Sponsor:

Server and Web Integrator
Link:
Kloxo-MR logo
6.5.0 or 7.0.0
Click for "How to install"
Donation/Sponsorship:
Kloxo-MR is open-source.
Donate and or Sponsorship always welcome.
Click to:
Click Here
Please login or register. 2024-03-28, 13:03:47

Author Topic: Installation Kloxo-mr in CentOS 7.2  (Read 7263 times)

0 Members and 1 Guest are viewing this topic.

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Installation Kloxo-mr in CentOS 7.2
« on: 2017-04-23, 19:08:49 »
How to install Kloxo-mr latest version in CentOS 7.2?
I have followed this instruction, but it is showing error - http://www.servermom.org/install-kloxo-mr-centos-vps/1832/

Can you please help?

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #1 on: 2017-04-23, 19:36:44 »
Only Kloxo-MR 7.0 ready for CentOS 7.x
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #2 on: 2017-04-23, 19:38:40 »
For how to install, see 'Click for "How to install"' top-left of this page (under Kloxo-MR logo).
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #3 on: 2017-04-24, 06:59:57 »
For how to install, see 'Click for "How to install"' top-left of this page (under Kloxo-MR logo).

I have followed your installation but still getting the error. Can you please help?
Please see the commands and error below. I have to delete some code from below, as the post has 20000 character limitation, but the commands and error are all show.

Code: [Select]
[root@scw-41674a ~]# cd /
[root@scw-41674a /]# yum update -y
Loaded plugins: fastestmirror
base                                                     | 3.6 kB     00:00
extras                                                   | 2.9 kB     00:00
updates                                                  | 2.9 kB     00:00
(1/4): base/7/armhfp/group_gz                              | 154 kB   00:00
(2/4): extras/7/armhfp/primary_db                          |  14 kB   00:00
(3/4): updates/7/armhfp/primary_db                         | 1.1 MB   00:00
(4/4): base/7/armhfp/primary_db                            | 3.0 MB   00:00
Determining fastest mirrors
Resolving Dependencies
--> Running transaction check
---> Package alsa-lib.armv7hl 0:1.0.28-2.el7 will be updated
---> Package alsa-lib.armv7hl 0:1.1.1-1.el7 will be an update
---> Package filesystem.armv7hl 0:3.2-21.el7 will be an update
---> Package firewalld.noarch 0:0.3.9-7.el7 will be updated
---> Package firewalld.noarch 0:0.4.3.2-8.1.el7_3.2 will be an update
--> Processing Dependency: python-firewall = 0.4.3.2-8.1.el7_3.2 for package: fi           rewalld-0.4.3.2-8.1.el7_3.2.noarch
--> Processing Dependency: firewalld-filesystem = 0.4.3.2-8.1.el7_3.2 for packag           e: firewalld-0.4.3.2-8.1.el7_3.2.noarch
--> Processing Dependency: ipset for package: firewalld-0.4.3.2-8.1.el7_3.2.noar           ch
---> Package glib2.armv7hl 0:2.42.2-5.el7 will be updated
---> Package glib2.armv7hl 0:2.46.2-4.el7 will be an update
---> Package yum-plugin-fastestmirror.noarch 0:1.1.31-25.el7_0 will be updated
---> Package yum-plugin-fastestmirror.noarch 0:1.1.31-40.el7 will be an update
---> Package zlib.armv7hl 0:1.2.7-15.el7 will be updated
---> Package zlib.armv7hl 0:1.2.7-17.el7 will be an update
--> Running transaction check
---> Package GeoIP.armv7hl 0:1.5.0-11.el7 will be installed
---> Package firewalld-filesystem.noarch 0:0.4.3.2-8.1.el7_3.2 will be installed
---> Package ipset.armv7hl 0:6.19-6.el7 will be installed
--> Processing Dependency: ipset-libs(armv7hl-32) = 6.19-6.el7 for package: ipse           t-6.19-6.el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_3.0) for package: ipset-6.19-6           .el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_2.0) for package: ipset-6.19-6           .el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_1.0) for package: ipset-6.19-6           .el7.armv7hl
--> Processing Dependency: libipset.so.3 for package: ipset-6.19-6.el7.armv7hl
---> Package pciutils.armv7hl 0:3.5.1-1.el7 will be installed
--> Processing Dependency: pciutils-libs = 3.5.1-1.el7 for package: pciutils-3.5           .1-1.el7.armv7hl
--> Processing Dependency: libpci.so.3 for package: pciutils-3.5.1-1.el7.armv7hl
--> Processing Dependency: hwdata for package: pciutils-3.5.1-1.el7.armv7hl
---> Package python-firewall.noarch 0:0.4.3.2-8.1.el7_3.2 will be installed
--> Running transaction check
---> Package hwdata.armv7hl 0:0.252-8.4.el7 will be installed
---> Package ipset-libs.armv7hl 0:6.19-6.el7 will be installed
---> Package pciutils-libs.armv7hl 0:3.5.1-1.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package                  Arch    Version                         Repository
                                                                           Size
================================================================================
Updating:
 alsa-lib                 armv7hl 1.1.1-1.el7                     base    372 k
 audit                    armv7hl 2.6.5-3.el7.1                   updates 215 k
 audit-libs               armv7hl 2.6.5-3.el7.1                   updates  77 k
ipset-libs               armv7hl 6.19-6.el7                      base     41 k
 pciutils                 armv7hl 3.5.1-1.el7                     base     88 k
 pciutils-libs            armv7hl 3.5.1-1.el7                     base     41 k
 python-firewall          noarch  0.4.3.2-8.1.el7_3.2             updates 301 k

Transaction Summary
================================================================================
Install               ( 8 Dependent packages)
Upgrade  148 Packages

Total download size: 101 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
warning: /var/cache/yum/armhfp/7/base/packages/GeoIP-1.5.0-11.el7.armv7hl.rpm: H           eader V4 RSA/SHA1 Signature, key ID 62505fe6: NOKEY
Public key for GeoIP-1.5.0-11.el7.armv7hl.rpm is not installed
(1/156): GeoIP-1.5.0-11.el7.armv7hl.rpm                    | 1.1 MB   00:00
(2/156): alsa-lib-1.1.1-1.el7.armv7hl.rpm                  | 372 kB   00:00
Public key for audit-2.6.5-3.el7.1.armv7hl.rpm is not installed
 (156/156): zlib-1.2.7-17.el7.armv7hl.rpm                   |  87 kB   00:00
--------------------------------------------------------------------------------
Total                                              5.3 MB/s | 101 MB  00:19
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
Importing GPG key 0x62505FE6:
 Userid     : "CentOS AltArch SIG - Arm32 (https://wiki.centos.org/SpecialIntere           stGroup/AltArch/Arm32) <security@centos.org>"
 Fingerprint: 4d9e 39f1 499c a21d d289 77f8 cafe f11b 6250 5fe6
 Package    : centos-userland-release-7-2.1511.el7.centos.0.4.armv7hl (@centos-b           ase_rbf)
 From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
warning: /var/cache/yum/armhfp/7/updates/packages/tzdata-2017b-1.el7.noarch.rpm:            Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32


The GPG keys listed for the "CentOS-7 - Updates" repository are already installe           d but they are not correct for this package.
Check that the correct key URLs are configured for this repository.


 Failing package is: tzdata-2017b-1.el7.noarch
 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltA           rch-Arm32

[root@scw-41674a /]# yum install yum-utils yum-priorities vim-minimal subversion            curl zip unzip -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package curl.armv7hl 0:7.29.0-25.el7 will be updated
---> Package curl.armv7hl 0:7.29.0-35.el7 will be an update
--> Processing Dependency: libcurl = 7.29.0-35.el7 for package: curl-7.29.0-35.e           l7.armv7hl
---> Package subversion.armv7hl 0:1.7.14-10.el7 will be installed
--> Processing Dependency: subversion-libs(armv7hl-32) = 1.7.14-10.el7 for packa           ge: subversion-1.7.14-10.el7.armv7hl
--> Processing Dependency: libsvn_wc-1.so.0 for package: subversion-1.7.14-10.el           7.armv7hl
--> Processing Dependency: libsvn_subr-1.so.0 for package: subversion-1.7.14-10.           el7.armv7hl
--> Processing Dependency: libsvn_repos-1.so.0 for package: subversion-1.7.14-10           .el7.armv7hl
--> Processing Dependency: libaprutil-1.so.0 for package: subversion-1.7.14-10.e           l7.armv7hl
--> Processing Dependency: libapr-1.so.0 for package: subversion-1.7.14-10.el7.a           rmv7hl
---> Package unzip.armv7hl 0:6.0-16.el7 will be installed
---> Package vim-minimal.armv7hl 2:7.4.160-1.el7 will be updated
---> Package vim-minimal.armv7hl 2:7.4.160-1.el7.1 will be an update
---> Package yum-plugin-priorities.noarch 0:1.1.31-40.el7 will be installed
---> Package yum-utils.noarch 0:1.1.31-40.el7 will be installed
--> Processing Dependency: yum >= 3.4.3-143 for package: yum-utils-1.1.31-40.el7           .noarch
--> Processing Dependency: python-kitchen for package: yum-utils-1.1.31-40.el7.n           oarch
--> Processing Dependency: libxml2-python for package: yum-utils-1.1.31-40.el7.n           oarch
---> Package zip.armv7hl 0:3.0-11.el7 will be installed
--> Running transaction check
---> Package apr.armv7hl 0:1.4.8-3.el7 will be installed
---> Package apr-util.armv7hl 0:1.5.2-6.el7 will be installed
---> Package libcurl.armv7hl 0:7.29.0-25.el7 will be updated
---> Package libcurl.armv7hl 0:7.29.0-35.el7 will be an update
---> Package libxml2-python.armv7hl 0:2.9.1-6.el7.3 will be installed
--> Processing Dependency: libxml2 = 2.9.1-6.el7.3 for package: libxml2-python-2           .9.1-6.el7.3.armv7hl
---> Package neon.armv7hl 0:0.30.0-3.el7 will be installed
--> Processing Dependency: libproxy.so.1 for package: neon-0.30.0-3.el7.armv7hl
--> Processing Dependency: libpakchois.so.0 for package: neon-0.30.0-3.el7.armv7           hl
---> Package python-kitchen.noarch 0:1.1.1-5.el7 will be installed
--> Processing Dependency: python-chardet for package: python-kitchen-1.1.1-5.el           7.noarch
---> Package subversion-libs.armv7hl 0:1.7.14-10.el7 will be installed
---> Package yum.noarch 0:3.4.3-118.el7.centos will be updated
---> Package yum.noarch 0:3.4.3-150.el7.centos will be an update
--> Processing Dependency: python-urlgrabber >= 3.10-8 for package: yum-3.4.3-15           0.el7.centos.noarch
--> Running transaction check
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package                  Arch       Version                   Repository  Size
================================================================================
Installing:
 subversion               armv7hl    1.7.14-10.el7             base       1.0 M
 unzip                    armv7hl    6.0-16.el7                base       163 k
 yum-plugin-priorities    noarch     1.1.31-40.el7             base        26 k
 yum-utils                noarch     1.1.31-40.el7             base       116 k
python-urlgrabber        noarch     3.10-8.el7                base       107 k
 yum                      noarch     3.4.3-150.el7.centos      base       1.2 M

Transaction Summary
================================================================================
Install  5 Packages (+9 Dependent packages)
Upgrade  2 Packages (+4 Dependent packages)

Total size: 6.1 M
Total download size: 3.4 M
Downloading packages:
(1/14): apr-1.4.8-3.el7.armv7hl.rpm                        |  91 kB   00:00
(2/14): apr-util-1.5.2-6.el7.armv7hl.rpm                   |  86 kB   00:00
 (13/14): yum-utils-1.1.31-40.el7.noarch.rpm                | 116 kB   00:00
(14/14): zip-3.0-11.el7.armv7hl.rpm                        | 247 kB   00:00
--------------------------------------------------------------------------------
Total                                              3.1 MB/s | 3.4 MB  00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : python-chardet-2.2.1-1.el7_1.noarch                         1/26
  Verifying  : yum-3.4.3-118.el7.centos.noarch                            23/26
  Verifying  : python-urlgrabber-3.10-4.el7.noarch                        24/26
  Verifying  : 2:vim-minimal-7.4.160-1.el7.armv7hl                        25/26
  Verifying  : libcurl-7.29.0-25.el7.armv7hl                              26/26

Installed:
  subversion.armv7hl 0:1.7.14-10.el7           unzip.armv7hl 0:6.0-16.el7
  yum-plugin-priorities.noarch 0:1.1.31-40.el7 yum-utils.noarch 0:1.1.31-40.el7
  zip.armv7hl 0:3.0-11.el7

Dependency Installed:
  apr.armv7hl 0:1.4.8-3.el7
  apr-util.armv7hl 0:1.5.2-6.el7
  libproxy.armv7hl 0:0.4.11-10.el7
  libxml2-python.armv7hl 0:2.9.1-6.el7.3
  neon.armv7hl 0:0.30.0-3.el7
  pakchois.armv7hl 0:0.4-10.el7
  python-chardet.noarch 0:2.2.1-1.el7_1
  python-kitchen.noarch 0:1.1.1-5.el7
  subversion-libs.armv7hl 0:1.7.14-10.el7

Updated:
  curl.armv7hl 0:7.29.0-35.el7       vim-minimal.armv7hl 2:7.4.160-1.el7.1

Dependency Updated:
  libcurl.armv7hl 0:7.29.0-35.el7          libxml2.armv7hl 0:2.9.1-6.el7.3
  python-urlgrabber.noarch 0:3.10-8.el7    yum.noarch 0:3.4.3-150.el7.centos

Complete!
[root@scw-41674a /]# yum install telnet wget -y
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package telnet.armv7hl 1:0.17-60.el7 will be installed
---> Package wget.armv7hl 0:1.14-10.el7.1 will be updated
---> Package wget.armv7hl 0:1.14-13.el7 will be an update
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package         Arch             Version                   Repository     Size
================================================================================
Installing:
 telnet          armv7hl          1:0.17-60.el7             base           61 k
Updating:
 wget            armv7hl          1.14-13.el7               base          528 k

Transaction Summary
================================================================================
Install  1 Package
Upgrade  1 Package

Total size: 589 k
Total download size: 61 k
Downloading packages:
telnet-0.17-60.el7.armv7hl.rpm                             |  61 kB   00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : 1:telnet-0.17-60.el7.armv7hl                                 1/3
  Updating   : wget-1.14-13.el7.armv7hl                                     2/3
  Cleanup    : wget-1.14-10.el7.1.armv7hl                                   3/3
  Verifying  : wget-1.14-13.el7.armv7hl                                     1/3
  Verifying  : 1:telnet-0.17-60.el7.armv7hl                                 2/3
  Verifying  : wget-1.14-10.el7.1.armv7hl                                   3/3

Installed:
  telnet.armv7hl 1:0.17-60.el7

Updated:
  wget.armv7hl 0:1.14-13.el7

Complete!
[root@scw-41674a /]# cd /
[root@scw-41674a /]# cd /tmp
[root@scw-41674a tmp]# rm -f mratwork*
[root@scw-41674a tmp]# rpm -ivh https://github.com/mustafaramadhan/rpms/raw/mast           er/mratwork/release/neutral/noarch/mratwork-release-0.0.1-1.noarch.rpm
Retrieving https://github.com/mustafaramadhan/rpms/raw/master/mratwork/release/n           eutral/noarch/mratwork-release-0.0.1-1.noarch.rpm
Preparing...                          ################################# [100%]
Updating / installing...
   1:mratwork-release-0.0.1-1         ################################# [100%]
[root@scw-41674a tmp]# cd /
[root@scw-41674a /]# yum clean all
Loaded plugins: fastestmirror, priorities
Cleaning repos: base extras mratwork-epel mratwork-google-mod-pagespeed
              : mratwork-ius-archive mratwork-mariadb mratwork-nginx
              : mratwork-nginx-stable mratwork-release-neutral-noarch
              : mratwork-release-version-arch mratwork-srpms
              : mratwork-varnish-3.0 mratwork-webtatic mratwork-webtatic-archive
              : mratwork-webtatic-testing updates
Cleaning up everything
Cleaning up list of fastest mirrors
[root@scw-41674a /]# yum update mratwork-* -y
Loaded plugins: fastestmirror, priorities
base                                                     | 3.6 kB     00:00
extras                                                   | 2.9 kB     00:00
mratwork-epel/7/armhfp/metalink                          |  37 kB     00:00
Could not parse metalink http://mirrors.fedoraproject.org/metalink?repo=epel-7&a           rch=armhfp error was
No repomd file


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

File /var/cache/yum/armhfp/7/mratwork-epel/metalink.xml does not exist
[root@scw-41674a /]# yum install kloxomr7 -y
Loaded plugins: fastestmirror, priorities
base                                                     | 3.6 kB     00:00
extras                                                   | 2.9 kB     00:00
mratwork-epel/7/armhfp/metalink                          |  37 kB     00:00
Could not parse metalink http://mirrors.fedoraproject.org/metalink?repo=epel-7&a           rch=armhfp error was
No repomd file


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

File /var/cache/yum/armhfp/7/mratwork-epel/metalink.xml does not exist
[root@scw-41674a /]# sh /script/upcp
sh: /script/upcp: No such file or directory
[root@scw-41674a /]#

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #4 on: 2017-04-24, 07:35:32 »
Are you using arm processor?. Look like it's not x86 processor.

Inform here 'cat /etc/*release; uname -m; dir -l /etc/yum.repos.d'.
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #5 on: 2017-04-24, 07:49:18 »
Are you using arm processor?. Look like it's not x86 processor.

Inform here 'cat /etc/*release; uname -m; dir -l /etc/yum.repos.d'.

Yes, using arm processor.

Code: [Select]
[root@scw-41674a ~]# cat /etc/*release; uname -m; dir -l /etc/yum.repos.d
CentOS Linux release 7.2.1511 (Core)
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"

Derived from Red Hat Enterprise Linux 7.2 (Source)
IMAGE_FLAVORS="common docker-based systemd"
IMAGE_TOOLS_CHECKOUT="276916c5288895ab02e753e138f3701c94141f64"
IMAGE_ID="CentOS 7"
IMAGE_RELEASE=2016-07-01
IMAGE_CODENAME=centos
IMAGE_DESCRIPTION="CentOS 7"
IMAGE_HELP_URL="https://community.scaleway.com"
IMAGE_SOURCE_URL="https://github.com/scaleway/image-centos"
IMAGE_DOC_URL="https://scaleway.com/docs"
CentOS Linux release 7.2.1511 (Core)
armv7l
total 40
-rw-r--r-- 1 root root  1049 Jul  1  2016 CentOS-Base.repo
-rw-r--r-- 1 root root  1309 Dec  2  2015 CentOS-CR.repo
-rw-r--r-- 1 root root   649 Dec  2  2015 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root  1331 Dec  2  2015 CentOS-Sources.repo
-rw-r--r-- 1 root root   505 Dec  2  2015 CentOS-Testing.repo
-rw-r--r-- 1 root root  1002 Dec  2  2015 CentOS-Vault.repo
-rw-r--r-- 1 root root   290 Dec  2  2015 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 10025 Mar 10 05:27 mratwork.repo
[root@scw-41674a ~]#

I have purchased this cloud server from online. net. You have recommended in another post.

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #6 on: 2017-04-24, 09:00:34 »
I am not sure about  your server. Look like your server using arm processor.

Can you give me information about your Scaleway VPS packages?.
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #7 on: 2017-04-24, 09:06:29 »
Inform here 'lscpu; cat /proc/cpuinfo'.
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #8 on: 2017-04-24, 09:27:25 »
Inform here 'lscpu; cat /proc/cpuinfo'.

Here is the details -

Code: [Select]
[root@scw-41674a ~]# lscpu; cat /proc/cpuinfo
Architecture:          armv7l
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    1
Core(s) per socket:    4
Socket(s):             1
Model name:            ARMv7 Processor rev 2 (v7l)
processor       : 0
model name      : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 50.00
Features        : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp                                                                                        d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0x584
CPU revision    : 2

processor       : 1
model name      : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 50.00
Features        : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp                                                                                        d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0x584
CPU revision    : 2

processor       : 2
model name      : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 50.00
Features        : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp                                                                                        d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0x584
CPU revision    : 2

processor       : 3
model name      : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 50.00
Features        : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp                                                                                        d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0x584
CPU revision    : 2

Hardware        : Marvell Armada 370/XP (Device Tree)
Revision        : 0000
Serial          : 0000000000000000
[root@scw-41674a ~]#

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #9 on: 2017-04-24, 09:39:15 »
So, you are using VPS with 'Marvell Armada 370/XP (Device Tree)' processor. For intel x86 (32bit or 64bit), there is something like:
Code: [Select]
> lscpu; cat /proc/cpuinfo
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                8
On-line CPU(s) list:   0-7
Thread(s) per core:    1
Core(s) per socket:    8
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 77
Model name:            Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
Stepping:              8
CPU MHz:               1200.000
BogoMIPS:              4800.19
Virtualization:        VT-x
L1d cache:             24K
L1i cache:             32K
L2 cache:              1024K
NUMA node0 CPU(s):     0-7
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 2401.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 0
cpu cores : 8
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 1
cpu cores : 8
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 2
cpu cores : 8
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 3
cpu cores : 8
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 4
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 4
cpu cores : 8
apicid : 8
initial apicid : 8
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 5
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 2100.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 5
cpu cores : 8
apicid : 10
initial apicid : 10
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 6
cpu cores : 8
apicid : 12
initial apicid : 12
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU  C2750  @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 7
cpu cores : 8
apicid : 14
initial apicid : 14
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

BTW, are you using?:
Code: [Select]
€2.99/Month
4 Dedicated ARM Cores
2GB Memory
50GB SSD Disk
 
1 Flexible public IPv4
200Mbit/s Internet bandwidth
1Gbit/s Internal bandwidth
instead:
Code: [Select]
2.99/Month
2 x86 64bit Cores
2GB Memory
50GB SSD Disk
1 Flexible public IPv4
200Mbit/s Unmetered bandwidth
Flexible volumes
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #10 on: 2017-04-26, 15:43:34 »
I have tried the second server you have mentioned but still, because of CentOS 7, it is not working.

So, I am thinking of taking this server https://www.online.net/en/dedicated-server/dedibox-md with CentOS 6.7. Will Kloxo-Mr work on this server?

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #11 on: 2017-04-26, 15:53:21 »
I have tried the second server you have mentioned but still, because of CentOS 7, it is not working.

So, I am thinking of taking this server https://www.online.net/en/dedicated-server/dedibox-md with CentOS 6.7. Will Kloxo-Mr work on this server?
Yes. It will be work under CentOS 6 or 7.
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #12 on: 2017-04-26, 15:59:41 »
Make sure your OS partitions as:
Code: [Select]
/boot => 512MB
SWAP => 4GB
/ (aka 'root') => rest of space
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

Offline sandipcd

  • Senior Member
  • *
  • Posts: 167
  • Karma: +0/-0
    • View Profile
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #13 on: 2017-04-27, 11:38:13 »
Make sure your OS partitions as:
Code: [Select]
/boot => 512MB
SWAP => 4GB
/ (aka 'root') => rest of space

I have got delivered the server and created the partition in this way. Please see the attachment. Is this ok?
Also is the RAID is ok? I want to get RAID 5.

Offline MRatWork

  • Administrator
  • The Elite
  • *****
  • Posts: 15,807
  • Karma: +119/-11
  • Gender: Male
    • View Profile
    • MRatWork Forum
Re: Installation Kloxo-mr in CentOS 7.2
« Reply #14 on: 2017-04-27, 11:56:59 »
You don't need /data partition. All rest space enough as /
..:: MRatWork (Mustafa Ramadhan Projects) ::..
-- Server/Web-integrator - Web Hosting (Kloxo-MR READY!) --

 


MRatWork Affiliates:    BIGRAF(R) Inc.    House of LMAR    EFARgrafix
Click Here

Page created in 0.045 seconds with 19 queries.

web stats analysis