MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: Trust35 on 2017-05-09, 17:11:01
-
Hi!
I have a vps with Kloxo and 1 ipv4 and 122 ipv6.
Is it possible to use these ipv6 for email sending? Now i use ipv4.
Thank you!
-
Not testing it. But, try delete 'A record' (IPv4) for mail and then add 'AAA record' (IPv6) for mail.
-
Hi!
I delete mail.mydomain.com ip4 and add mail.mydomain.com aaa record with ipv6?
Thank you very much!
P.s. For sure: my ipv6 is this 2a05:7cc0:0:185:80:130:129:0 ?
-
Better ask to your provider to know how setup/enable IPv6 and what's usage IPs.
-
They says that the ipv6 are enabled and for Kloxo configuration to ask you. :)
-
Before used, better try to ping from other server or home pc to each IPv6.
And you can find out active IPs with 'ifconfig' and 'ip addr'.
-
Thnx.
But in
?
admin —
IP Addresses —
{IP Address}
i see only the ip4. Why?
-
Thnx.
But in
?
admin —
IP Addresses —
{IP Address}
i see only the ip4. Why?
Yes, Kloxo-MR still doesn't detect IPv6. So, that why I am asking to test your IPv6 via ping, ifconfig and ip addr.
-
Can you please pastebin the output of the command 'ifconfig' of your server?
Thnx.
But in
?
admin —
IP Addresses —
{IP Address}
i see only the ip4. Why?
-
How can i do this?
In Centos is not the comand ipconfig.
Thank you
-
Sorry, I mean 'ifconfig'.
-
Thnx.
In attach the screenshot.
-
Your IPv6 are 2a05:7cc0:0:185:80:130:129:0 - 2a05:7cc0:0:185:80:130:129:ffff (65535 IPs). You can use 2a05:7cc0:0:185:80:130:129:1 til 2a05:7cc0:0:185:80:130:129:fffe. To know IPv6 gateway, run 'ip -6 route show' or 'route -A inet6'.
-
Thnx
In attach the screenshot. Bit how can i add the ipv6 to Kloxo?
-
Hi!
Did you see the last screenshot? How is it?
-
You can choose :2 til :fffe for 'AAA record'.
-
Ok. But how can i insert the ipv6 in Kloxo?
In kloxo i see ony ip4.
Thank you very very much
-
Click 'Add AAA' in 'DNS settings'.
-
Ok.
LAST QUESTION;
how can i use ipv6 for email sending?
Now i insert in my software instead of smtp the ip4 of vps.
Thank you!
-
Ok.
LAST QUESTION;
how can i use ipv6 for email sending?
Now i insert in my software instead of smtp the ip4 of vps.
Thank you!
Depend on 'A record' (for IPv4) or 'AAA record' (for IPv6) for 'mail'
-
Hi!
I add AAA record in kloxo mail.mydomain.com with value ipv6 2a05:7cc0:0:185:80:130:129:ffff
If i use mail.mydomain.com instead of smtp in my software for email don't work.
If i use 2a05:7cc0:0:185:80:130:129:ffff instead of smtp,nothing happend.
I set the aaa record with the same value in my domain provider too.
Why?
-
Did you read my previous message ("You can choose :2 til :fffe for 'AAA record'.")?.
-
i will make a test with ipv6 only vps with socks to connect. leet me see how it works