MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: seymour on 2016-08-05, 03:16:56
-
Hello I got a server of centos 5x with kloxo and I want to know if I can upgrade my kloxo from 32 bits to 64 without harming the functionality of my kloxo panel and my server html area files?
And now you went and disfigured all kloxo installation rpms so if we keep on using 32 bits it will be harder than hard ,now the question is if I upgrade to your new MR will it be a working panel,many issues all is diferent with RAMADAN truly loves to recapture and re invent himself my god
How do upgrade to MR From old 32 bits,whith this?
cd /script
y despues:
./upcp
What precations should I take,is it worth the risk,will it be 64 bit?
-
Upgrade with:
1. Backup data using 'backup/restore' feature under 'admin' to other server via ftp
2. Or download backup file via 'download' from '/home/kloxo/client/admin/__backup' to your local pc
3. Reinstall OS with Centos 6 64bit and install Kloxo-MR 7.0
4. Copy back backup data to '/home/kloxo/client/admin/__backup'
5. Restore data using 'backup/restore' feature
-
Do you mean first MR works at 64,so MR can restore files from old 32 bit kloxo? without harm?
Well first thanks for the backup thing instance but my main concern it was weather or not my 32 bit stuff would work well on MR
And does this work,funciona?
cd /script
./upcp
-
64bit run faster than 32bit but using higher RAM (around 15%). If you have more than 512MB RAM, better using 64bit.
-
I could install Kloxo MR successfully I even got the apache message that the server was well configured and I just needed to upload files,so I went to restore backup but it didnt work without restoring admin,so I went to restore admin as well and I got 500 error
and I figured out it was php or something relating with permissions,I also got this
php54-common-5.4.45-1.ius.el5.i386 from installed has depsolving problem
bash: php54-common-5.4.45-1.ius.el5.i386: command not found
php54-cli-5.4.45-1.ius.el5.i386 from installed has depsolving problems
--> php54 conflicts with php
bash: php54-cli-5.4.45-1.ius.el5.i386: command not found
Error: php54-common conflicts with php-common
Error: php54-common conflicts with php-common
Error: php54 conflicts with php
Error 500 - Internal Server Error
A generic error message, given when no more specific message is suitable
I am wearing CentOS 5.11 and dont want to think that it is that the os I had when backing up was centos 5.5 so still I dont want to upgrade the os version and Im trying stuff like
yum clean all and other stuff before I go to that please if there is something you can do to help it will be gracefully appreciated
-
Inform here 'sh /script/sysinfo; uname -m; cat /etc/*release'.
-
whats that for
-
Information about your server.
-
We are currently on centos 5.11 the backup files were made on centos 5.5,actually kloxo MR is working fine on configuration even if I restored older admin with arrow still httpd configuration proper apache is right since index html shows up well but is not the same with index php it shows 500 error first I did
Excluding Packages from MRatWork - Extra Packages for EL 5 - arch
Finished
Excluding Packages from MRatWork - IUS Community Packages for EL 5 (archive) - arch
Finished
Excluding Packages from MRatWork - IUS Community Packages for EL 5 (stable) - arch
Finished
Excluding Packages from MRatWork - Webtatic for CentOS 5 - i386
Finished
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package php.i386 0:5.1.6-45.el5_11 set to be updated
--> Processing Dependency: php-cli = 5.1.6-45.el5_11 for package: php
--> Processing Dependency: php-common = 5.1.6-45.el5_11 for package: php
--> Running transaction check
---> Package php-cli.i386 0:5.1.6-45.el5_11 set to be updated
---> Package php-common.i386 0:5.1.6-45.el5_11 set to be updated
--> Processing Conflict: php54-common conflicts php-common < 5.4
--> Processing Conflict: php54-cli conflicts php-cli < 5.4
--> Processing Conflict: php54 conflicts php < 5.4
--> Processing Conflict: php54-pspell conflicts php-pspell < 5.4
--> Finished Dependency Resolution
php54-pspell-5.4.45-1.ius.el5.i386 from installed has depsolving problems
--> php54-pspell conflicts with php-common
php54-common-5.4.45-1.ius.el5.i386 from installed has depsolving problems
--> php54-common conflicts with php-common
php54-5.4.45-1.ius.el5.i386 from installed has depsolving problems
--> php54 conflicts with php
php54-cli-5.4.45-1.ius.el5.i386 from installed has depsolving problems
--> php54-cli conflicts with php-cli
Error: php54-common conflicts with php-common
Error: php54-cli conflicts with php-cli
Error: php54 conflicts with php
Error: php54-pspell conflicts with php-common
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
Total 4.6 MB/s | 4.6 MB 00:00
Did remove repos protections and removed php54 then I installed php again
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : php-common 1/3
Installing : php-cli 2/3
Installing : php 3/3
Installed:
php.i386 0:5.1.6-45.el5_11
Dependency Installed:
php-cli.i386 0:5.1.6-45.el5_11 php-common.i386 0:5.1.6-45.el5_11
Still my index php dont show still 500 error thanks for reading me
-
It's about conflict between php packages. Inform here 'dir -l /etc/yum.repos.d'.
-
Yes is php problem maybe due to the fact that old kloxo wore php5 ,is there something I should do on that file to solve this?,or do I just use as a command to give you output?
However heres output of that command you provided in a lovely way
total 68
-rw-r--r-- 1 root root 1926 Sep 19 2014 CentOS-Base.repo
-rw-r--r-- 1 root root 645 Sep 19 2014 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root 277 Sep 19 2014 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 626 Sep 19 2014 CentOS-Media.repo
-rw-r--r-- 1 root root 1330 Sep 19 2014 CentOS-Sources.repo
-rw-r--r-- 1 root root 8315 Sep 19 2014 CentOS-Vault.repo
-rw-r--r-- 1 root root 954 Aug 11 2010 epel.repo
-rw-r--r-- 1 root root 1054 Aug 11 2010 epel-testing.repo
-rw-r--r-- 1 root root 9802 Dec 10 09:35 mratwork.repo
-rw-r--r-- 1 root root 9241 Dec 2 02:17 mratwork.repo.rpmsave
-rw-r--r-- 1 root root 2298 Mar 1 2014 remi.repo
-
Rename epel.repo to epel.nonrepo, epel-testing.repo to epel-testing.nonrepo and remi.repo to remi.nonrepo. And then 'yum clean all; yum update'.
-
Already done that plus restarting kloxo and apache and still get 500 error on my index.php,also
did sh /script/cleanup
and got
Stopping php-fpm (PHP Used): [FAILED]
Starting php-fpm (PHP Used): /bin/bash: php-fpm: command not found
[FAILED]
Still it is very present a php failure issue ,thank you for reading
-
Try 'yum replace php --replace-with=php54'. It's because your server using php instead php54.
-
I did this still 500 error on my index.php
Stopping kloxo-phpcgi: [ OK ]
Starting kloxo-phpcgi ('php54s' in 'fpm' mode): [ OK ]
Stopping kloxo-hiawatha: [ OK ]
Starting kloxo-hiawatha: [ OK ]
Stopping php-fpm (PHP Used): [FAILED]
Starting php-fpm (PHP Used): /bin/bash: php-fpm: command not found
[FAILED]
Hey does this php-fpm thing mean kloxo dont use apache anymore and use ngix instead look here is the guide I used to install kloxoMR
I guess
http://www.servermom.org/install-kloxo-mr-centos-vps/
Hey Ramadan is there a way to get an installation download to old kloxo ,why was it removed the download link?
Thank you plenty
-
Again, inform here 'sh /script/sysinfo'.
-
Just another monopoly
-
just another monopoly
-
Hai, I want to know your 'sh /script/sysinfo' because need to know php installed in your system. By default, Kloxo-MR 7 using php54 branch. But, in your server, update to php54 may conflict with php branch. It's weird. That it.
-
hello sir,
pls sorry i have to post here but i didn't know where to start my question.
pls i am trying to install a LOGIN PLUGIN on a website.the settings is requesting that i imput the following....this is what it says...
( Use GET-parameter to show the login form ) - ( If it's filled, then by logging without GET parameter the Login Form will not showing to user. Use some string as GET parameter. Example: showmeform )
i have done many things but the form will still not show up. pls what exactly must i write there to make the form show up....? i attach a screen shot for your reference. thank you
Emmanuel
-
hello sir,
pls sorry i have to post here but i didn't know where to start my question.
pls i am trying to install a LOGIN PLUGIN on a website.the settings is requesting that i imput the following....this is what it says...
( Use GET-parameter to show the login form ) - ( If it's filled, then by logging without GET parameter the Login Form will not showing to user. Use some string as GET parameter. Example: showmeform )
i have done many things but the form will still not show up. pls what exactly must i write there to make the form show up....? i attach a screen shot for your reference. thank you
Emmanuel
What's application you use?.
-
i am using this plug in call "Login Form"
-
i am using this plug in call "Login Form"
What's application use it?. Wordpress?.
-
yes please..i am using WORDPRESS
-
So many wordpress plugins for login form. Which plugins do you mean?.
-
pls the plugin is called LOG IN FORM by www.wpadm.com .i attached a snap shot for ur reference.thank you
Emmanuel
-
I don't know this plugins. I always using wordfence for wordpress security.
-
ok...can u recommend any plug in for me ? i want to create an independent log in form that will redirect the subscriber to a specific page after logging in....pls
-
ok...can u recommend any plug in for me ? i want to create an independent log in form that will redirect the subscriber to a specific page after logging in....pls
Try it.
-
try what pls ?
-
Try using wordfence plugins in wordpress.
-
ok...thanks....am trying it now..will feed u back....thanks
-
pls i couldnt find any option in the wordfence settings to REDIRECT LOGERS TO A SPECIFIC URL ?
-
pls i couldnt find any option in the wordfence settings to REDIRECT LOGERS TO A SPECIFIC URL ?
No options for this.
The purpose for wordfence is make wordprss more secure like block IP if fail login in certain times.
-
Plateform:
- OS: CentOS release 5.11 (Final) i686
Services:
1. MySQL: MariaDB-server-10.0.28-1
2. PHP:
- Installed:
- Branch: php54-cli-5.4.45-1.ius.centos5
- Used: --PHP Branch--
- Multiple: disable
3. Web Used: apache
- Hiawatha: hiawatha-10.4.0-f.1.mr.el5
- Lighttpd: lighttpd-1.4.39-3.el5
- Nginx: nginx-1.11.7-1.el5.ngx
- Apache: httpd-2.2.31-1.mr.el5
- PHP Type: php-fpm_event
- Secondary PHP: off
4. WebCache: none
- ATS: --uninstalled--
- Squid: --uninstalled--
- Varnish: --uninstalled--
5. Dns: bind
- Bind: bind-9.9.7-1.mr.el5
- DJBDns: --uninstalled--
- NSD: --uninstalled--
- PowerDNS: --uninstalled--
- Yadifa: --uninstalled--
6. Mail: qmail-toaster-1.03-1.3.55.mr.el5
- pop3/imap4: none
- smtp: none
- spam: bogofilter-1.2.4-1.el5
7. Stats: awstats
Memory:
total used free shared buffers cached
Mem: 1024 311 712 0 0 150
-/+ buffers/cache: 160 863
Swap: 1024 63 960
Stopping php-fpm (PHP Used): [FAILED]
Starting php-fpm (PHP Used): /bin/bash: php-fpm: command not found
[FAILED]
some flies ,files some config aint right still 500 error with php you configured ngix against apache some weird stuff you did Ramadan I dont know what to think of you it was so easy to restore backups you went and made it harder
-
Go to 'admin > webserver configure' and then all install all php in 'multiple php install'. You can refresh page until you see all 'multiple php' installed. After that, choose 'php54m' (instead 'php branch') in 'php used'. It's will be fix your issue.
-
Hello did that and my server respond like this
Stopping kloxo-phpcgi: [ OK ]
Starting kloxo-phpcgi ('php54s' in 'fpm' mode): [ OK ]
Stopping kloxo-hiawatha: [ OK ]
Starting kloxo-hiawatha:
Stopping php54m-fpm (PHP Used): [ OK ]
Starting php54m-fpm (PHP Used): [ OK ]
on webserver configuration I have got this
PHP Used
php54m
PHP Branch
php54_(as_5.4.45)
Multiple PHP Already Installed
php54m
PHP Type
php-fpm_event
unliked the enable multiple php since it disables apache
Apache Memory Optimize
default
MySQL Convert (Select To Execute)
not selected
MySQL Charset (Select To Execute)
not selected
Fix 'ownership' And 'permissions' (Select To Execute)
not selected
Pagespeed Cache (if Used)
not selected
PHP-fpm Type
static
The error on my index.php sorta changed but still gives at times error 500 but mostly this
Could not connect: Can't connect to MySQL server on 'xx.xxx.xxx.xx' (4)
Unable to connect to database server!
thanks for reading
-
Choose medium or high for 'apache optimize'. Run 'sh /script/fix-chownchmod' for fix permissions and ownership of website's files/directories.
For 'mysql connect', enable 'mysql' and then restart in 'php module status'.
-
Did the permissions thing hope it didnt allow all my files to be writted
also the apache medium and in
php module status I restarted mysql but didnt know where to find mysql connect ,whats the path,still get the same error of mysql cant connect thank you very much for reading me
-
Inform here 'php -m; php54m-cli -m; yum list|grep mysqlclient'.
-
[PHP Modules]
bz2
calendar
Core
ctype
curl
date
dom
ereg
exif
fileinfo
filter
ftp
gettext
gmp
hash
iconv
json
libxml
mhash
openssl
pcntl
pcre
Phar
posix
pspell
readline
Reflection
session
shmop
SimpleXML
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tokenizer
wddx
xml
xmlreader
xmlwriter
xsl
zip
zlib
[Zend Modules]
[PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dom
ereg
exif
fileinfo
filter
ftp
gd
geoip
gettext
gmp
hash
iconv
imap
intl
json
ldap
libxml
mbstring
mcrypt
mhash
mysql
mysqli
mysqlnd
mysqlnd_ms
openssl
pcntl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
pspell
readline
recode
Reflection
session
shmop
SimpleXML
snmp
soap
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tidy
tokenizer
uploadprogress
xml
xmlreader
xmlrpc
xmlwriter
xsl
zip
zlib
[Zend Modules]
mysqlclient15.i386 5.0.92-3.ius.el5 installed
libmysqlclient15.i386 5.0.95-5.w5 mratwork-webtatic
libmysqlclient15-devel.i386 5.0.95-5.w5 mratwork-webtatic
libmysqlclient16.i386 5.1.69-1.w5 mratwork-webtatic
libmysqlclient16-devel.i386 5.1.69-1.w5 mratwork-webtatic
mysqlclient15-debuginfo.i386 5.0.92-3.ius.el5 mratwork-ius-stable
mysqlclient15-devel.i386 5.0.92-3.ius.el5 mratwork-ius-stable
The permissions thing made me not finding my site on my home folder on html area you blew me away Ramadan Im not there anymore ,can you please provide a way to revert the permission thing please
-
It's not related to mysql but related to php-fpm. So 'sh /script/restart-web' instead 'sh /script/restart-mysql'.
Make sure you choose 'php54m' for 'php used' under 'webserver configure'.
-
You have to understand that changing permissions blew my site away cant enter via sftp to my files tell me hopw to recoup please
-
It is required Ramadan that you tell us this info please:
(Try to reply by numbrers)
1-Which version of php had the old kloxo
2-Which version of mysql or mysqld had old kloxo?
3-Which version of Apache had the old kloxo?
You have to understand Ramadan that we howsoever have no fear at all and you providing the required info will allow us to know you aint a terrorist.
-
I don't know about latest Kloxo official (aka version 6.1.19) but spec for version 6.1.12 are:
1. Using php 5.2
2. Using MySQL 5.0
3. Using Apache 2.2 (early version)
-
Is this info related to the old 32 bit kloxo download that used to be on lxcenter.org?
-
Maybe yes. Inform here 'dir -l /etc/yum.repos.d'.
-
Why maybe I need that info and the fact that you provide me with a link to the old kloxo download please Ramadan
-
LxCenter already down now. So, no access to their repo. That mean 'say good bye to them'.
-
I want that you give me here the download I would get there of old kloxo whats your fear so yousay you aint terrorist or you say maybe ur shy or what to say ur terrorist Ramadan prove it you aint with facts and put the old kloxo 32 bit download somewhere I can download it and give me the address or are you being ridiculous Ramadan or silly Ramadan you dont know that you can find ubuntu in many distros old and new why you shouldnt do the same,why you shouldnt provide old distro of old 32 bit kloxo_?
-
This is Kloxo official source: https://github.com/lxcenter/kloxo
-
Is that old kloxo 32 bit?,if so please give me a guide in order to install it via ssh appreciate ur effort Ramadan but it still feels ur playin round
-
Why you ask to me about install Kloxo official. It's wrong 'room'.
Ask to https://github.com/dterweij.
-
The one wrong its you Ramadan you prohibit user access to old versions of
your freaking inventions and then your new inventions do have nothing but
configuration huge damages for not saying that they truly suck not saying you suck
as inventor but maybe you preach that your new invention kloxo mr can restore
old 32 bit kloxo files and is not true it sucks it has deep configuration
problems that are so hard to fix because either one of 2 your a terrorist that
loves to tear apart peoples lives or you are the worst inventor that uses the
internet
-
The one wrong its you Ramadan you prohibit user access to old versions of
your freaking inventions and then your new inventions do have nothing but
configuration huge damages for not saying that they truly suck not saying you suck
as inventor but maybe you preach that your new invention kloxo mr can restore
old 32 bit kloxo files and is not true it sucks it has deep configuration
problems that are so hard to fix because either one of 2 your a terrorist that
loves to tear apart peoples lives or you are the worst inventor that uses the
internet
Again, You are wrong. No reason to me to 'prohibit' to Kloxo official (manage by NOT me).
That it enough.
Just simple answer: 'use Kloxo-MR or leave it'. And don't ask to 'how to' Kloxo official.
-
That thang is freaking dead there is nothing there,then I use kloxomr and then you throw to me those command that blow my site away ,why you mess with permissions if things go wrong you are careless and you say you aint terrorist
-
That thang is freaking dead there is nothing there,then I use kloxomr and then you throw to me those command that blow my site away ,why you mess with permissions if things go wrong you are careless and you say you aint terrorist
It's not Kloxo-MR but something wrong with you experience.
That it.
-
Then you are a good inventor or bad inventor-Ramadan?
-
Then you are a good inventor or bad inventor?
I didn't understand what's you talking.
The problem is you don't want give informations where this informations give me directions related to your issues.
-
My expirience tells me is bad invention Ramadan since its configuration failures are hard to beat ,if you had expirience you wouldnt have realeased kloxo MR until it ran off its inadequacies ,it needed tons of testing tons of il behaviours that dont make it compatible with kloxo official,then you say kloxo official had php 5.2?
-
My expirience tells me is bad invention Ramadan since its configuration failures are hard to beat ,if you had expirience you wouldnt have realeased kloxo MR until it ran off its inadequacies ,it needed tons of testing tons of il behaviours that dont make it compatible with kloxo official,then you say kloxo official had php 5.2?
Again, what's you talking about 'invention'?.
Example, you didn't inform resulf of 'dir -l /etc/yum.repos.d'. You just inform 'Did the permissions thing hope it didnt allow all my files to be writted' without detail/deep informations. So, how I can help you with too much 'hidden' informations?.
-
You first had to give me the command in order to restore my permissions the way they was,you went and attacked my site to be kloxo mr authorative.
Your stoff mr needs more development really you suck like inventor Ramadan on server configuration you can not set php 52 since it allows on all php just php 53,54, and 55 and I guess this is the problem that my site was using php5.2 from kloxo official or correct if this wasnt the php it had,in other words when you try to set php 52 it blows away apache and it all becomes head over heels,you are using me ramadan to test this creep piece of software it just dont come over stood it fails,you are missing development so all php might be compatible with kloxo official ,its nightmare kloxo MR burden out of control,all php should allow each other in automatic way,this requires to much patience and testing and then one sorts this and in the future you come up with a la ramadan new inventions that we have to sort out again I give up on you mr terrorist, I dont need your madness neither Im afraid of it.
-
You first had to give me the command in order to restore my permissions the way they was,you went and attacked my site to be kloxo mr authorative.
Your stoff mr needs more development really you suck like inventor Ramadan on server configuration you can not set php 52 since it allows on all php just php 53,54, and 55 and I guess this is the problem that my site was using php5.2 from kloxo official or correct if this wasnt the php it had,in other words when you try to set php 52 it blows away apache and it all becomes head over heels,you are using me ramadan to test this creep piece of software it just dont come over stood it fails,you are missing development so all php might be compatible with kloxo official ,its nightmare kloxo MR burden out of control,all php should allow each other in automatic way,this requires to much patience and testing and then one sorts this and in the future you come up with a la ramadan new inventions that we have to sort out again I give up on you mr terrorist, I dont need your madness neither Im afraid of it.
No context. Still not want to inform more related your issue.
-
*bLack MaGIk php in kloxo mr dont convert to 5.2.17 simply because is intended yar freakin attitude
from hElL and beyond ramadan you disabled compatibility in order for your terrorist duties from hell
kloxo 32 bit or known as old kloxo or kloxo official not compatible with kloxo mr simply ramadan boicot.
BOICOT FROM HELL.