MRatWork Forum by Mustafa Ramadhan

Sawo Project - Kloxo-MR Discussions => Kloxo-MR Releases => Topic started by: dfreddie on 2013-03-19, 02:11:09

Title: Kloxo-Mr 6.5.0 f
Post by: dfreddie on 2013-03-19, 02:11:09
There is a real "How To" for install this final version?
Thanks.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-19, 02:28:41
As i see its still not released. Wait a couple of hours, and i believe Mustafa will announce.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-19, 04:15:00
maybe mustafa will release soon
because him had problem with network, cant upload big size to github (thats problem with our ISP)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: bugis on 2013-03-19, 19:31:03
hello
if the final version is uploaded ?
how to upgrade via ssh ?

Thanks  ;)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: WPF on 2013-03-20, 16:15:59
not update :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-20, 18:49:40
We all wait. It's a conspiracy... exactly on the day of release...., ISP have problems.
Just a joke :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-20, 21:56:41
Now seriously. Approximately when (f) will be uploaded?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-20, 21:59:53
Quote from: "insanity"
Now seriously. Approximately when (f) will be uploaded?
Ask to my internet provider (telkom.net.id) when their internet connection back to normal (especially to europe).
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-21, 00:48:04
Quote from: "MRatWork"
Quote from: "insanity"
Now seriously. Approximately when (f) will be uploaded?
Ask to my internet provider (telkom.net.id) when their internet connection back to normal (especially to europe).

Change ISP Mustafa...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-21, 04:19:29
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-22, 02:08:21
Quote from: "goblog"
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(

What kind of speed you can get ? We can get up to 100 Mbps on cable modem or 250 Mbps download via fiber in some locations only - bandwidth is of course unlimited ;)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: nusapenida on 2013-03-22, 04:35:39
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.

Thank you very much for the final update.  :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-22, 04:53:00
Quote from: "nusapenida"
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.

Thank you very much for the final update.  :)

There is no final yet. The latest is: Kloxo-MR 6.5.0.c.2013031710
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-22, 05:07:41
Quote from: "Spacedust"
Quote from: "goblog"
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(

What kind of speed you can get ? We can get up to 100 Mbps on cable modem or 250 Mbps download via fiber in some locations only - bandwidth is of course unlimited ;)

on my speed via cable just get 2Mbps :hammer:

here is the price about my provider (Telkomspeedy)

(http://telkomspeedy.com/sites/default/files/paket%20maret%202012_2.png)

rate usd to idr is = 10,000

you can calculate it :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-22, 05:14:10
Quote from: "nusapenida"
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.

Thank you very much for the final update.  :)

for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-22, 05:27:14
Mustafa please disable collecquota in scavenge. It takes a lot of time to count something that does not work !
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-22, 16:52:01
Quote from: "goblog"
Quote from: "nusapenida"
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.

Thank you very much for the final update.  :)

for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file


I ask Mustafa, if he want to give him a VPS not located in EU (the problem zone), with GitHub installed, so he can upload the kloxo directly from that vps. Unfortunately i don't get answer :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-22, 16:55:42
Quote from: "insanity"
Quote from: "goblog"
Quote from: "nusapenida"
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.

Thank you very much for the final update.  :)

for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file


I ask Mustafa, if he want to give him a VPS not located in EU (the problem zone), with GitHub installed, so he can upload the kloxo directly from that vps. Unfortunately i don't get answer :)

Yes, he should get one. At least with 100 Mbps link ;)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-22, 17:00:06
There is nothing we can do...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-23, 01:03:26
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-23, 01:09:12
Quote from: "insanity"
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)

We've got fiber cut in our biggest ISP right here in Poland which almost offlined whole city, but they've fixed this in 2 hours time :) People were shouting like crazy on their Facebook page.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-23, 01:11:40
Quote from: "Spacedust"
Quote from: "insanity"
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)

We've got fiber cut in our biggest ISP right here in Poland which almost offlined whole city, but they've fixed this in 2 hours time :) People were shouting like crazy on their Facebook page.

Yes 1-3 days are normal for serious problem... But one week.. without some announce from the dev it is a little bit strange...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-23, 04:14:41
Finally it's released !
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-23, 04:17:44
Quote from: "Spacedust"
Finally it's released !

Yes and its a testing time :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-23, 04:25:16
Quote from: "insanity"
Quote from: "Spacedust"
Finally it's released !

Yes and its a testing time :D

yum install kloxomr
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-03-23, 04:28:41
Not working - displays 500 - Internal Server Error on Kloxo page... :/

Updating from latest candidate.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-23, 04:29:39
I even can't install it
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-23, 07:31:38
Upgrade from Kloxo-MR 6.5.0c success  :D

(http://img266.imageshack.us/img266/6008/abf9440df03742419917536.png)

Code: [Select]
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
cd /
yum install kloxomr
reboot

displays 500 - Internal Server Error on Kloxo page
use:
Code: [Select]
chmod -R 777 /script/
/script/cleanup
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 07:37:24
@ariefewweb,

Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after update (before reboot)?.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-23, 07:55:15
Quote from: "MRatWork"
@ariefewweb,

Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after update (before reboot)?.
I just run (for update 5 vps):
Code: [Select]
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
cd /
yum install kloxomr
chmod -R 777 /script/
/script/cleanup
reboot
:D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 08:00:22
If our 'yum install kloxomr' or 'yum update kloxomr' (depend on situation) we will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' on bottom. So, running this script.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-23, 08:11:00
vps 1

Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031802

B. OS: CentOS release 6.4 (Final) x86_64

C. Apps:
   1. MySQL: mysql-5.5.29-1.el6.x86_64
   2. PHP: php53u-5.3.23-1.ius.el6.x86_64
   3. Httpd: httpd-2.2.23-1.el6.x86_64
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.14-1.el6.x86_64
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64
   7. Dns: --uninstalled--

D. Php-type (for Httpd/proxy): php-fpm_event

VPS 2

Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031802

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php53u-5.3.23-1.ius.el5
   3. Httpd: httpd-2.2.23-3.el5
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-special-1.3.11-2.mr.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy): mod_php_ruid2

VPS 3

Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031801

B. OS: CentOS release 6.4 (Final) i686

C. Apps:
   1. MySQL: MariaDB-server-10.0.1-1.i686
   2. PHP: php53u-5.3.23-1.ius.el6.i686
   3. Httpd: httpd-2.2.23-1.el6.i686
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.14-1.el6.i686
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.i686
   7. Dns: bind-9.9.2-2.P1.el6.i686

D. Php-type (for Httpd/proxy): php-fpm_event

Thanks @mustafaramadhan
#sembahsungkem
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 08:17:54
For VPS3 just running 'yum update kloxomr'
Title: Re: Kloxo-Mr 6.5.0 f
Post by: techpad on 2013-03-23, 16:41:08
Problem with installer:
./installer.sh: line 157: $1: ambiguous redirect
./installer.sh: line 158: $1: ambiguous redirect
./installer.sh: line 159: $1: ambiguous redirect
Could not open input file: installer.php
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 16:56:00
Quote from: "techpad"
Problem with installer:
./installer.sh: line 157: $1: ambiguous redirect
./installer.sh: line 158: $1: ambiguous redirect
./installer.sh: line 159: $1: ambiguous redirect
Could not open input file: installer.php
What's going on still using installer.sh (in this context only for development step).

Kloxo-MR 6.5.0.f is a final release where using 'yum install kloxomr'.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: onemanarmy on 2013-03-23, 18:49:28
YUM Gave Error... Trying Again...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-23, 19:50:31
after update
then run sh /script/cleanup

all site 404 notfound
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-23, 19:54:36
Quote from: "onemanarmy"
YUM Gave Error... Trying Again...
complete error report: fresh install final version (64/62 bit)
Code: [Select]
--> Finished Dependency Resolution
Error: Package: php-imap-5.3.3-22.el6.i686 (base)
  Requires: php-common(x86-32) = 5.3.3-22.el6
           Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
               php-common(x86-32) = 5.3.23-1.el6
           Available: php-common-5.3.3-22.el6.i686 (base)
               php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-pspell-5.3.3-22.el6.i686 (base)
           Requires: php-common(x86-32) = 5.3.3-22.el6
           Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
               php-common(x86-32) = 5.3.23-1.el6
           Available: php-common-5.3.3-22.el6.i686 (base)
               php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-gd-5.3.3-22.el6.i686 (base)
           Requires: php-common(x86-32) = 5.3.3-22.el6
           Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
               php-common(x86-32) = 5.3.23-1.el6
           Available: php-common-5.3.3-22.el6.i686 (base)
               php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-mbstring-5.3.3-22.el6.i686 (base)
           Requires: php-common(x86-32) = 5.3.3-22.el6
           Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
               php-common(x86-32) = 5.3.23-1.el6
           Available: php-common-5.3.3-22.el6.i686 (base)
               php-common(x86-32) = 5.3.3-22.el6
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.i686 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-23, 19:58:01
Quote from: "goblog"
after update
then run sh /script/cleanup

all site 404 notfound


fix after reboot
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 20:11:22
@zenkul,

Fresh install or update?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: onemanarmy on 2013-03-23, 20:14:29
same error for me and i was doing fresh install.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-23, 20:15:22
Quote from: "MRatWork"
@zenkul,

Fresh install or update?

fresh install centos 6 62 & 32 bit (same error)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: WPF on 2013-03-23, 20:15:58
all tutorial install and fix kloxo 6.5 final internal server error :o
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Kloxouser5 on 2013-03-23, 20:18:16
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-23, 20:23:25
Quote from: "Kloxouser5"
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download  :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Kloxouser5 on 2013-03-23, 20:42:45
Thank you Zenkul ! I'll try again.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: onemanarmy on 2013-03-23, 20:44:19
Quote from: "zenkul"
Quote from: "Kloxouser5"
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download  :D

Happened with me too tried again same problem.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: GeorgeIdentNA on 2013-03-23, 20:45:09
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-23, 20:45:49
Yes i try to 2 fresh installed servers CentOS 5.9 32 and 64 bits. Same problem. I can't install final.
But if i install Kloxo Official first and then update to kloxo-mr everything work
Title: Re: Kloxo-Mr 6.5.0 f
Post by: GeorgeIdentNA on 2013-03-23, 20:57:10
Quote from: "insanity"
Yes i try to 2 fresh installed servers CentOS 5.9 32 and 64 bits. Same problem. I can't install final.
But if i install Kloxo Official first and then update to kloxo-mr everything work
thank you, how can I update from official kloxo to kloxo-mr?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 20:58:07
Quote from: "mahs"
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after 'yum install kloxomr'?.

You will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' at the end of 'yum install kloxomr'.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-23, 21:05:40
Quote from: "onemanarmy"
Quote from: "zenkul"
Quote from: "Kloxouser5"
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download  :D

Happened with me too tried again same problem.

sorry, me to : at Dev Version installation
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 21:36:40
Look like have a problem on centos and epel repo. Maybe they still in update process.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: GeorgeIdentNA on 2013-03-23, 21:59:55
Quote from: "MRatWork"
Quote from: "mahs"
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after 'yum install kloxomr'?.

You will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' at the end of 'yum install kloxomr'.
Thank you :) , after I run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' I got 'YUM Gave Error...'
How can I resolve this problem?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-23, 22:09:10
My latest test, there are something wrong with centalt and epel repo. Maybe why we found 'YUM Error'.

I am still investigation about it because before release Final 6.5.0.f-2013031802 I was testing on fresh install and running well.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: compy22 on 2013-03-23, 23:52:33
I try to install a fresh install and get the same error...
==== my install info
directspace.net - OpenVZ - RAM 1gb - HD 30gb
centos 6.4 64bit
root login
cd /root
yum update
yum install yum-utils yum-priorities vim-minimal subversion curl zip unzip
yum install telnet
setenforce 0
echo 'SELINUX=disabled' > /etc/selinux/config
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/klox ... xo-mr.repo (https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo) --no-check-certificate
cd /root
yum install kloxomr
#ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup
sh /usr/local/lxlabs/kloxo/install/setup.sh
++++++
Installing packages tnef which gcc cpp gcc-c++ zip unzip curl autoconf automake
libtool openssl pure-ftpd yum-protectbase yum-plugin-replace crontabs net-snmp t
mpwatch rkhunter quota httpd mod_ssl mod_ruid2 mysql mysql-server lxphp lxlightt
pd php-mbstring php-mysql php-pdo php-imap php-pear php-gd php-pspell kloxomr-we
bmail-*.noarch kloxomr-addon-*.noarch kloxomr-thirdparty-*.noarch kloxomr-lang-*
...
.........
--> Processing Dependency: libcurl.so.3()(64bit) for package: php52-cli-5.2.17-6
.ius.el5.x86_64
--> Processing Conflict: php-mysql-5.3.23-1.el6.x86_64 conflicts php-mysqlnd
--> Finished Dependency Resolution
Error: Package: php52-5.2.17-6.ius.el5.x86_64 (kloxo-mr-ius-c5)
           Requires: libcurl.so.3()(64bit)
Error: Package: php52-cli-5.2.17-6.ius.el5.x86_64 (kloxo-mr-ius-c5)
           Requires: libcurl.so.3()(64bit)
Error: php-mysql conflicts with php54-mysqlnd-5.4.13-1.ius.el6.x86_64
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
++++

I hope you have some use for this info :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 00:57:45
There is and one new error from me on CentOS 5.9 32bit
Code: [Select]
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
  --> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-24, 03:14:12
Quote
A. Kloxo-MR: 6.5.0.f-2013031801
B. OS: CentOS release 6.4 (Final) i686
C. Apps:
   1. MySQL: MariaDB-server-10.0.1-1.i686
   2. PHP: php53u-5.3.23-1.ius.el6.i686
   3. Httpd: httpd-2.2.23-1.el6.i686
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.14-1.el6.i686
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.i686
   7. Dns: bind-9.9.2-2.P1.el6.i686
D. Php-type (for Httpd/proxy): php-fpm_event
Quote from: "MRatWork"
For VPS3 just running 'yum update kloxomr'

Yes. Just running 'yum update kloxomr'
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 04:40:46
2 new errors:
Code: [Select]
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/repodata/repomd.xml: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: kloxo-mr-release-neutral-noarch. Please verify its path and try again

Congratulations. Kloxo-MR has been installed succesfully as master

Code: [Select]
- Need running 'sh /script/cleanup' for update

- Better reboot for fresh install

Code: [Select]
[root@backupserver ~]# sh /script/cleanup

Turn off mouse daemon
- Turn off process
/script/cleanup: line 3:  9105 Terminated              lxphp.exe ../bin/common/cleanup.php
[root@backupserver ~]#

Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-24, 07:55:20
Quote from: "insanity"
There is and one new error from me on CentOS 5.9 32bit
Code: [Select]
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
  --> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...

fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-24, 08:02:03
Quote from: "dinar"
Quote from: "insanity"
There is and one new error from me on CentOS 5.9 32bit
Code: [Select]
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
  --> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...

fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"

Try install php-devel

yum install php-devel
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-24, 18:21:18
in fresh install, kloxo ip:7778 can't open

run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' still kloxo ip:7778 can't open

run 'sh /usr/local/lxlabs/kloxo/install/installer.sh'
Code: [Select]
Installing as "root"         OK
SELinux disabled             OK
Yum installed                OK
Could not open input file: installer.php

run '/script/cleanup' (after running 'chmod -R 777 /script/'), output :
Code: [Select]
/usr/bin/lxphp.exe: line 3:  1351 Segmentation fault      /usr/local/lxlabs/ext/
php/bin/php -c /usr/local/lxlabs/ext/php/etc/php.ini $*

run
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 18:23:45
Obviously there is a problem. Lets wait until Mustafa find a solution
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-24, 18:31:04
Quote from: "insanity"
Obviously there is a problem. Lets wait until Mustafa find a solution
folder '/usr/local/lxlabs/ext' not found

in /usr/local/lxlabs/kloxo/install/installer.sh :
Code: [Select]
..........
if [ -f /usr/local/lxlabs/ext/php/php ] ; then
lxphp.exe installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
else
php installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
.............
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-24, 20:01:25
Quote from: "ariefewweb"
Quote from: "insanity"
Obviously there is a problem. Lets wait until Mustafa find a solution
folder '/usr/local/lxlabs/ext' not found

in /usr/local/lxlabs/kloxo/install/installer.sh :
Code: [Select]
..........
if [ -f /usr/local/lxlabs/ext/php/php ] ; then
lxphp.exe installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
else
php installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
.............

You may try run manually :)

1. Make dir /usr/local/lxlabs/ext
2. Then download all content on that's folder from github. (

Imho maybe that's problem with isp or github :)

But I have try 5 server and working fine :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 20:10:54
@goblog

You install Kloxo-MR final on 5 fresh installed servers without problems ?

It's very strange for me... Dev kloxo work perfect, and installation was perfect. The final kloxo (eg final - better than candidate) have problems at the begining with installation...

P.S. I try on 3 different servers today.. Centos 5/6 + CloudLinux and get same problem...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-24, 20:22:12
really ?
who is succeded installing fresh install "final" or "Dev" version right now. ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-24, 21:13:47
Quote from: "goblog"
Quote from: "dinar"
Quote from: "insanity"
There is and one new error from me on CentOS 5.9 32bit
Code: [Select]
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
  --> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...

fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"

Try install php-devel

yum install php-devel

not working bro..

Code: [Select]
[root@din ~]# yum install php-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirror.serversurgeon.com
 * extras: mirror.sanctuaryhost.com
 * kloxo-mr-epel: fedora-epel.mirror.lstn.net
 * kloxo-mr-ius: mirror.rackspace.com
 * kloxo-mr-ius-c5: mirror.rackspace.com
 * updates: dist1.800hosting.com
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package php-devel.x86_64 0:5.3.3-22.el6 will be installed
--> Processing Dependency: php(x86-64) = 5.3.3-22.el6 for package: php-devel-5.3.3-22.el6.x86_64
--> Processing Dependency: automake for package: php-devel-5.3.3-22.el6.x86_64
--> Processing Dependency: autoconf for package: php-devel-5.3.3-22.el6.x86_64
--> Running transaction check
---> Package autoconf.noarch 0:2.63-5.1.el6 will be installed
---> Package automake.noarch 0:1.11.1-4.el6 will be installed
---> Package php-devel.x86_64 0:5.3.3-22.el6 will be installed
--> Processing Dependency: php(x86-64) = 5.3.3-22.el6 for package: php-devel-5.3.3-22.el6.x86_64
--> Finished Dependency Resolution
Error: Package: php-devel-5.3.3-22.el6.x86_64 (base)
           Requires: php(x86-64) = 5.3.3-22.el6
           Installed: php-5.3.23-1.el6.x86_64 (@kloxo-mr-centalt)
               php(x86-64) = 5.3.23-1.el6
           Available: php-5.3.3-22.el6.x86_64 (base)
               php(x86-64) = 5.3.3-22.el6
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
[root@din ~]#

not working bro..
Title: Re: Kloxo-Mr 6.5.0 f
Post by: nusapenida on 2013-03-24, 21:18:38
Quote from: "zenkul"
really ?
who is succeded installing fresh install "final" or "Dev" version right now. ?

none!
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-24, 21:59:19
I'm upgrade :)
Not fresh install heheehe
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 22:24:08
Quote from: "goblog"
I'm upgrade :)
Not fresh install heheehe


Yes upgrade work... but fresh install nope..
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-24, 22:26:58
someone may will borrow me your vps :D
i'll try it :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-24, 22:28:41
And GitHub is down on every 2 minutes :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-24, 22:55:01
Quote from: "goblog"
someone may will borrow me your vps :D
i'll try it :D

try for upgrade or fresh install? share in here bro so all friends can do
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-24, 22:59:46
Quote from: "dinar"
Quote from: "goblog"
someone may will borrow me your vps :D
i'll try it :D

try for upgrade or fresh install? share in here bro so all friends can do

i upgrade on my server working fine
tutorial same with mustafa wrote

Code: [Select]
B. For Final Release:

    # move repo dir
    cd /etc/yum.repos.d/

    # get repo file -- no need for 6.5.0.c and after
    wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate

    # move to /
    cd /

    # install (and then run 'setup.sh' instead 'installer.sh')
    yum install kloxomr
   
    # better reboot
    reboot


but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-24, 23:30:01
Quote from: "goblog"
but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me

ok wait, I will look for unused vps to try
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-24, 23:57:16
Quote from: "dinar"
Quote from: "goblog"
but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me

ok wait, I will look for unused vps to try

sent pm.. cek inbox..
Title: Re: Kloxo-Mr 6.5.0 f
Post by: GeorgeIdentNA on 2013-03-25, 16:37:14
Quote from: "insanity"
Quote from: "goblog"
I'm upgrade :)
Not fresh install heheehe


Yes upgrade work... but fresh install nope..

How can I install a older version of Kloxo-MR? I need this Control Panel to install now and the latest version is not installed :(
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-25, 18:17:45
Quote from: "mahs"
Quote from: "insanity"
Quote from: "goblog"
I'm upgrade :)
Not fresh install heheehe


Yes upgrade work... but fresh install nope..

How can I install a older version of Kloxo-MR? I need this Control Panel to install now and the latest version is not installed :(

Unfortunately no previous version with kloxo mr after upgrade
Title: Re: Kloxo-Mr 6.5.0 f
Post by: GeorgeIdentNA on 2013-03-25, 18:38:01
Fresh install works again, thanks M.R. :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-25, 19:53:15
Quote from: "mahs"
Fresh install works again, thanks M.R. :)


My try fault again :D
Kloxo try to install 3 times himself :) and run more than 4 yum at one time

Another app is currently holding the yum lock; waiting for it to exit...
  The other application is: yum
    Memory :  19 M RSS ( 28 MB VSZ)
    Started: Mon Mar 25 17:50:10 2013 - 00:04 ago
    State  : Running, pid: 4954
Another app is currently holding the yum lock; waiting for it to exit...
  The other application is: yum
    Memory :  24 M RSS ( 33 MB VSZ)
    Started: Mon Mar 25 17:50:10 2013 - 00:06 ago
    State  : Running, pid: 4954

EDIT: Installed and work after 4 try's :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-25, 21:18:52
success: fresh install at OpenVZ centos 5 32 bit

thanxs  :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Kloxouser5 on 2013-03-25, 21:45:47
Now work perfectly the installer.I tried on Centos5 -32 bit
Thanks to Mustafa!
Title: Re: Kloxo-Mr 6.5.0 f
Post by: zenkul on 2013-03-25, 21:54:37
look like (report from another)
all existing versions of centos works
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-26, 23:29:43
Fresh install kloxo-mr final in OpenVZ Centos 5 32 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

success
Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php-5.2.17-28.el5
   3. Httpd: httpd-2.2.23-3.el5
   4. Lighttpd: --uninstalled--
   5. Nginx: --uninstalled--
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy):
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-26, 23:49:24
Fresh install kloxo-mr final in OpenVZ Centos 5 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

success
Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) x86_64

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php-5.2.17-28.el5
   3. Httpd: httpd-2.2.23-3.el5
   4. Lighttpd: --uninstalled--
   5. Nginx: --uninstalled--
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy):
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-27, 00:03:28
Fresh install kloxo-mr final in OpenVZ Centos 6 32 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

error
Code: [Select]
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10
Error: Package: pure-ftpd-1.0.36-5.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4
Error: Package: 1:mod_ssl-2.2.23-3.el5.i386 (kloxo-mr-centalt)
           Requires: libnal.so.1
Error: Package: mysql-5.1.67-1.el6_3.i686 (updates)
           Requires: mysql-libs = 5.1.67-1.el6_3
           Installed: mysql-libs-5.5.29-1.el6.i686 (@kloxo-mr-centalt)
               mysql-libs = 5.5.29-1.el6
           Available: mysql-libs-5.1.66-2.el6_3.i686 (base)
               mysql-libs = 5.1.66-2.el6_3
           Available: mysql-libs-5.1.67-1.el6_3.i686 (updates)
               mysql-libs = 5.1.67-1.el6_3
           Available: mysql55-libs-5.5.30-1.ius.el5.i386 (kloxo-mr-ius)
               mysql-libs = 5.5.30-1.ius.el5
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3
Error: Package: 1:mod_ssl-2.2.23-3.el5.i386 (kloxo-mr-centalt)
           Requires: libdistcache.so.1
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.i686 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:

note: using the same vps above
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 00:14:24
I wasn't test on OpenVZ but KVM. So, no comment about OpenVZ for Centos 6.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-27, 00:17:18
Fresh install kloxo-mr final in OpenVZ Centos 6 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

error
Code: [Select]
Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libnal.so.1()(64bit)
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-27, 00:23:54
Upgrade kloxo-mr in OpenVZ & XEN (centos 5 32bit, centos 5 64 bit, centos 6 32 bit, centos 6 64 bit) with
- B
- chmod -R 777 /script/
- /script/cleanup

success
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dinar on 2013-03-27, 12:25:12
Quote from: "ariefewweb"
Fresh install kloxo-mr final in OpenVZ Centos 6 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

error
Code: [Select]
Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libnal.so.1()(64bit)
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:

try again bro, today i have same problem "yum gave error" for fresh install on xen vps, and try again "Y" and than successfully..
Title: Re: Kloxo-Mr 6.5.0 f
Post by: techpad on 2013-03-27, 14:53:50
Same problem here:

Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: mysql-server-5.1.67-1.el6_3.x86_64 (updates)
           Requires: mysql = 5.1.67-1.el6_3
           Installed: mysql-5.5.29-1.el6.x86_64 (@kloxo-mr-centalt)
               mysql = 5.5.29-1.el6
           Available: mysql-5.1.66-2.el6_3.x86_64 (base)
               mysql = 5.1.66-2.el6_3
           Available: mysql-5.1.67-1.el6_3.x86_64 (updates)
               mysql = 5.1.67-1.el6_3
           Available: mysql50-5.0.96-2.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.0.96-2.ius.el5
           Available: mysql51-5.1.68-1.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.1.68-1.ius.el5
           Available: mysql55-5.5.30-1.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.5.30-1.ius.el5
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libnal.so.1()(64bit)
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 15:09:04
What's kloxomr final version?. Early version Final 6.5.0.f-2013031801 have a problem about it. Try 'yum update kloxomr' first.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: techpad on 2013-03-27, 15:24:24
Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:

Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 15:28:49
Quote from: "techpad"
Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:

Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]
Have you run 'sh /script/cleanup' after update to 6.5.0.f?. Better reboot also.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-27, 15:40:01
hello.
i try fresh install to my server and run this command

Code: [Select]
A.2. Install/reinstall/upgrade -- data not destroyed with this fork -
     for existing kloxo (6.1.x), run 'sh /script/update' first.

    # delete if exist, create kloxo temp dir
    rm -rf /tmp/kloxo; mkdir /tmp/kloxo ; cd /tmp/kloxo;

    rm -f ./kloxo-mr-dev.sh

    # get kloxo-mr-dev installer from github
    wget https://github.com/mustafaramadhan/kloxo/raw/dev/kloxo/install/kloxo-mr-dev.sh --no-check-certificate

    # install kloxo
    sh ./kloxo-mr-dev.sh
   
    # better reboot
    reboot

but thats not work properly, and always error install.sh / installer.php

but when i try

Code: [Select]
B. For Final Release:

    # move repo dir
    cd /etc/yum.repos.d/

    # get repo file -- no need for 6.5.0.c and after
    wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate

    # move to /
    cd /

    # install (and then run 'setup.sh' instead 'installer.sh')
    yum install kloxomr
   
    # better reboot
    reboot



thats work like charm, i dont know where is problem :D
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 15:56:32
At this moment A.2 step as 6.5.1.a (alpha step; unstable; for next version of Kloxo-MR) and B step for 6.5.0.f (stable; rpm format).
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 15:59:41
So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).
Title: Re: Kloxo-Mr 6.5.0 f
Post by: prandah on 2013-03-27, 18:10:16
Quote from: "MRatWork"
So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).

IMHO I agree with you sir :)
For this version just fix bug if any :)
But sir, when install kloxo I found varnish instalation,,
For what that's ? And how to enable it?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 18:19:18
Varnish and hiawata and httpd 2.4 will be ready on 6.5.1. So until now, need a trick to make varnish running well on Kloxo-MR 6.5.0.

On 6.5.1, enable and disable varnish already in panel!.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: AuroraZero on 2013-03-27, 20:12:59
Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.

What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.

Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?

Thank you for keeping this product alive man.

Shawn
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 20:24:46
Quote from: "AuroraZero"
Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.

What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.

Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?

Thank you for keeping this product alive man.

Shawn
Impossible use low ram if using centos 6 because latest version of mysql (5.5.x) need enable innodb.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: AuroraZero on 2013-03-27, 20:44:18
I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 20:54:28
Quote from: "AuroraZero"
I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.
So, inform here your 'sh /script/sysinfo'
Title: Re: Kloxo-Mr 6.5.0 f
Post by: AuroraZero on 2013-03-27, 21:09:07
Code: [Select]
sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php53u-5.3.23-1.ius.el5
   3. Httpd: --uninstalled--
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy): mod_php_ruid2

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           256        181         74          0          0        100
   -/+ buffers/cache:         81        174
   Swap:            0          0          0

I have Bind turned off I do not handle DNS on my boxes.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-27, 21:36:32
Quote from: "AuroraZero"
Code: [Select]
sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php53u-5.3.23-1.ius.el5
   3. Httpd: --uninstalled--
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy): mod_php_ruid2

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           256        181         74          0          0        100
   -/+ buffers/cache:         81        174
   Swap:            0          0          0

I have Bind turned off I do not handle DNS on my boxes.
So, you don't use php-fpm. For to make sure, run 'yum remove php53u-fpm'.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: AuroraZero on 2013-03-27, 21:49:15
Code: [Select]
yum remove php53u-fpm
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Remove Process
No Match for argument: php53u-fpm
Loading mirror speeds from cached hostfile
 * base: mirror.ubiquityservers.com
 * extras: mirror.sanctuaryhost.com
 * kloxo-mr-epel: mirror.steadfast.net
 * kloxo-mr-ius: dl.iuscommunity.org
 * kloxo-mr-ius-c5: dl.iuscommunity.org
 * updates: mirror.cogentco.com
base                                                                          | 1.1 kB     00:00    
extras                                                                        | 2.1 kB     00:00    
kloxo-mr-centalt                                                              |  951 B     00:00    
kloxo-mr-centosec                                                             | 2.5 kB     00:00    
kloxo-mr-epel                                                                 | 3.6 kB     00:00    
kloxo-mr-ius                                                                  | 2.2 kB     00:00    
kloxo-mr-ius-c5                                                               | 2.2 kB     00:00    
kloxo-mr-nginx                                                                | 1.2 kB     00:00    
kloxo-mr-release-neutral-arch                                                 | 1.9 kB     00:00    
kloxo-mr-release-neutral-noarch                                               | 1.9 kB     00:00    
kloxo-mr-release-version-arch                                                 | 1.9 kB     00:00    
kloxo-mr-release-version-noarch                                               | 1.9 kB     00:00    
kloxo-mr-varnish-3.0                                                          |  951 B     00:00    
updates                                                                       | 1.9 kB     00:00    
Excluding Packages from Kloxo-MR - centalt - i386
Finished
Excluding Packages from Kloxo-MR - IUS Community Packages for EL 5 - i386
Finished
Reducing Kloxo-MR - IUS Community Packages for EL 5 (special) - i386 to included packages only
Finished
0 packages excluded due to repository protections
Package(s) php53u-fpm available, but not installed.
No Packages marked for removal

It is not installed on this box, but as you can see with this setup it is using  a lot of ram. This is a clean install and no sites are even configured on it. Not even a domain is configured yet.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-27, 22:11:33
Quote from: "AuroraZero"
Code: [Select]
sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php53u-5.3.23-1.ius.el5
   3. Httpd: --uninstalled--
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy): mod_php_ruid2

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           256        181         74          0          0        100
   -/+ buffers/cache:         81        174
   Swap:            0          0          0

I have Bind turned off I do not handle DNS on my boxes.


actually it use only 81MB ram.. The rest is cached.. not used
Title: Re: Kloxo-Mr 6.5.0 f
Post by: AuroraZero on 2013-03-27, 22:37:36
I understand it is cached but Solus does not care. Does not matter. I will give up and find another solution. It will be fine. :)
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-27, 22:42:24
Quote from: "AuroraZero"
I understand it is cached but Solus does not care. Does not matter. I will give up and find another solution. It will be fine. :)

Add crontab with this:
Code: [Select]
sync; echo 3 > /proc/sys/vm/drop_cacheson every hours or as you decide and this will clear the cache.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: TriRan on 2013-03-28, 01:33:09
Code: [Select]
[root@server2 /]# yum install kloxomr
Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
 * addons: mirror.steadfast.net
 * base: mirror.steadfast.net
 * extras: mirror.nexcess.net
 * kloxo-mr-epel: mirrors.servercentral.net
 * kloxo-mr-ius: dl.iuscommunity.org
 * kloxo-mr-ius-c5: dl.iuscommunity.org
 * updates: mirror.nexcess.net
Excluding Packages from Kloxo-MR - centalt - i386
Finished
Excluding Packages from Kloxo-MR - IUS Community Packages for EL 5 - i386
Finished
Reducing Kloxo-MR - IUS Community Packages for EL 5 (special) - i386 to included packages only
Finished
0 packages excluded due to repository protections
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package kloxomr.noarch 0:6.5.0.f-2013031806.mr set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package  Arch    Version                Repository                        Size
================================================================================
Installing:
 kloxomr  noarch  6.5.0.f-2013031806.mr  kloxo-mr-release-neutral-noarch  6.1 M

Transaction Summary
================================================================================
Install       1 Package(s)
Upgrade       0 Package(s)

Total download size: 6.1 M
Is this ok [y/N]: y
Downloading Packages:
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031806.mr.noarch.rpm: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.


Error Downloading Packages:
  kloxomr-6.5.0.f-2013031806.mr.noarch: failure: kloxomr-6.5.0.f-2013031806.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.

[root@server2 /]#

even tried to reach the file from my home pc and get a 404 error when trying to install final
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-28, 01:38:19
Try again because sometimes have a trouble on github connections.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-03-28, 01:42:44
Quote from: "MRatWork"
Try again because sometimes have a trouble on github connections.

update kloxomr-6.5.0.f based-on 6.5.1.a-2013032701

@Mustafa you update final or ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-03-28, 02:01:01
Quote from: "insanity"
Quote from: "MRatWork"
Try again because sometimes have a trouble on github connections.

update kloxomr-6.5.0.f based-on 6.5.1.a-2013032701

@Mustafa you update final or ?
Yes
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-31, 06:48:26
Now fresh install kloxo-mr final in centos 6 success
And install MariaDB successful too  :D
Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031808

B. OS: CentOS release 6.4 (Final) i686

C. Apps:
   1. MySQL: MariaDB-server-10.0.1-1.i686
   2. PHP: php53u-5.3.23-1.ius.el6.i686
   3. Httpd: httpd-2.2.23-1.el6.i686
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el6.i686
   6. Qmail: --uninstalled--
   7. Dns: bind-9.9.2-2.P1.el6.i686

D. Php-type (for Httpd/proxy): php-fpm_event

(http://img521.imageshack.us/img521/6499/e0373677683245e2acf1122.png)
Thanks Om MR
Title: Re: Kloxo-Mr 6.5.0 f
Post by: ariefewweb on 2013-03-31, 07:05:46
Now fresh install kloxo-mr final (OpenVZ) in centos 6 success
And install MariaDB successful too  :D
Code: [Select]
A. Kloxo-MR: 6.5.0.f-2013031808

B. OS: CentOS release 6.4 (Final) i686

C. Apps:
   1. MySQL: MariaDB-server-10.0.1-1.i686
   2. PHP: php53u-5.3.23-1.ius.el6.i686
   3. Httpd: httpd-2.2.23-1.el6.i686
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el6.i686
   6. Qmail: --uninstalled--
   7. Dns: bind-9.9.2-2.P1.el6.i686

D. Php-type (for Httpd/proxy): php-fpm_event
(http://img521.imageshack.us/img521/6499/e0373677683245e2acf1122.png)
Thanks Om MR
Title: Re: Kloxo-Mr 6.5.0 f
Post by: TriRan on 2013-04-03, 04:13:56
i updated my 3 servers to kloxo-mr final and under the services list for both slaves they have no services listed at all
but the master does
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-04-06, 20:25:13
Does quota works for you on final ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: insanity on 2013-04-08, 23:03:18
yum update kloxomr not work

Downloading Packages:
https://github.com/mustafaramadhan/klox ... noarch.rpm (https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031809.mr.noarch.rpm): [Errno 14] HTTP Error 404: Not Found
Trying other mirror.


Error Downloading Packages:
  kloxomr-6.5.0.f-2013031809.mr.noarch: failure: kloxomr-6.5.0.f-2013031809.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-04-08, 23:22:51
Quote from: "insanity"
yum update kloxomr not work

Downloading Packages:
https://github.com/mustafaramadhan/klox ... noarch.rpm (https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031809.mr.noarch.rpm): [Errno 14] HTTP Error 404: Not Found
Trying other mirror.


Error Downloading Packages:
  kloxomr-6.5.0.f-2013031809.mr.noarch: failure: kloxomr-6.5.0.f-2013031809.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.
Yes, have a trouble when update rpm. Now, re-upload in progress.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: TriRan on 2013-04-23, 03:26:02
what would cause the services list to be blank on both my slave servers? on my master its working fine under 6.5.0f
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-04-23, 03:42:05
Did you run /script/cleanup ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: TriRan on 2013-04-23, 11:58:02
Yes I ran that on all 3 servers
Title: Re: Kloxo-Mr 6.5.0 f
Post by: Spacedust on 2013-04-23, 23:47:27
Quote from: "TriRan"
Yes I ran that on all 3 servers

Please post /script/sysinfo
Title: Re: Kloxo-Mr 6.5.0 f
Post by: TriRan on 2013-04-24, 01:23:07
server1 (mysql)
Code: [Select]
[root@server1 ~]# sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031808

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql55-5.5.30-1.ius.el5
   2. PHP: php-5.2.17-29.el5
   3. Httpd: --uninstalled--
   4. Lighttpd: lighttpd-1.4.32-1.el5
   5. Nginx: --uninstalled--
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-3.P2.el5

D. Php-type (for Httpd/proxy):

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:          2048        955       1092          0          0          0
   -/+ buffers/cache:        955       1092
   Swap:            0          0          0
server2
Code: [Select]
[root@server2 ~]# sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031807

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql55-5.5.30-1.ius.el5
   2. PHP: php54-5.4.13-1.ius.el5
   3. Httpd: httpd-2.2.23-3.el5
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-3.P2.el5

D. Php-type (for Httpd/proxy): php-fpm_worker

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:          2048        372       1675          0          0          0
   -/+ buffers/cache:        372       1675
   Swap:            0          0          0
server3
Code: [Select]
[root@server3 ~]# sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031808

B. OS: CentOS release 6.3 (Final) x86_64

C. Apps:
   1. MySQL: mysql-5.5.29-1.el6.x86_64
   2. PHP: php54-5.4.13-1.ius.el6.x86_64
   3. Httpd: httpd-2.2.23-1.el6.x86_64
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el6.x86_64
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64
   7. Dns: bind-9.9.2-2.P1.el6.x86_64

D. Php-type (for Httpd/proxy): php-fpm_worker

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:          2048        230       1817          0          0        137
   -/+ buffers/cache:         92       1955
   Swap:            0          0          0
Title: Re: Kloxo-Mr 6.5.0 f
Post by: dpnux on 2013-04-25, 23:17:44
I do have same problem, my master can't read slave services. Another problem, I can't choose php type from web server config.

All server updated to Kloxo-MR: 6.5.0.f-2013031810 by yum update command.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: z3g3r on 2013-05-16, 23:00:17
always gave me error

Code: [Select]
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/repodata/primary.sqlite.bz2: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.

fresh install or update, can anyone help me to find solutions ?

thanks
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-05-17, 01:12:27
Nothing problem for installed 15 minutes ago.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: z3g3r on 2013-05-17, 01:19:03
Quote from: "MRatWork"
Nothing problem for installed 15 minutes ago.

for fresh install or upgrade ?
Title: Re: Kloxo-Mr 6.5.0 f
Post by: MRatWork on 2013-05-22, 05:05:45
If I talk 'install' that mean 'fresh install' and 'update' that mean update from previous Kloxo-MR version.
Title: Re: Kloxo-Mr 6.5.0 f
Post by: lupetalo on 2013-05-28, 05:06:14
Mail broken after update, viewtopic.php?f=5&t=18826 (http://forum.mratwork.com/viewtopic.php?f=5&t=18826) ,
smtp and pop3 auth always fail...