MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Technical Helps => Topic started by: tega on 2016-01-12, 23:58:44
-
Hello,
Since the last update, apache 2.4 is driving me crazy, for some reason, it stop working, so I did several times sh /script/upcp -y, there's no issues. It installs the apache 2.2 normally, on the panel (also did sh /scripts/switch-apache httpd24) installs normally, but when I try to reset it (sh /scripts/restartweb-all) I get
sh /script/restart-web
*** Process for PHP-FPM service ***
- Process: reload
Reloading php-fpm: [ OK ]
-------------------------------------------------------------------
*** Process for HTTPD service ***
Starting httpd: httpd: Syntax error on line 13 of /etc/httpd/conf/httpd.conf: Cannot load modules/mod_authn_alias.so into server: /etc/httpd/modules/mod_authn_alias.so: cannot open shared object file: No such file or directory
[FAILED]
- Process with 'httpd': restart
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 13 of /etc/httpd/conf/httpd.conf: Cannot load modules/mod_authn_alias.so into server: /etc/httpd/modules/mod_authn_alias.so: cannot open shared object file: No such file or directory
[FAILED]
-------------------------------------------------------------------
- For help, type '/script/restart-web [--help|-h]'
It was working fine before today's update on kloxo.
I went to check the conf file on /etc/httpd/conf/httpd.conf and I noticed that is loading modules for the 2.2 version.
so I switched to 2.2 again and removed it manually by doing the command yum remove httpd* mod_* also did rm -rf /etc/httpd/ and finally sh /script/upcp -y. got the apache again on the 2.2 version but I switch to 2.4 with sh /scripts/switch-apache httpd24, I have the same problem, the config files are not changing.
And yes of course I did sh /script/fixweb ; sh /script/fixphp ; sh /script/restartweb in every time that I switched the apache version.
This is happening in all of my VPS that run kloxo mr, I was working perfectly before. :(
Here's the sysinfo:
A. Kloxo-MR: 7.0.0.b-2016011202
- Web: hiawatha-10.0.0-f.6.mr.el6.i686
- PHP: php54s-5.4.45-2.w6 (cgi mode)
B. Plateform:
- OS: CentOS release 6.7 (Final) i686
- Hostname: tegarte.com
C. Services:
1. MySQL: MariaDB-server-10.0.23-1.el6.i686
2. PHP:
- Branch: php54-cli-5.4.45-1.ius.el6.i686
- Multiple:
* php52m-5.2.17-102.mr.el6
* php53m-5.3.29-1.ius.el6
* php54m-5.4.44-1.w6
* php55m-5.5.28-1.ius.el6
* php56m-5.6.12-1.ius.el6
- Used: --Use PHP Branch--
3. Httpd: httpd24u-2.4.18-1.ius.el6.i686
- PHP Type: [unknown]
4. Lighttpd: --uninstalled--
5. Hiawatha: --unused--
6. Nginx: --uninstalled--
7. Cache: --uninstalled--
8. Dns: bind-9.9.7-1.mr.el6.i386
9. Qmail: qmail-toaster-1.03-1.3.55.mr.el6.i386
- with: courier-imap-toaster-4.1.2-1.3.18.mr.el6.i386
D. Memory:
total used free shared buffers cached
Mem: 512 366 145 21 0 264
-/+ buffers/cache: 101 410
Swap: 512 51 460
E. Disk Space:
Filesystem Size Used Avail Use% Mounted on
/dev/simfs 100G 15G 86G 15% /
And this is the first lines of httpd.conf:
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
# MR -- must be disable here because can not overrite! -- importance for proxy-to-apache
# Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
...
I really need Apache 2.4
-
And I meant: sh /script/restartweb and not sh /scripts/restartweb-all
For some reason I wasn't able to edit the post.
-
There something wrong with apach24 and want change their model.
-
Exactly, have no idea why this is happening.
These are my repos:
rw-r--r-- 1 root root 1991 Aug 3 12:13 CentOS-Base.repo
-rw-r--r-- 1 root root 647 Aug 3 12:13 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root 630 Aug 3 12:13 CentOS-Media.repo
-rw-r--r-- 1 root root 6259 Aug 3 12:13 CentOS-Vault.repo
-rw-r--r-- 1 root root 289 Aug 3 12:13 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 8411 Jan 12 20:09 mratwork.repo
-rw-r--r-- 1 root root 8412 Jan 12 20:07 mratwork.repo.rpmsave
-rw-r--r-- 1 root root 219 Oct 21 2014 vz.repo
I'm out of ideas in how to fix this issue, also at this point I can't use any of the other servers, for completely different reasons, basically:
apache 2.2 = some of my websites are stuck at the default page (the one say that the IP address is not set, to go to admin home -> ip addresses (fixweb and fixphp doesn't fix it)
nginx = get's me an error saying that there's no switch_standard_ssl.conf
lighttpd = gives me a 403 error in all of my websites
hiawatcha = show page not found in all of my websites.
Once again I did fixweb, fixphp and restart-web everytime I changed the webserver.
And then there's apache 2.4, that for some reason with everything I did still keeps the apache 2.2 configs everywhere.
My head is about to explode, I'm trying to avoid doing a fresh install of my server, since everything is working fine, just the webserver.
-
There's some light at the end of the tunnel, basically, I discovered that after I do sh /script/switch-apache httpd24 the file /etc/httpd/conf/httpd.conf has the correct configuration for apache 2.4 (I know cause I'm comparing to an old backup) The file has 4KB and only I after I do sh /script/fixweb the httpd.conf reverts to the configuration of httpd.conf of apache 2.2 (with all those loadmodules lines). And the file size is 9KB
So why fixweb changing the config from apache 2.4 to apache 2.2 even though is the apache 2.4 that is installed?
-
Don't use httpd24 at this moment.
-
I have to use httpd cause of the modules and also rebuild the htaccess files for every site I own with the modules that I want in each of them it will be a pain in the butt. And httpd 2.2 gets stuck on the page that say the "If you are seeing this page, it means that web has not been configured for this domain on this server."
With no changes on the server config, I can't get that to work.
Also I can get httpd 2.4 to work with a trick but this does not hold, basically after I switch to httpd 2.4, and before I do the fixweb command if I save the httpd.conf and replace it with the one that is generated after the fixweb httpd is working like a charm, the problem is I can't fixweb and that with kloxo will be hard with all the updates and the crons.
Don't you have any idea why fixweb reverts the httpd 2.4 to the 2.2 conf? This wasn't happening before and I was using httpd 2.4 for months without issues!
-
What's file(s) changed by fixweb that need by httpd 2.4?.
-
the one that I noticed is /etc/httpd/conf/httpd.conf (it could be more, but I have not noticed) basically after doing the switch-apache httpd24, that httpd.conf is set as supposed too to httpd 2.4, but after I do the fixweb the conf of that files reverts to the conf of httpd 2.2, so when I do the restart-web I get an error on the httpd.conf has the modules for the httpd 2.2 when I have httpd 2.4 installed.
Weirdest thing ever
-
Using nginx-/hiawatha-proxy or apache standalone?.
-
Apache only, tried nginx, but also can't start it, cause it says the file /opt/configs/nginx/conf/globals/switch_standard_ssl.conf is missing:
[root@tegarte ~]# sh /script/restart-web
*** Process for PHP-FPM service ***
- Process: reload
Reloading php-fpm: [ OK ]
-------------------------------------------------------------------
*** Process for NGINX service ***
Starting nginx: nginx: [emerg] open() "/opt/configs/nginx/conf/globals/switch_standard_ssl.conf" failed (2: No such file or directory) in /opt/configs/nginx/conf/defaults/init.conf:56
[FAILED]
- Process: reload
Reloading nginx: [FAILED]
-------------------------------------------------------------------
- For help, type '/script/restart-web [--help|-h]'
[root@tegarte ~]# sh /script/fixssl
- For help, type '/script/fixssl [--help|-h]'
- No argument supplied. Defaulting to localhost (master) servers
But again, I would prefer to have apache working, at this point, I don't care if it's 2.2 or 2.4
-
Need update your Kloxo-MR and run cleanup but wait next update to 2016011301
-
Thanks, will do!
-
The down side is that the update did not fixed any of my problems, I will consider doing a fresh reinstalation in the future, but for now and this is the up side, is that I managed to get lighttpd working, even though I'm still strugling with getting it work with my SSL certs, I have the same .pem file with all my certs that I used on apache, but for some reason is not getting the chain correctly, but I think I will figure it out (I hope).
It's bummer not having apache working as before, but if I can get lighttpd to work in the same way I will be happy for now.
-
Step to use apache24, choose 'none' and then choose 'apache' with enable 'apache24'.
Make sure use httpd24 file exist in /etc/sysconfig/ and 'httpd -v' appear version 2.4.x. Use php-fpm_event instead other (like suphp).
-
Oh finally it looks now the apache 2.4 has the correct configuration.
httpd -v
Server version: Apache/2.4.18 (Red Hat)
But now I have a new issue:
service httpd restart
Stopping httpd: [FAILED]
Starting httpd: no listening sockets available, shutting down
AH00015: Unable to open logs
[FAILED]
So I checked netstat nothing is running on the port 80 (or 443)
netstat -an | grep LISTEN
tcp 0 0 127.0.0.1:7776 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:7779 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:55333 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:52777 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:50001 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:52778 0.0.0.0:* LISTEN
tcp 0 0 :::25 :::* LISTEN
tcp 0 0 :::993 :::* LISTEN
tcp 0 0 :::995 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
tcp 0 0 :::3306 :::* LISTEN
tcp 0 0 :::587 :::* LISTEN
tcp 0 0 :::110 :::* LISTEN
tcp 0 0 :::143 :::* LISTEN
tcp 0 0 :::465 :::* LISTEN
Also I rebooted the server after getting apache working, iptables is completely clear of rules and /etc/hosts is correctly set.
So what could be the problem for this new issue?
-
Nevermind I finally figured it out the problem, basically, by comparing the files with my backup I noticed that the file /etc/httpd/conf.d/~lxcenter.conf was missing, which contains the includes for the domain config files right?
so I just run sh /script/apache-optimize and the file ~lxcenter.conf was generated!
Finally looks like everything is working fine as it was before, I apologize for being a pain in the but! Thanks for the support Mustafa for the support. I will try to donate you something, being a long time user of Kloxo it's only fair.
-
I have a plan to change how to Kloxo-MR handling web server. Two options:
1. Install all web server together and then on/off for their services depend on what's we want. Sadly this appoarch not work if we want apache 2.2 and apache 2.4 installed together. Need recompile apache 2.4 with special treatment, or
2. Extract all web server binary in /opt but need special treatment for their init and configure. This trick like I did for 'multiple php'.