MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: Viking on 2013-06-15, 23:02:15
-
Mustafa after the new update, you can download your mail. I got this error:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
-
Mustafa after the new update, you can download your mail. I got this error:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
Where you found this issue?. Maybe from log?
-
Mustafa after the new update, you can download your mail. I got this error:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
Where you found this issue?. Maybe from log?
It shows in my console while downloading mail from the server.
I view error logs and e-mail at home.
-
Mustafa after the new update, you can download your mail. I got this error:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
Where you found this issue?. Maybe from log?
It shows in my console while downloading mail from the server.
I view error logs and e-mail at home.
Inform here part of error logs here, expecially your issue.
-
Mustafa after the new update, you can download your mail. I got this error:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
Where you found this issue?. Maybe from log?
It shows in my console while downloading mail from the server.
I view error logs and e-mail at home.
Inform here part of error logs here, expecially your issue.
* Account 'yyyyyy': Connecting to POP3 server: mail.xxxxx.pl...
[17:55:14] POP3< +OK <4495.1371311714@aaaa.bbbb.pl>
[17:55:14] POP3> USER yyyyyyyy@xxxxxxx.pl
[17:55:14] POP3< +OK
[17:55:14] POP3> PASS ********
[17:55:14] POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
*** B??d podczas przetwarzania wiadomo?ci.This is the log server responses while getting mail from him.
The version 6.5.0.f-2013031820 is OK:
19:19:52] POP3< +OK <3742.1371316792@aaaaaa.bbbbb.pl>
[19:19:52] POP3> USER yyyyyyy@xxxxxxxxx.pl
[19:19:52] POP3< +OK
[19:19:52] POP3> PASS ********
[19:19:52] POP3< +OK
[19:19:52] POP3> STAT
[19:19:52] POP3< +OK 1 1297
[19:19:52] POP3> UIDL
[19:19:52] POP3< +OK
[19:19:53] POP3> LIST
[19:19:53] POP3< +OK
[19:19:53] POP3> QUIT
[19:19:53] POP3< +OK
-
Compare content of /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run between .20 and .21.
-
Compare content of /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run between .20 and .21.
I compare the version 6.5.0.f-2013031820?
-
Compare content of /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run between .20 and .21.
I compare the version 6.5.0.f-2013031820?
If you have this files.
-
Compare content of /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run between .20 and .21.
I compare the version 6.5.0.f-2013031820?
If you have this files.
That's my version of what 6.5.0.f-2013031820:
(http://www.zimagez.com/miniature/przechwycenieobrazuekranu-15062013-205317.php) (http://www.zimagez.com/zimage/przechwycenieobrazuekranu-15062013-205317.php)
pop3
(http://www.zimagez.com/miniature/przechwycenieobrazuekranu-15062013-205433.php) (http://www.zimagez.com/zimage/przechwycenieobrazuekranu-15062013-205433.php)
pop3-ssl
-
Run files already change since .21/.22 and then become:
pop3:
#!/bin/sh
PASSPROG="/home/vpopmail/bin/vchkpw"
HOSTNAME=`hostname --fqdn`
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=110
exec /usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -c 200 $IP $PORT
/var/qmail/bin/qmail-popup $HOSTNAME
$PASSPROG /var/qmail/bin/qmail-pop3d Maildir 2>&1
pop3-ssl:
#!/bin/sh
HOSTNAME=`hostname --fqdn`
rm -rf "./env/*";
cat /etc/courier/pop3d-ssl | /usr/bin/envconv
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=995
exec /usr/bin/envdir ./env/
/usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -H -l $HOSTNAME $IP $PORT
/usr/bin/couriertls -server -tcpd
/usr/sbin/pop3login
/usr/bin/pop3d Maildir 2>&1
-
Run files already change since .21/.22 and then become:
pop3:
#!/bin/sh
PASSPROG="/home/vpopmail/bin/vchkpw"
HOSTNAME=`hostname --fqdn`
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=110
exec /usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -c 200 $IP $PORT
/var/qmail/bin/qmail-popup $HOSTNAME
$PASSPROG /var/qmail/bin/qmail-pop3d Maildir 2>&1
pop3-ssl:
#!/bin/sh
HOSTNAME=`hostname --fqdn`
rm -rf "./env/*";
cat /etc/courier/pop3d-ssl | /usr/bin/envconv
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=995
exec /usr/bin/envdir ./env/
/usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -H -l $HOSTNAME $IP $PORT
/usr/bin/couriertls -server -tcpd
/usr/sbin/pop3login
/usr/bin/pop3d Maildir 2>&1
What should I do? Because incomprehensible.
-
Try change '$SOFTLIMITVAR' to '48000000' and then restart qmail with 'qmailctl restart'. Alternatively for restart run 'qmailctl stop; sleep 10; qmailctl start'.
-
Try change '$SOFTLIMITVAR' to '48000000' and then restart qmail with 'qmailctl restart'. Alternatively for restart run 'qmailctl stop; sleep 10; qmailctl start'.
OK but which version do I change it? In 6.5.0.f-2013031820 or 6.5.0.f-2013031821?
-
Change since .21.
-
Change since .21.
To write that in 6.5.0.f-2013031821. Because incomprehensible what is .21. :lol:
I'll update again to 21 and check it out.
-
Change since .21.
To write that in 6.5.0.f-2013031821. Because incomprehensible what is .21. :lol:
I'll update again to 21 and check it out.
Already update to .22 because move certain code to rpm (for qmail-toaster)
-
Change since .21.
To write that in 6.5.0.f-2013031821. Because incomprehensible what is .21. :lol:
I'll update again to 21 and check it out.
Already update to .22 because move certain code to rpm (for qmail-toaster)
There is no update 22 There is only update 21:
Available Packages
kloxomr.noarch 6.5.0.f-2013031821.mr kloxo-mr-release-neutral-noarch
-
Run 'yum clean up' first
-
Run files already change since .21/.22 and then become:
pop3:
#!/bin/sh
PASSPROG="/home/vpopmail/bin/vchkpw"
HOSTNAME=`hostname --fqdn`
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=110
exec /usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -c 200 $IP $PORT
/var/qmail/bin/qmail-popup $HOSTNAME
$PASSPROG /var/qmail/bin/qmail-pop3d Maildir 2>&1
pop3-ssl:
#!/bin/sh
HOSTNAME=`hostname --fqdn`
rm -rf "./env/*";
cat /etc/courier/pop3d-ssl | /usr/bin/envconv
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=995
exec /usr/bin/envdir ./env/
/usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -H -l $HOSTNAME $IP $PORT
/usr/bin/couriertls -server -tcpd
/usr/sbin/pop3login
/usr/bin/pop3d Maildir 2>&1
I have to change it in 22 or have unnecessary?
-
In .22 only bugfix for clearcache.
-
Inform here 'yum list|grep krb'
-
Inform here 'yum list|grep krb'
yum list|grep krb
krb5-devel.x86_64 1.10.3-10.el6_4.3 @updates
krb5-libs.x86_64 1.10.3-10.el6_4.3 @updates
dcap-tunnel-krb.x86_64 2.47.7-1.el6 kloxo-mr-epel
freeradius-krb5.x86_64 2.1.12-4.el6_3 base
krb5-appl-clients.x86_64 1.0.1-7.el6_2.1 base
krb5-appl-servers.x86_64 1.0.1-7.el6_2.1 base
krb5-auth-dialog.x86_64 0.13-3.el6 base
krb5-devel.i686 1.10.3-10.el6_4.3 updates
krb5-libs.i686 1.10.3-10.el6_4.3 updates
krb5-pkinit-openssl.x86_64 1.10.3-10.el6_4.3 updates
krb5-server.x86_64 1.10.3-10.el6_4.3 updates
krb5-server-ldap.i686 1.10.3-10.el6_4.3 updates
krb5-server-ldap.x86_64 1.10.3-10.el6_4.3 updates
krb5-workstation.x86_64 1.10.3-10.el6_4.3 updates
pam_krb5.i686 2.3.11-9.el6 base
pam_krb5.x86_64 2.3.11-9.el6 base
python-krbV.x86_64 1.0.90-3.el6 base
root-net-krb5.x86_64 5.28.00h-3.el6 kloxo-mr-epel
samba-winbind-krb5-locator.x86_64 3.6.9-151.el6 base
samba4-winbind-krb5-locator.x86_64 4.0.0-55.el6.rc4 base
-
Run files already change since .21/.22 and then become:
pop3:
#!/bin/sh
PASSPROG="/home/vpopmail/bin/vchkpw"
HOSTNAME=`hostname --fqdn`
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=110
exec /usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -c 200 $IP $PORT
/var/qmail/bin/qmail-popup $HOSTNAME
$PASSPROG /var/qmail/bin/qmail-pop3d Maildir 2>&1
pop3-ssl:
#!/bin/sh
HOSTNAME=`hostname --fqdn`
rm -rf "./env/*";
cat /etc/courier/pop3d-ssl | /usr/bin/envconv
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="48000000"
else
SOFTLIMITVAR="9000000"
fi
IP=0
PORT=995
exec /usr/bin/envdir ./env/
/usr/bin/softlimit -m $SOFTLIMITVAR
/usr/bin/tcpserver -v -R -H -l $HOSTNAME $IP $PORT
/usr/bin/couriertls -server -tcpd
/usr/sbin/pop3login
/usr/bin/pop3d Maildir 2>&1
Mustafa is still the same error:
* Account 'Administracja': Connecting to POP3 server: mail.yyyyyy.pl...
[22:32:26] POP3< +OK <1106.1371328346@aaaaa.bbbb.pl>
[22:32:26] POP3> USER yyy@yyyyyy.pl
[22:32:26] POP3< +OK
[22:32:26] POP3> PASS ********
[22:32:26] POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
*** B??d podczas przetwarzania wiadomo?ci.
-
Try:
chown root:root /home/vpopmail/bin/vchkpw
chmod 4755 /home/vpopmail/bin/vchkpw
-
Try:
chown root:root /home/vpopmail/bin/vchkpw
chmod 4755 /home/vpopmail/bin/vchkpw
Mustafa is still the same error.
-
Truly, no different between previous qmail-toaster with latest one except different run script.
Sadly, I didn't test fpr pop3 but imap. After update, I didn't found any issues related to mail.
I am not sure reboot will be fix your issue.
-
Truly, no different between previous qmail-toaster with latest one except different run script.
Sadly, I didn't test fpr pop3 but imap. After update, I didn't found any issues related to mail.
I am not sure reboot will be fix your issue.
Mustafa did reboot and it does not help or sh/script/fixmail-all.
-
I am not reboot my servers after update. But, qmail have weird behaviour for start/stop/restart after change their run script.
-
I am not reboot my servers after update. But, qmail have weird behaviour for start/stop/restart after change their run script.
Mustafa does not help. Somewhere you made a mistake in the updates. The .20 was OK.
I'm going back to 20 and block the updates Kloxo-MR because the server will again four days offline as recently as one day online.
-
I just better not do updates because every update is full of bugs and the server is still offline.
Stable versions should be free of errors.
-
Error you have any of these packages:
Dependency Installed:
MariaDB-shared.x86_64 0:10.0.3-1
Updated:
courier-imap-toaster.x86_64 0:4.1.2-1.3.12.mr.el6
krb5-devel.x86_64 0:1.10.3-10.el6_4.3
krb5-libs.x86_64 0:1.10.3-10.el6_4.3
lxphp.x86_64 0:5.2.17-9.mr.el6
python27-distribute.noarch 0:0.6.44-1.ius.el6
qmail-pop3d-toaster.x86_64 0:1.03-1.3.24.mr.el6
qmail-toaster.x86_64 0:1.03-1.3.24.mr.el6
vpopmail-toaster.x86_64 0:5.4.33-1.4.2.mr.el6Blocked the update kloxo and was updating only those packages and is the same deviation as described here.
-
No, it's not Kloxo-MR issue but something wrong with mysql/mariadb from centalt and mariadb repo. It's consequency where Kloxo-MR using external repo.
-
No, it's not Kloxo-MR issue but something wrong with mysql/mariadb from centalt and mariadb repo. It's consequency where Kloxo-MR using external repo.
Mustafa error you get in this package:
vpopmail-toaster.x86_64 0:5.4.33-1.4.2.mr.el6Other packages installed and it was OK.
-
Sorry what's error for this file. Maybe related to mysqlclient16.rpm.
Try 'yum install mysqlclient16.rpm' before update.
-
Sorry what's error for this file. Maybe related to mysqlclient16.rpm.
Try 'yum install mysqlclient16.rpm' before update.
Mustafa error is in this file:
vpopmail-toaster.x86_64 0:5.4.33-1.4.2.mr.el6I did a full update without it and everything works OK.
-
Sorry what's error for this file. Maybe related to mysqlclient16.rpm.
Try 'yum install mysqlclient16.rpm' before update.
Mustafa error is in this file:
vpopmail-toaster.x86_64 0:5.4.33-1.4.2.mr.el6I did a full update without it and everything works OK.
Sorry, I mean 'yum install mysqlclient16'.
For latest update, vpopmail only little bit code changed. It's not very importance to update except qmail and courier-imap.
-
Many issue related to mysql update. Many repos not include mysqclient for their latest mysql update. Mariadb have the same issue.
-
Sorry what's error for this file. Maybe related to mysqlclient16.rpm.
Try 'yum install mysqlclient16.rpm' before update.
No package mysqlclient16.rpm available.
yum list mysqlclient16*
Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
* base: merlin.fit.vutbr.cz
* extras: mirror.hosting90.cz
* kloxo-mr-epel: mirror.nl.leaseweb.net
* kloxo-mr-ius: ftp.rediris.es
* kloxo-mr-ius-c5: ftp.rediris.es
* updates: merlin.fit.vutbr.cz
0 packages excluded due to repository protections
Installed Packages
mysqlclient16.x86_64 5.1.61-1.ius.el6 @kloxo-mr-ius
Available Packages
mysqlclient16-debuginfo.x86_64 5.1.61-1.ius.el6 kloxo-mr-ius
mysqlclient16-devel.x86_64 5.1.61-1.ius.el6 kloxo-mr-ius
-
Even if you arrange a 'yum list mysqlclient16*' and will install everything is still the same error.
The best solution is to dispense with the update, and will remain for the resolution of version .20.
-
mysqlclient16 already installed on your server.
What error appear when update vpopmail?.
-
What appear when running 'yum update vpopmail-toaster'?.
-
mysqlclient16 already installed on your server.
What error appear when update vpopmail?.
The same as I said above:
POP3< /home/vpopmail/bin/vchkpw: error while loading shared libraries: libkrb5support.so.0: failed to map segment from shared object: Cannot allocate memory
-
This error when running 'yum update vpopmail-toaster'?.
-
This error when running 'yum update vpopmail-toaster'?.
Mustafa yet still write that this is a problem after upgrading to the latest version. So to vpopmail-toaster.x86_64 0:5.4.33-1.4.2. Mr.el6.
The version vpopmail-toaster.x86_64.5.4.33-1.4.1.mr.el6 working properly.
-
You said before have a problem with vpopmail-toaster.
Vpopmail just interface to login process. Pop3 and Imap handle by courier. Smtp handle by qmail.
So, your issue related to courier instead vpopmail or qmail.
So try increasing SOFTLIMITVAR inside /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run to:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
Many reference advice increase softlimit from 9000000 to 48000000 for centos 64bit but this advice relate to centos 5. Maybe Centos 6 need more.
That it
-
You said before have a problem with vpopmail-toaster.
Vpopmail just interface to login process. Pop3 and Imap handle by courier. Smtp handle by qmail.
So, your issue related to courier instead vpopmail or qmail.
So try increasing SOFTLIMITVAR inside /var/qmail/supervise/pop3/run and /var/qmail/supervise/pop3-ssl/run to:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
Many reference advice increase softlimit from 9000000 to 48000000 for centos 64bit but this advice relate to centos 5. Maybe Centos 6 need more.
That it
Now it works. It's OK. Change in the installer on the size.
And it must be installed:
Installed Packages
vpopmail-toaster.x86_64.5.4.33-1.4.2.mr.el6 @ kloxo-mr-release-version-arch
-
So, /var/qmail/supervise/pop3/run became:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fior different value?.
-
So, /var/qmail/supervise/pop3/run became:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fior different value?.
I typed in the run pop3 and pop3-ssl as written. Do you have more or less do not know I did not check. I can only write a check which values ??have to check.
-
Mustafa is a problem with sending emails:
535 authentication failed (# 5.7.1)
You can not send emails.
-
Running 'sh /script/fixmail-all; sh /script/restart-services'. If not work, increase SOFTLIMITVAR around 30% inside /var/qmail/supervise/smtp/run, /var/qmail/supervise/smtp-ssl/run and /var/qmail/supervise/submission/run and then also running restart-services.
-
Inform here your original and new value of SOFTLIMITVAR.
-
Inform here your original and new value of SOFTLIMITVAR.
Mustafa value stmp and stmp-ssl are:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="64000000"
fisubmission
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="20000000"
fiSo what give value?
-
Mustafa doing a really good job, but unfortunately this version is not suitable for the stable version.
All vpopmail-toaster in 64 bit is unusable. She returned to the old version of vpopmail-toaster and everything works fine. The latest version of which was spent not suitable for stable version. It should be marked as a beta version is not stable. Just not suitable for the stable version because it has errors.
Mustafa should do tests before you release a stable version because users have a right to expect a well-functioning product and not to spend countless hours searching for the more bugs that never run a meaningful description of the progress of work and what you changed and where. The more that do not need to be familiar with this because kloxo is described as a product that is easy to install and use.
Mustafa ahead if you plan to release the next version of the first test version i do check that there are partition with works correctly and write, it is a trial version and you need to test it, it's probably a lot of us will be there to test.
Regards and about you shut until you fix errors vpopmail-toaster and will be the new version, but without the error.
-
It's work in my servers.
Use submission (port 587; unsecure; no tls/ssl).
-
It's work in my servers.
Use submission (port 587; unsecure; no tls/ssl).
Mustafa is nowhere to be found in the web of the new and old vpopmail-toaster to compare what changed in vpopmail-toaster.
Just because you work does not mean that others have to work. You always works, and look at how many people here says that they did not work a lot of things.
Love the new version of vpopmail-toaster does not work and I can not compare the two versions I have not found the two of them.
-
It's work in my servers.
Use submission (port 587; unsecure; no tls/ssl).
Mustafa is nowhere to be found in the web of the new and old vpopmail-toaster to compare what changed in vpopmail-toaster.
Just because you work does not mean that others have to work. You always works, and look at how many people here says that they did not work a lot of things.
Love the new version of vpopmail-toaster does not work and I can not compare the two versions I have not found the two of them.
Different thing mostly related to run content. You can inverstigate the content of /var/qmail/supervise/smtp/run, /supervise/smtp-ssl/run and /var/qmail/supervise/submission/run especially on:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
and:
export SMTPAUTH=""
SSL=0
REQUIRE_AUTH=0
FORCE_TLS=0
DENY_TLS=0
AUTH=1
REQUIRE_AUTH=0
ALLOW_INSECURE_AUTH=1
For Centos 6 (like pop3 issue), softlimit maybe not enough. Need increase.
-
It's work in my servers.
Use submission (port 587; unsecure; no tls/ssl).
Mustafa is nowhere to be found in the web of the new and old vpopmail-toaster to compare what changed in vpopmail-toaster.
Just because you work does not mean that others have to work. You always works, and look at how many people here says that they did not work a lot of things.
Love the new version of vpopmail-toaster does not work and I can not compare the two versions I have not found the two of them.
Different thing mostly related to run content. You can inverstigate the content of /var/qmail/supervise/smtp/run, /supervise/smtp-ssl/run and /var/qmail/supervise/submission/run especially on:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
and:
export SMTPAUTH=""
SSL=0
REQUIRE_AUTH=0
FORCE_TLS=0
DENY_TLS=0
AUTH=1
REQUIRE_AUTH=0
ALLOW_INSECURE_AUTH=1
For Centos 6 (like pop3 issue), softlimit maybe not enough. Need increase.
Mustafa yesterday increased the limit for these three files you have written and unfortunately did not work by increasing the limits of e-mails. The new version of vpopmail-toaster is underdeveloped and is not suitable for use and never found the old nor the new vpopmail-toaster to download and look for errors. Besides the stable errors are not acceptable. Once these are beta and alpha.
-
Old run file just no exist of:
export SMTPAUTH=""
SSL=0
REQUIRE_AUTH=0
FORCE_TLS=0
DENY_TLS=0
AUTH=1
REQUIRE_AUTH=0
ALLOW_INSECURE_AUTH=1
-
Old run file just no exist of:export SMTPAUTH=""
SSL=0
REQUIRE_AUTH=0
FORCE_TLS=0
DENY_TLS=0
AUTH=1
REQUIRE_AUTH=0
ALLOW_INSECURE_AUTH=1
This file is STMP from the previous version and it works well:
(http://www.zimagez.com/miniature/przechwycenieobrazuekranu-17062013-194540.php) (http://www.zimagez.com/zimage/przechwycenieobrazuekranu-17062013-194540.php)
-
So, your previous is the same as the latest one. You can copy previous run script.
For restart qmail, 'qmailctl restart' not the same logic between 'qmailctl stop' + 'qmailctl start'. For this 'true' restart better using 'qmailctl stop' and then 'qmailctl start'
Logic for:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
are:
- if script detect your OS is 64bit, then use '64000000' as SOFTLIMITVAR
- if no 64bit, then use '9000000'.
In early Kloxo-MR, SOFTLIMITVAR as the same for 32bit and 64bit. Value set to '64000000'.
-
So, your previous is the same as the latest one. You can copy previous run script.
For restart qmail, 'qmailctl restart' not the same logic between 'qmailctl stop' + 'qmailctl start'. For this 'true' restart better using 'qmailctl stop' and then 'qmailctl start'
Logic for:
if [ `uname -m` = 'x86_64' ] ; then
SOFTLIMITVAR="64000000"
else
SOFTLIMITVAR="9000000"
fi
are:
- if script detect your OS is 64bit, then use '64000000' as SOFTLIMITVAR
- if no 64bit, then use '9000000'.
In early Kloxo-MR, SOFTLIMITVAR as the same for 32bit and 64bit. Value set to '64000000'.
Mustafa new version of vpopmail-toaster simply malfunctioning. The previous version of vpopmail-toaster works fine and I'm using it now. I'm not going to experiment because friends are upset that the servers were online and one day after the last update they had five days offline I have released an update with error vpopmail-toaster. That's not why people pay for servers to take them offline because you still stable release an update with errors that uniemo?liwij? correct operation of servers. I also do not pay for the server to have it still offline because with every update errors. With the next update, return to the previous version of vpopmail-toaster or Let the new version but a properly working.
If you want to catch the errors that give up at home with the use of Windows and install Linux yourself to some he'll be all caught a malfunction.
Vpopmail-toaster.x86_64.5.4.33-1.4.1.mr.el6 is OK. The new version is bad.