWork Forum by Mustafa Ramadhan

Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: Viking on 2013-05-18, 21:47:23

Title: Re-update errors
Post by: Viking on 2013-05-18, 21:47:23: Mustafa are still errors and problems after the update done today with emails.
Here are the errors in the implementation of 'sh/script/restart-services':
Code: [Select]
sh /script/restart-services Zatrzymywanie named: [ OK ] Uruchamianie named: [ OK ] Zatrzymywanie httpd: [ OK ] Uruchamianie httpd: [ OK ] Zatrzymywanie n.inx: [ OK ] Uruchamianie nginx: [ OK ] Stopping qmail-toaster: svscan qmail logging. Starting qmail-toaster: svscan. supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire clamd/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure Zatrzymywanie xinetd: [ OK ] Uruchamianie xinetd: [ OK ] Zatrzymywanie mysqld: [ OK ] Uruchamianie mysqld: [ OK ]Kloxo mails stopped me quite work.
I made the following command: 'yum remove *-toaster; yum install *-toaster; sh /script/fixmail-all' which also erased:
Code: [Select]
Removing for dependencies: cronie x86_64 1.4.4-7.el6 @base 166 k cronie-anacron x86_64 1.4.4-7.el6 @base 43 k crontabs noarch 1.10-33.el6 @base 2.4 k webalizer x86_64 2.21_02-3.3.el6 @base 324 kAfter upgrading my server is not suitable for use.
Each new update server breaks down more and more.
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-18, 22:37:00: It's weird. Because I didn't found this issue when update server for this forum.

Yes, I was change restart process for qmail. Originally, qmail restart just stop and start send but with change restart is qmail stop and start.
Title: Re: Re-update errors
Post by: Viking on 2013-05-18, 22:49:05: Quote from: "MRatWork"
It's weird. Because I didn't found this issue when update server for this forum.

Yes, I was change restart process for qmail. Originally, qmail restart just stop and start send but with change restart is qmail stop and start.
Mustafa does not help. I write for a few months, I have problems with Kloxo-MR. Ever since I installed the new Kloxo-MR on Centos 6.4 64bit I'm still having problems with emails with each update.
Do you want to restore it from a backup and data frames you'll see it for yourself.
Title: Re: Re-update errors
Post by: Viking on 2013-05-18, 22:58:45: Restore from backup and reinstall the update:
Code: [Select]
sh /script/restart-services Zatrzymywanie named: . [ OK ] Uruchamianie named: [ OK ] Zatrzymywanie httpd: [ OK ] Uruchamianie httpd: [ OK ] Zatrzymywanie n.inx: [ OK ] Uruchamianie nginx: [ OK ] Stopping qmail-toaster: svscan qmail logging. Starting qmail-toaster: svscan. supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire clamd/supervise/lock: temporary failure Zatrzymywanie xinetd: [ OK ] Uruchamianie xinetd: [ OK ] Zatrzymywanie mysqld: [ OK ] Uruchamianie mysqld: [ OK ]
Code: [Select]
https://1xx.xx.xx.xx:7777/login/ 500 - Internal Server Error'sh /script/cleanup'
Code: [Select]
sh /script/restart-services Zatrzymywanie named: . [ OK ] Uruchamianie named: [ OK ] Zatrzymywanie httpd: [ OK ] Uruchamianie httpd: [ OK ] Zatrzymywanie n.inx: [ OK ] Uruchamianie nginx: [ OK ] Stopping qmail-toaster: svscan qmail logging. Starting qmail-toaster: svscan. supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire clamd/supervise/lock: temporary failure Zatrzymywanie xinetd: [ OK ] Uruchamianie xinetd: [ OK ] Zatrzymywanie mysqld: [ OK ] Uruchamianie mysqld: [ OK ]Mustafa and Pomeranians to solve problems or should I look for another dashboard?
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 00:02:32: With last update, we don't need reinstall qmail. It's because qmail restart not the same as with stop+start. It's why after update + run cleanup, qmail restart have a problem.

I found a problem where nginx from centralt (1.5.0) no replace for old nginx (1.4.1). So, update nginx became we have 2 version on server.
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 00:07:40: Ok. give me your ssh and kloxo password via PM. Or, discuss via YM or GTalk
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 01:13:25: Quote from: "MRatWork"
Ok. give me your ssh and kloxo password via PM. Or, discuss via YM or GTalk
Sent data on PM.
Write what you need to do is to update proceeded correctly.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 03:15:56: Mustafa but the emails do not work. Unable to retrieve e-mails:
http://www.zimagez.com/zimage/przechwyc ... 221130.php (http://www.zimagez.com/zimage/przechwycenieobrazuekranu-18052013-221130.php)
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 03:24:57: In addition, it is now a very large consumption of RAM. 1GB RAM consumes.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 18:04:51: Parties acting on python also stopped working. Mustafa after you've done an unofficial update python?
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 19:43:17: Kloxo/Kloxo-MR not related to perl, phyton, java and ROR. If you have a problem maybe update from repo (Centos or others).

FIY, server for this forum using VPS with 4GB RAM. Memory usage 2GB from the start because PHP and MySQL optimizing. Memory usage no more then 3.75GB (swap always 0) in high traffic.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 19:50:40: Quote from: "MRatWork"
Kloxo/Kloxo-MR not related to perl, phyton, java and ROR. If you have a problem maybe update from repo (Centos or others).

FIY, server for this forum using VPS with 4GB RAM. Memory usage 2GB from the start because PHP and MySQL optimizing. Memory usage no more then 3.75GB (swap always 0) in high traffic.
Sorry python updates of your repositories and hand on me after updating phyton work with error 503
Kloxo assumed was supposed to be a light panel, not the machine with 4GB of ram. So if I have a vps with 1GB of RAM your panel on the vps will not work I mean?
Oddly enough because most of the panels do not have such needs enough RAM.
So you have to look for another panel so he could work on vps with 1GB of RAM?
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 19:57:29: Python 2.7 is updated with your repository is not from an official and is not fully depending on it.
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 20:53:42: Kloxo-MR able install on server with ram 256MB (maybe less) for nginx-proxy + php 53. If you found memory usage near 1GB for default config of Kloxo-MR that mean: (1) counting memory usage including cached and buffers, (2) any applications eating memory quickly (example rapidleech), (3) cronjob execute high process, and (4) other possibilty.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 21:43:25: Quote from: "MRatWork"
Kloxo-MR able install on server with ram 256MB (maybe less) for nginx-proxy + php 53. If you found memory usage near 1GB for default config of Kloxo-MR that mean: (1) counting memory usage including cached and buffers, (2) any applications eating memory quickly (example rapidleech), (3) cronjob execute high process, and (4) other possibilty.
Mustafa problem is that the two domains Kloxo-MR uses about 1GB of RAM. On one side of a small amount of users online and 1 default page. So the default configuration Kloxo-MR is incorrect.
I am doing a new installation for a test Kloxo-MR and see if you still are problems with emails on it.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 21:54:34: Mustafa immediately after a new installation are the errors:
Code: [Select]
sh /script/restart-services Zatrzymywanie named: . [ OK ] Uruchamianie named: [ OK ] Zatrzymywanie httpd: [ OK ] Uruchamianie httpd: [ OK ] Stopping qmail-toaster: svscan qmail logging. Starting qmail-toaster: svscan. supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to acquire log/supervise/lock: temporary failure Zatrzymywanie xinetd: [ OK ] Uruchamianie xinetd: [ OK ] Zatrzymywanie mysqld: [ OK ] Uruchamianie mysqld: [ OK ]So any errors in the same package have kloxorm rpm.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 22:14:53: And it is the same problem with emails as the renovation:
(http://www.zimagez.com/miniature/przechwycenieobrazuekranu-19052013-170244.php) (http://www.zimagez.com/zimage/przechwycenieobrazuekranu-19052013-170244.php)
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 22:19:38: Quote from: "Viking"
Quote from: "MRatWork"
Kloxo-MR able install on server with ram 256MB (maybe less) for nginx-proxy + php 53. If you found memory usage near 1GB for default config of Kloxo-MR that mean: (1) counting memory usage including cached and buffers, (2) any applications eating memory quickly (example rapidleech), (3) cronjob execute high process, and (4) other possibilty.
Mustafa problem is that the two domains Kloxo-MR uses about 1GB of RAM. On one side of a small amount of users online and 1 default page. So the default configuration Kloxo-MR is incorrect.
I am doing a new installation for a test Kloxo-MR and see if you still are problems with emails on it.
For php-fpm, memory usage depend on how many client you set (with assumsion the same config for all clients).
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 22:23:09: Inform here 'sh /script/sysinfo' for vps that you think have 1 GB memory usage.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 22:31:12: Quote from: "MRatWork"
Quote from: "Viking"
Quote from: "MRatWork"
Kloxo-MR able install on server with ram 256MB (maybe less) for nginx-proxy + php 53. If you found memory usage near 1GB for default config of Kloxo-MR that mean: (1) counting memory usage including cached and buffers, (2) any applications eating memory quickly (example rapidleech), (3) cronjob execute high process, and (4) other possibilty.
Mustafa problem is that the two domains Kloxo-MR uses about 1GB of RAM. On one side of a small amount of users online and 1 default page. So the default configuration Kloxo-MR is incorrect.
I am doing a new installation for a test Kloxo-MR and see if you still are problems with emails on it.
For php-fpm, memory usage depend on how many client you set (with assumsion the same config for all clients).
I use fcgid_event ninginx-proxy + php 53u because suphp stopped working properly some time ago.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 22:43:53: Quote from: "MRatWork"
Inform here 'sh /script/sysinfo' for vps that you think have 1 GB memory usage.
Code: [Select]
/script/sysinfo A. Kloxo-MR: 6.5.0.f-2013031812 B. OS: CentOS release 6.4 (Final) x86_64 C. Apps: 1. MySQL: mysql-5.5.29-1.el6.x86_64 2. PHP: php53u-5.3.24-1.ius.el6.x86_64 3. Httpd: httpd-2.2.24-1.el6.x86_64 4. Lighttpd: --uninstalled-- 5. Nginx: nginx-1.5.0-1.el6.x86_64 6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64 7. Dns: bind-9.9.2-3.P2.el6.x86_64 D. Php-type (for Httpd/proxy): fcgid_event E. Memory: total used free shared buffers cached Mem: 2048 808 1239 0 0 543 -/+ buffers/cache: 264 1783 Swap: 2048 0 2048There are two pages. 1 page is the default and nothing on it is not in the two is small service with a small amount of users online. Historically, in previous versions of Kloxo-MR consume less than 250mb ram.
Title: Re: Re-update errors
Post by: MRatWork on 2013-05-19, 23:03:07: Quote from: "Viking"
Quote from: "MRatWork"
Inform here 'sh /script/sysinfo' for vps that you think have 1 GB memory usage.
Code: [Select]
/script/sysinfo A. Kloxo-MR: 6.5.0.f-2013031812 B. OS: CentOS release 6.4 (Final) x86_64 C. Apps: 1. MySQL: mysql-5.5.29-1.el6.x86_64 2. PHP: php53u-5.3.24-1.ius.el6.x86_64 3. Httpd: httpd-2.2.24-1.el6.x86_64 4. Lighttpd: --uninstalled-- 5. Nginx: nginx-1.5.0-1.el6.x86_64 6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64 7. Dns: bind-9.9.2-3.P2.el6.x86_64 D. Php-type (for Httpd/proxy): fcgid_event E. Memory: total used free shared buffers cached Mem: 2048 808 1239 0 0 543 -/+ buffers/cache: 264 1783 Swap: 2048 0 2048
1. Real memory usage is 264 (-/+ buffers/cache used)
2. 64bit use more memory compare to 32bit (1.1-1.25 x)
3. Nginx + apache need more memory compare to apache alone
4. MySQL 5.5 need more memory compare to 5.0.x (Kloxo still using 5.0.x)
5. Centos 6 need more memory compare to Centos 5 (Kloxo not able installed on Centos 6)
There are two pages. 1 page is the default and nothing on it is not in the two is small service with a small amount of users online. Historically, in previous versions of Kloxo-MR consume less than 250mb ram.
Title: Re: Re-update errors
Post by: Viking on 2013-05-19, 23:30:17: And the other problems that are described in the updated and new installation?