MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: mohsenrag on 2019-08-27, 10:30:44
-
Hi,
In last week everyday we get "Authentication failed" in rainloop, I try to use afterlogic and so on but all of them have problems.
Try to use cleanup, fixmail, fixmail-all, restart-mail, service qmail stop and start, and so on.
After many tries mail are working but next day we have same problem.
Another point is when using restart-mail,restart-web or mysql I get many times:
Failed to list unit files: Connection timed out
also when use service mysql stop, It fails becuase another mysql is still running.
Sysinfo:
sh /script/sysinfo
Failed to list unit files: Connection timed out
cat: /etc/rc.d/init.d/php-fpm: No such file or directory
A. Control Panel:
- Kloxo-MR: 7.0.0.c-2019070501
- Web: hiawatha-10.9.0-f.2.mr.el7.x86_64
- PHP: php56s - 5.6.40-1.ius.el7 (cgi mode)
B. Plateform:
- OS: CentOS Linux release 7.6.1810 (Core) x86_64
- Hostname: server2.techroom.ir
C. Services:
1. MySQL: MariaDB-server-10.0.38-1.el7.centos.x86_64
2. PHP:
- Installed:
- Branch: php56u-cli-5.6.40-1.ius.el7.x86_64
- Used: --PHP Branch--
- Multiple: disable
3. Web Used: apache
- Hiawatha: hiawatha-10.9.0-f.2.mr.el7.x86_64
- Lighttpd: lighttpd-1.4.54-1.el7.x86_64
- Nginx: nginx-1.17.3-1.el7.ngx.x86_64
- Apache: httpd24u-2.4.39-2.el7.ius.x86_64
- PHP Type: php-fpm_event
- Secondary PHP: off
4. WebCache: varnish
- ATS: --uninstalled--
- Squid: --uninstalled--
- Varnish: varnish-5.2.1-1.el7.x86_64
5. Dns: nsd
- Bind: bind-9.9.9-1.mr.el7.x86_64
- DJBDns: djbdns-1.05-17.4.mr.el7.x86_64
- NSD: nsd-4.1.27-1.mr.el7.x86_64
- PowerDNS: pdns-4.1.11-1.el7.x86_64
- Yadifa: yadifa-2.3.9-1.el7.x86_64
6. Mail: qmail-toaster-1.03-1.3.57.mr.el7.x86_64
- pop3/imap4: courier-imap-toaster-4.1.2-1.3.20.mr.el7.x86_64
- smtp: qmail-toaster-1.03-1.3.57.mr.el7.x86_64
- spam: bogofilter-1.2.3-6.el7.x86_64
7. FTP: pure-ftpd
- pure-ftpd: pure-ftpd-1.0.49-1.mr.el7.x86_64
8. Stats: awstats
- awstats: kloxomr-stats-awstats-7.7-1.mr.noarch
D. Memory:
total used free shared buff/cache available
Mem: 3512 1333 771 458 1406 2178
Swap: 3768 278 3489
E. Disk Space:
Filesystem Size Used Avail Use% Mounted on
/dev/loop4 98G 78G 16G 84% /
*** Process Time: 00:00:02:58.178054 (dd:hh:mm:ss:xxxxxx) ***
* Note: run 'sh /script/sysinfo -y' if you want run 'fix-service-list' also
(importance after Kloxo-MR update)
-
Give me your root ssh and admin Kloxo-MR panel.
-
I reboot server as your advise.
Apache said:
If you are seeing this page, it means that web has not been configured for this domain on this server.
This could be due to the following causes:
Kloxo has not restarted the web server yet after you added the domain. Please wait for the web server to restart.
The domain is pointing to the wrong Kloxo server. Ping the domain and make sure that the IP matches one of the IPaddress seen in admin home -> ipaddresses
If you are seeing this page when you try to access an IP like http://192.168.1.1, then that means that the IP has not yet been mapped to a domain. Go to client home -> ipaddresses -> ipaddress home -> domain config and map an IP to a domain.
Once you map an IP to a domain, then you have to make sure that the domain pings back to the same IP. Otherwise, if you try to access the domain, you will get this page. So IP -> domain.com should mean that domain.com
I change web server to nginx.
SSL doesn't worked. Append ssl to: /opt/configs/nginx/conf/globals/listen_ssl.conf
listen 443 ssl;
listen [::]:443 ssl;
and right now RAINLOOP cannot authenticate again.
-
HTTPS don't work with webcache (like varnish). Alternatively, use nginx with pagespeed enable.
-
But it works with adding ssl to listen_ssl.cof,
anyway
THE Main Problem: Authentication fails in rainloop still exist...
-
Yes, because port 443 listen by nginx alone. Varnish only listen port 80.
Because want using https, enable varnish is useless.