MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: sandipcd on 2017-04-23, 19:08:49
-
How to install Kloxo-mr latest version in CentOS 7.2?
I have followed this instruction, but it is showing error - http://www.servermom.org/install-kloxo-mr-centos-vps/1832/
Can you please help?
-
Only Kloxo-MR 7.0 ready for CentOS 7.x
-
For how to install, see 'Click for "How to install"' top-left of this page (under Kloxo-MR logo).
-
For how to install, see 'Click for "How to install"' top-left of this page (under Kloxo-MR logo).
I have followed your installation but still getting the error. Can you please help?
Please see the commands and error below. I have to delete some code from below, as the post has 20000 character limitation, but the commands and error are all show.
[root@scw-41674a ~]# cd /
[root@scw-41674a /]# yum update -y
Loaded plugins: fastestmirror
base | 3.6 kB 00:00
extras | 2.9 kB 00:00
updates | 2.9 kB 00:00
(1/4): base/7/armhfp/group_gz | 154 kB 00:00
(2/4): extras/7/armhfp/primary_db | 14 kB 00:00
(3/4): updates/7/armhfp/primary_db | 1.1 MB 00:00
(4/4): base/7/armhfp/primary_db | 3.0 MB 00:00
Determining fastest mirrors
Resolving Dependencies
--> Running transaction check
---> Package alsa-lib.armv7hl 0:1.0.28-2.el7 will be updated
---> Package alsa-lib.armv7hl 0:1.1.1-1.el7 will be an update
---> Package filesystem.armv7hl 0:3.2-21.el7 will be an update
---> Package firewalld.noarch 0:0.3.9-7.el7 will be updated
---> Package firewalld.noarch 0:0.4.3.2-8.1.el7_3.2 will be an update
--> Processing Dependency: python-firewall = 0.4.3.2-8.1.el7_3.2 for package: fi rewalld-0.4.3.2-8.1.el7_3.2.noarch
--> Processing Dependency: firewalld-filesystem = 0.4.3.2-8.1.el7_3.2 for packag e: firewalld-0.4.3.2-8.1.el7_3.2.noarch
--> Processing Dependency: ipset for package: firewalld-0.4.3.2-8.1.el7_3.2.noar ch
---> Package glib2.armv7hl 0:2.42.2-5.el7 will be updated
---> Package glib2.armv7hl 0:2.46.2-4.el7 will be an update
---> Package yum-plugin-fastestmirror.noarch 0:1.1.31-25.el7_0 will be updated
---> Package yum-plugin-fastestmirror.noarch 0:1.1.31-40.el7 will be an update
---> Package zlib.armv7hl 0:1.2.7-15.el7 will be updated
---> Package zlib.armv7hl 0:1.2.7-17.el7 will be an update
--> Running transaction check
---> Package GeoIP.armv7hl 0:1.5.0-11.el7 will be installed
---> Package firewalld-filesystem.noarch 0:0.4.3.2-8.1.el7_3.2 will be installed
---> Package ipset.armv7hl 0:6.19-6.el7 will be installed
--> Processing Dependency: ipset-libs(armv7hl-32) = 6.19-6.el7 for package: ipse t-6.19-6.el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_3.0) for package: ipset-6.19-6 .el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_2.0) for package: ipset-6.19-6 .el7.armv7hl
--> Processing Dependency: libipset.so.3(LIBIPSET_1.0) for package: ipset-6.19-6 .el7.armv7hl
--> Processing Dependency: libipset.so.3 for package: ipset-6.19-6.el7.armv7hl
---> Package pciutils.armv7hl 0:3.5.1-1.el7 will be installed
--> Processing Dependency: pciutils-libs = 3.5.1-1.el7 for package: pciutils-3.5 .1-1.el7.armv7hl
--> Processing Dependency: libpci.so.3 for package: pciutils-3.5.1-1.el7.armv7hl
--> Processing Dependency: hwdata for package: pciutils-3.5.1-1.el7.armv7hl
---> Package python-firewall.noarch 0:0.4.3.2-8.1.el7_3.2 will be installed
--> Running transaction check
---> Package hwdata.armv7hl 0:0.252-8.4.el7 will be installed
---> Package ipset-libs.armv7hl 0:6.19-6.el7 will be installed
---> Package pciutils-libs.armv7hl 0:3.5.1-1.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository
Size
================================================================================
Updating:
alsa-lib armv7hl 1.1.1-1.el7 base 372 k
audit armv7hl 2.6.5-3.el7.1 updates 215 k
audit-libs armv7hl 2.6.5-3.el7.1 updates 77 k
ipset-libs armv7hl 6.19-6.el7 base 41 k
pciutils armv7hl 3.5.1-1.el7 base 88 k
pciutils-libs armv7hl 3.5.1-1.el7 base 41 k
python-firewall noarch 0.4.3.2-8.1.el7_3.2 updates 301 k
Transaction Summary
================================================================================
Install ( 8 Dependent packages)
Upgrade 148 Packages
Total download size: 101 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
warning: /var/cache/yum/armhfp/7/base/packages/GeoIP-1.5.0-11.el7.armv7hl.rpm: H eader V4 RSA/SHA1 Signature, key ID 62505fe6: NOKEY
Public key for GeoIP-1.5.0-11.el7.armv7hl.rpm is not installed
(1/156): GeoIP-1.5.0-11.el7.armv7hl.rpm | 1.1 MB 00:00
(2/156): alsa-lib-1.1.1-1.el7.armv7hl.rpm | 372 kB 00:00
Public key for audit-2.6.5-3.el7.1.armv7hl.rpm is not installed
(156/156): zlib-1.2.7-17.el7.armv7hl.rpm | 87 kB 00:00
--------------------------------------------------------------------------------
Total 5.3 MB/s | 101 MB 00:19
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
Importing GPG key 0x62505FE6:
Userid : "CentOS AltArch SIG - Arm32 (https://wiki.centos.org/SpecialIntere stGroup/AltArch/Arm32) <security@centos.org>"
Fingerprint: 4d9e 39f1 499c a21d d289 77f8 cafe f11b 6250 5fe6
Package : centos-userland-release-7-2.1511.el7.centos.0.4.armv7hl (@centos-b ase_rbf)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
warning: /var/cache/yum/armhfp/7/updates/packages/tzdata-2017b-1.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
The GPG keys listed for the "CentOS-7 - Updates" repository are already installe d but they are not correct for this package.
Check that the correct key URLs are configured for this repository.
Failing package is: tzdata-2017b-1.el7.noarch
GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltA rch-Arm32
[root@scw-41674a /]# yum install yum-utils yum-priorities vim-minimal subversion curl zip unzip -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package curl.armv7hl 0:7.29.0-25.el7 will be updated
---> Package curl.armv7hl 0:7.29.0-35.el7 will be an update
--> Processing Dependency: libcurl = 7.29.0-35.el7 for package: curl-7.29.0-35.e l7.armv7hl
---> Package subversion.armv7hl 0:1.7.14-10.el7 will be installed
--> Processing Dependency: subversion-libs(armv7hl-32) = 1.7.14-10.el7 for packa ge: subversion-1.7.14-10.el7.armv7hl
--> Processing Dependency: libsvn_wc-1.so.0 for package: subversion-1.7.14-10.el 7.armv7hl
--> Processing Dependency: libsvn_subr-1.so.0 for package: subversion-1.7.14-10. el7.armv7hl
--> Processing Dependency: libsvn_repos-1.so.0 for package: subversion-1.7.14-10 .el7.armv7hl
--> Processing Dependency: libaprutil-1.so.0 for package: subversion-1.7.14-10.e l7.armv7hl
--> Processing Dependency: libapr-1.so.0 for package: subversion-1.7.14-10.el7.a rmv7hl
---> Package unzip.armv7hl 0:6.0-16.el7 will be installed
---> Package vim-minimal.armv7hl 2:7.4.160-1.el7 will be updated
---> Package vim-minimal.armv7hl 2:7.4.160-1.el7.1 will be an update
---> Package yum-plugin-priorities.noarch 0:1.1.31-40.el7 will be installed
---> Package yum-utils.noarch 0:1.1.31-40.el7 will be installed
--> Processing Dependency: yum >= 3.4.3-143 for package: yum-utils-1.1.31-40.el7 .noarch
--> Processing Dependency: python-kitchen for package: yum-utils-1.1.31-40.el7.n oarch
--> Processing Dependency: libxml2-python for package: yum-utils-1.1.31-40.el7.n oarch
---> Package zip.armv7hl 0:3.0-11.el7 will be installed
--> Running transaction check
---> Package apr.armv7hl 0:1.4.8-3.el7 will be installed
---> Package apr-util.armv7hl 0:1.5.2-6.el7 will be installed
---> Package libcurl.armv7hl 0:7.29.0-25.el7 will be updated
---> Package libcurl.armv7hl 0:7.29.0-35.el7 will be an update
---> Package libxml2-python.armv7hl 0:2.9.1-6.el7.3 will be installed
--> Processing Dependency: libxml2 = 2.9.1-6.el7.3 for package: libxml2-python-2 .9.1-6.el7.3.armv7hl
---> Package neon.armv7hl 0:0.30.0-3.el7 will be installed
--> Processing Dependency: libproxy.so.1 for package: neon-0.30.0-3.el7.armv7hl
--> Processing Dependency: libpakchois.so.0 for package: neon-0.30.0-3.el7.armv7 hl
---> Package python-kitchen.noarch 0:1.1.1-5.el7 will be installed
--> Processing Dependency: python-chardet for package: python-kitchen-1.1.1-5.el 7.noarch
---> Package subversion-libs.armv7hl 0:1.7.14-10.el7 will be installed
---> Package yum.noarch 0:3.4.3-118.el7.centos will be updated
---> Package yum.noarch 0:3.4.3-150.el7.centos will be an update
--> Processing Dependency: python-urlgrabber >= 3.10-8 for package: yum-3.4.3-15 0.el7.centos.noarch
--> Running transaction check
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
subversion armv7hl 1.7.14-10.el7 base 1.0 M
unzip armv7hl 6.0-16.el7 base 163 k
yum-plugin-priorities noarch 1.1.31-40.el7 base 26 k
yum-utils noarch 1.1.31-40.el7 base 116 k
python-urlgrabber noarch 3.10-8.el7 base 107 k
yum noarch 3.4.3-150.el7.centos base 1.2 M
Transaction Summary
================================================================================
Install 5 Packages (+9 Dependent packages)
Upgrade 2 Packages (+4 Dependent packages)
Total size: 6.1 M
Total download size: 3.4 M
Downloading packages:
(1/14): apr-1.4.8-3.el7.armv7hl.rpm | 91 kB 00:00
(2/14): apr-util-1.5.2-6.el7.armv7hl.rpm | 86 kB 00:00
(13/14): yum-utils-1.1.31-40.el7.noarch.rpm | 116 kB 00:00
(14/14): zip-3.0-11.el7.armv7hl.rpm | 247 kB 00:00
--------------------------------------------------------------------------------
Total 3.1 MB/s | 3.4 MB 00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python-chardet-2.2.1-1.el7_1.noarch 1/26
Verifying : yum-3.4.3-118.el7.centos.noarch 23/26
Verifying : python-urlgrabber-3.10-4.el7.noarch 24/26
Verifying : 2:vim-minimal-7.4.160-1.el7.armv7hl 25/26
Verifying : libcurl-7.29.0-25.el7.armv7hl 26/26
Installed:
subversion.armv7hl 0:1.7.14-10.el7 unzip.armv7hl 0:6.0-16.el7
yum-plugin-priorities.noarch 0:1.1.31-40.el7 yum-utils.noarch 0:1.1.31-40.el7
zip.armv7hl 0:3.0-11.el7
Dependency Installed:
apr.armv7hl 0:1.4.8-3.el7
apr-util.armv7hl 0:1.5.2-6.el7
libproxy.armv7hl 0:0.4.11-10.el7
libxml2-python.armv7hl 0:2.9.1-6.el7.3
neon.armv7hl 0:0.30.0-3.el7
pakchois.armv7hl 0:0.4-10.el7
python-chardet.noarch 0:2.2.1-1.el7_1
python-kitchen.noarch 0:1.1.1-5.el7
subversion-libs.armv7hl 0:1.7.14-10.el7
Updated:
curl.armv7hl 0:7.29.0-35.el7 vim-minimal.armv7hl 2:7.4.160-1.el7.1
Dependency Updated:
libcurl.armv7hl 0:7.29.0-35.el7 libxml2.armv7hl 0:2.9.1-6.el7.3
python-urlgrabber.noarch 0:3.10-8.el7 yum.noarch 0:3.4.3-150.el7.centos
Complete!
[root@scw-41674a /]# yum install telnet wget -y
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package telnet.armv7hl 1:0.17-60.el7 will be installed
---> Package wget.armv7hl 0:1.14-10.el7.1 will be updated
---> Package wget.armv7hl 0:1.14-13.el7 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
telnet armv7hl 1:0.17-60.el7 base 61 k
Updating:
wget armv7hl 1.14-13.el7 base 528 k
Transaction Summary
================================================================================
Install 1 Package
Upgrade 1 Package
Total size: 589 k
Total download size: 61 k
Downloading packages:
telnet-0.17-60.el7.armv7hl.rpm | 61 kB 00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : 1:telnet-0.17-60.el7.armv7hl 1/3
Updating : wget-1.14-13.el7.armv7hl 2/3
Cleanup : wget-1.14-10.el7.1.armv7hl 3/3
Verifying : wget-1.14-13.el7.armv7hl 1/3
Verifying : 1:telnet-0.17-60.el7.armv7hl 2/3
Verifying : wget-1.14-10.el7.1.armv7hl 3/3
Installed:
telnet.armv7hl 1:0.17-60.el7
Updated:
wget.armv7hl 0:1.14-13.el7
Complete!
[root@scw-41674a /]# cd /
[root@scw-41674a /]# cd /tmp
[root@scw-41674a tmp]# rm -f mratwork*
[root@scw-41674a tmp]# rpm -ivh https://github.com/mustafaramadhan/rpms/raw/mast er/mratwork/release/neutral/noarch/mratwork-release-0.0.1-1.noarch.rpm
Retrieving https://github.com/mustafaramadhan/rpms/raw/master/mratwork/release/n eutral/noarch/mratwork-release-0.0.1-1.noarch.rpm
Preparing... ################################# [100%]
Updating / installing...
1:mratwork-release-0.0.1-1 ################################# [100%]
[root@scw-41674a tmp]# cd /
[root@scw-41674a /]# yum clean all
Loaded plugins: fastestmirror, priorities
Cleaning repos: base extras mratwork-epel mratwork-google-mod-pagespeed
: mratwork-ius-archive mratwork-mariadb mratwork-nginx
: mratwork-nginx-stable mratwork-release-neutral-noarch
: mratwork-release-version-arch mratwork-srpms
: mratwork-varnish-3.0 mratwork-webtatic mratwork-webtatic-archive
: mratwork-webtatic-testing updates
Cleaning up everything
Cleaning up list of fastest mirrors
[root@scw-41674a /]# yum update mratwork-* -y
Loaded plugins: fastestmirror, priorities
base | 3.6 kB 00:00
extras | 2.9 kB 00:00
mratwork-epel/7/armhfp/metalink | 37 kB 00:00
Could not parse metalink http://mirrors.fedoraproject.org/metalink?repo=epel-7&a rch=armhfp error was
No repomd file
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
File /var/cache/yum/armhfp/7/mratwork-epel/metalink.xml does not exist
[root@scw-41674a /]# yum install kloxomr7 -y
Loaded plugins: fastestmirror, priorities
base | 3.6 kB 00:00
extras | 2.9 kB 00:00
mratwork-epel/7/armhfp/metalink | 37 kB 00:00
Could not parse metalink http://mirrors.fedoraproject.org/metalink?repo=epel-7&a rch=armhfp error was
No repomd file
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
File /var/cache/yum/armhfp/7/mratwork-epel/metalink.xml does not exist
[root@scw-41674a /]# sh /script/upcp
sh: /script/upcp: No such file or directory
[root@scw-41674a /]#
-
Are you using arm processor?. Look like it's not x86 processor.
Inform here 'cat /etc/*release; uname -m; dir -l /etc/yum.repos.d'.
-
Are you using arm processor?. Look like it's not x86 processor.
Inform here 'cat /etc/*release; uname -m; dir -l /etc/yum.repos.d'.
Yes, using arm processor.
[root@scw-41674a ~]# cat /etc/*release; uname -m; dir -l /etc/yum.repos.d
CentOS Linux release 7.2.1511 (Core)
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"
CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"
Derived from Red Hat Enterprise Linux 7.2 (Source)
IMAGE_FLAVORS="common docker-based systemd"
IMAGE_TOOLS_CHECKOUT="276916c5288895ab02e753e138f3701c94141f64"
IMAGE_ID="CentOS 7"
IMAGE_RELEASE=2016-07-01
IMAGE_CODENAME=centos
IMAGE_DESCRIPTION="CentOS 7"
IMAGE_HELP_URL="https://community.scaleway.com"
IMAGE_SOURCE_URL="https://github.com/scaleway/image-centos"
IMAGE_DOC_URL="https://scaleway.com/docs"
CentOS Linux release 7.2.1511 (Core)
armv7l
total 40
-rw-r--r-- 1 root root 1049 Jul 1 2016 CentOS-Base.repo
-rw-r--r-- 1 root root 1309 Dec 2 2015 CentOS-CR.repo
-rw-r--r-- 1 root root 649 Dec 2 2015 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root 1331 Dec 2 2015 CentOS-Sources.repo
-rw-r--r-- 1 root root 505 Dec 2 2015 CentOS-Testing.repo
-rw-r--r-- 1 root root 1002 Dec 2 2015 CentOS-Vault.repo
-rw-r--r-- 1 root root 290 Dec 2 2015 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 10025 Mar 10 05:27 mratwork.repo
[root@scw-41674a ~]#
I have purchased this cloud server from online. net. You have recommended in another post.
-
I am not sure about your server. Look like your server using arm processor.
Can you give me information about your Scaleway VPS packages?.
-
Inform here 'lscpu; cat /proc/cpuinfo'.
-
Inform here 'lscpu; cat /proc/cpuinfo'.
Here is the details -
[root@scw-41674a ~]# lscpu; cat /proc/cpuinfo
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model name: ARMv7 Processor rev 2 (v7l)
processor : 0
model name : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 50.00
Features : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
processor : 1
model name : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 50.00
Features : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
processor : 2
model name : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 50.00
Features : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
processor : 3
model name : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 50.00
Features : half thumb fastmult vfp edsp thumbee vfpv3 tls idiva idivt vfp d32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
Hardware : Marvell Armada 370/XP (Device Tree)
Revision : 0000
Serial : 0000000000000000
[root@scw-41674a ~]#
-
So, you are using VPS with 'Marvell Armada 370/XP (Device Tree)' processor. For intel x86 (32bit or 64bit), there is something like:
> lscpu; cat /proc/cpuinfo
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 77
Model name: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
Stepping: 8
CPU MHz: 1200.000
BogoMIPS: 4800.19
Virtualization: VT-x
L1d cache: 24K
L1i cache: 32K
L2 cache: 1024K
NUMA node0 CPU(s): 0-7
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 2401.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 0
cpu cores : 8
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 1
cpu cores : 8
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 2
cpu cores : 8
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 3
cpu cores : 8
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 4
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 4
cpu cores : 8
apicid : 8
initial apicid : 8
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 5
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 2100.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 5
cpu cores : 8
apicid : 10
initial apicid : 10
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 6
cpu cores : 8
apicid : 12
initial apicid : 12
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 77
model name : Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
stepping : 8
microcode : 290
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 8
core id : 7
cpu cores : 8
apicid : 14
initial apicid : 14
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid smep erms
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
BTW, are you using?:
€2.99/Month
4 Dedicated ARM Cores
2GB Memory
50GB SSD Disk
1 Flexible public IPv4
200Mbit/s Internet bandwidth
1Gbit/s Internal bandwidth
instead:
2.99/Month
2 x86 64bit Cores
2GB Memory
50GB SSD Disk
1 Flexible public IPv4
200Mbit/s Unmetered bandwidth
Flexible volumes
-
I have tried the second server you have mentioned but still, because of CentOS 7, it is not working.
So, I am thinking of taking this server https://www.online.net/en/dedicated-server/dedibox-md with CentOS 6.7. Will Kloxo-Mr work on this server?
-
I have tried the second server you have mentioned but still, because of CentOS 7, it is not working.
So, I am thinking of taking this server https://www.online.net/en/dedicated-server/dedibox-md with CentOS 6.7. Will Kloxo-Mr work on this server?
Yes. It will be work under CentOS 6 or 7.
-
Make sure your OS partitions as:
/boot => 512MB
SWAP => 4GB
/ (aka 'root') => rest of space
-
Make sure your OS partitions as:
/boot => 512MB
SWAP => 4GB
/ (aka 'root') => rest of space
I have got delivered the server and created the partition in this way. Please see the attachment. Is this ok?
Also is the RAID is ok? I want to get RAID 5.
-
You don't need /data partition. All rest space enough as /