MRatWork Forum by Mustafa Ramadhan
Sawo Project - Kloxo-MR Discussions => Kloxo-MR Releases => Topic started by: dfreddie on 2013-03-19, 02:11:09
-
There is a real "How To" for install this final version?
Thanks.
-
As i see its still not released. Wait a couple of hours, and i believe Mustafa will announce.
-
maybe mustafa will release soon
because him had problem with network, cant upload big size to github (thats problem with our ISP)
-
hello
if the final version is uploaded ?
how to upgrade via ssh ?
Thanks ;)
-
not update :D
-
We all wait. It's a conspiracy... exactly on the day of release...., ISP have problems.
Just a joke :)
-
Now seriously. Approximately when (f) will be uploaded?
-
Now seriously. Approximately when (f) will be uploaded?
Ask to my internet provider (telkom.net.id) when their internet connection back to normal (especially to europe).
-
Now seriously. Approximately when (f) will be uploaded?
Ask to my internet provider (telkom.net.id) when their internet connection back to normal (especially to europe).
Change ISP Mustafa...
-
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(
-
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(
What kind of speed you can get ? We can get up to 100 Mbps on cable modem or 250 Mbps download via fiber in some locations only - bandwidth is of course unlimited ;)
-
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.
Thank you very much for the final update. :)
-
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.
Thank you very much for the final update. :)
There is no final yet. The latest is: Kloxo-MR 6.5.0.c.2013031710
-
On indonesia, just this ISP cheaper then other :)
If change ISP, there are a lot of ISP with expensive price :)
Ex: biznet. I don't know why bandwith on indonesia very very expensive :(
What kind of speed you can get ? We can get up to 100 Mbps on cable modem or 250 Mbps download via fiber in some locations only - bandwidth is of course unlimited ;)
on my speed via cable just get 2Mbps :hammer:
here is the price about my provider (Telkomspeedy)
(http://telkomspeedy.com/sites/default/files/paket%20maret%202012_2.png)
rate usd to idr is = 10,000
you can calculate it :D
-
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.
Thank you very much for the final update. :)
for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file
-
Mustafa please disable collecquota in scavenge. It takes a lot of time to count something that does not work !
-
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.
Thank you very much for the final update. :)
for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file
I ask Mustafa, if he want to give him a VPS not located in EU (the problem zone), with GitHub installed, so he can upload the kloxo directly from that vps. Unfortunately i don't get answer :)
-
Now, I will proceed to install Kloxo-MR 6.5.0 final version and also update my old kloxo panel.
Thank you very much for the final update. :)
for now there is no final version for kloxo :)
latest version still candidate :D
waiting admin for complete upload file
I ask Mustafa, if he want to give him a VPS not located in EU (the problem zone), with GitHub installed, so he can upload the kloxo directly from that vps. Unfortunately i don't get answer :)
Yes, he should get one. At least with 100 Mbps link ;)
-
There is nothing we can do...
-
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)
-
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)
We've got fiber cut in our biggest ISP right here in Poland which almost offlined whole city, but they've fixed this in 2 hours time :) People were shouting like crazy on their Facebook page.
-
I start thinking that Mustafa is not ready with this release :) I'm from Bulgaria and even here our ISP fix problem within 3 days max. This problem is from 1 week now... :)
We've got fiber cut in our biggest ISP right here in Poland which almost offlined whole city, but they've fixed this in 2 hours time :) People were shouting like crazy on their Facebook page.
Yes 1-3 days are normal for serious problem... But one week.. without some announce from the dev it is a little bit strange...
-
Finally it's released !
-
Finally it's released !
Yes and its a testing time :D
-
Finally it's released !
Yes and its a testing time :D
yum install kloxomr
-
Not working - displays 500 - Internal Server Error on Kloxo page... :/
Updating from latest candidate.
-
I even can't install it
-
Upgrade from Kloxo-MR 6.5.0c success :D
(http://img266.imageshack.us/img266/6008/abf9440df03742419917536.png)
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
cd /
yum install kloxomr
reboot
displays 500 - Internal Server Error on Kloxo page
use:
chmod -R 777 /script/
/script/cleanup
-
@ariefewweb,
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after update (before reboot)?.
-
@ariefewweb,
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after update (before reboot)?.
I just run (for update 5 vps):
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
cd /
yum install kloxomr
chmod -R 777 /script/
/script/cleanup
reboot
:D
-
If our 'yum install kloxomr' or 'yum update kloxomr' (depend on situation) we will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' on bottom. So, running this script.
-
vps 1
A. Kloxo-MR: 6.5.0.f-2013031802
B. OS: CentOS release 6.4 (Final) x86_64
C. Apps:
1. MySQL: mysql-5.5.29-1.el6.x86_64
2. PHP: php53u-5.3.23-1.ius.el6.x86_64
3. Httpd: httpd-2.2.23-1.el6.x86_64
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.14-1.el6.x86_64
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64
7. Dns: --uninstalled--
D. Php-type (for Httpd/proxy): php-fpm_event
VPS 2
A. Kloxo-MR: 6.5.0.f-2013031802
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php53u-5.3.23-1.ius.el5
3. Httpd: httpd-2.2.23-3.el5
4. Lighttpd: --uninstalled--
5. Nginx: nginx-special-1.3.11-2.mr.el5
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy): mod_php_ruid2
VPS 3
A. Kloxo-MR: 6.5.0.f-2013031801
B. OS: CentOS release 6.4 (Final) i686
C. Apps:
1. MySQL: MariaDB-server-10.0.1-1.i686
2. PHP: php53u-5.3.23-1.ius.el6.i686
3. Httpd: httpd-2.2.23-1.el6.i686
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.14-1.el6.i686
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.i686
7. Dns: bind-9.9.2-2.P1.el6.i686
D. Php-type (for Httpd/proxy): php-fpm_event
Thanks @mustafaramadhan
#sembahsungkem
-
For VPS3 just running 'yum update kloxomr'
-
Problem with installer:
./installer.sh: line 157: $1: ambiguous redirect
./installer.sh: line 158: $1: ambiguous redirect
./installer.sh: line 159: $1: ambiguous redirect
Could not open input file: installer.php
-
Problem with installer:
./installer.sh: line 157: $1: ambiguous redirect
./installer.sh: line 158: $1: ambiguous redirect
./installer.sh: line 159: $1: ambiguous redirect
Could not open input file: installer.php
What's going on still using installer.sh (in this context only for development step).
Kloxo-MR 6.5.0.f is a final release where using 'yum install kloxomr'.
-
YUM Gave Error... Trying Again...
-
after update
then run sh /script/cleanup
all site 404 notfound
-
YUM Gave Error... Trying Again...
complete error report: fresh install final version (64/62 bit)
--> Finished Dependency Resolution
Error: Package: php-imap-5.3.3-22.el6.i686 (base)
Requires: php-common(x86-32) = 5.3.3-22.el6
Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
php-common(x86-32) = 5.3.23-1.el6
Available: php-common-5.3.3-22.el6.i686 (base)
php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-pspell-5.3.3-22.el6.i686 (base)
Requires: php-common(x86-32) = 5.3.3-22.el6
Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
php-common(x86-32) = 5.3.23-1.el6
Available: php-common-5.3.3-22.el6.i686 (base)
php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-gd-5.3.3-22.el6.i686 (base)
Requires: php-common(x86-32) = 5.3.3-22.el6
Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
php-common(x86-32) = 5.3.23-1.el6
Available: php-common-5.3.3-22.el6.i686 (base)
php-common(x86-32) = 5.3.3-22.el6
Error: Package: php-mbstring-5.3.3-22.el6.i686 (base)
Requires: php-common(x86-32) = 5.3.3-22.el6
Installed: php-common-5.3.23-1.el6.i686 (@kloxo-mr-centalt)
php-common(x86-32) = 5.3.23-1.el6
Available: php-common-5.3.3-22.el6.i686 (base)
php-common(x86-32) = 5.3.3-22.el6
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.i686 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
-
after update
then run sh /script/cleanup
all site 404 notfound
fix after reboot
-
@zenkul,
Fresh install or update?
-
same error for me and i was doing fresh install.
-
@zenkul,
Fresh install or update?
fresh install centos 6 62 & 32 bit (same error)
-
all tutorial install and fix kloxo 6.5 final internal server error :o
-
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
-
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download :D
-
Thank you Zenkul ! I'll try again.
-
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download :D
Happened with me too tried again same problem.
-
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
-
Yes i try to 2 fresh installed servers CentOS 5.9 32 and 64 bits. Same problem. I can't install final.
But if i install Kloxo Official first and then update to kloxo-mr everything work
-
Yes i try to 2 fresh installed servers CentOS 5.9 32 and 64 bits. Same problem. I can't install final.
But if i install Kloxo Official first and then update to kloxo-mr everything work
thank you, how can I update from official kloxo to kloxo-mr?
-
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after 'yum install kloxomr'?.
You will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' at the end of 'yum install kloxomr'.
-
On fresh install appear:
Could not open input file: installer.php
and the installer is stopped.
for these problem, maybe internet connection related : file not completely download :D
Happened with me too tried again same problem.
sorry, me to : at Dev Version installation
-
Look like have a problem on centos and epel repo. Maybe they still in update process.
-
I tried to install Kloxo-RM for several times on OpenVZ VPS but login page failed to load!
Have been instaled Kloxo-RM on OpenVZ?
Have you run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' after 'yum install kloxomr'?.
You will see 'ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup' at the end of 'yum install kloxomr'.
Thank you :) , after I run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' I got 'YUM Gave Error...'
How can I resolve this problem?
-
My latest test, there are something wrong with centalt and epel repo. Maybe why we found 'YUM Error'.
I am still investigation about it because before release Final 6.5.0.f-2013031802 I was testing on fresh install and running well.
-
I try to install a fresh install and get the same error...
==== my install info
directspace.net - OpenVZ - RAM 1gb - HD 30gb
centos 6.4 64bit
root login
cd /root
yum update
yum install yum-utils yum-priorities vim-minimal subversion curl zip unzip
yum install telnet
setenforce 0
echo 'SELINUX=disabled' > /etc/selinux/config
cd /etc/yum.repos.d/
wget https://github.com/mustafaramadhan/klox ... xo-mr.repo (https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo) --no-check-certificate
cd /root
yum install kloxomr
#ATTN: Run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' completely setup
sh /usr/local/lxlabs/kloxo/install/setup.sh++++++
Installing packages tnef which gcc cpp gcc-c++ zip unzip curl autoconf automake
libtool openssl pure-ftpd yum-protectbase yum-plugin-replace crontabs net-snmp t
mpwatch rkhunter quota httpd mod_ssl mod_ruid2 mysql mysql-server lxphp lxlightt
pd php-mbstring php-mysql php-pdo php-imap php-pear php-gd php-pspell kloxomr-we
bmail-*.noarch kloxomr-addon-*.noarch kloxomr-thirdparty-*.noarch kloxomr-lang-*
...
.........
--> Processing Dependency: libcurl.so.3()(64bit) for package: php52-cli-5.2.17-6
.ius.el5.x86_64
--> Processing Conflict: php-mysql-5.3.23-1.el6.x86_64 conflicts php-mysqlnd
--> Finished Dependency Resolution
Error: Package: php52-5.2.17-6.ius.el5.x86_64 (kloxo-mr-ius-c5)
Requires: libcurl.so.3()(64bit)
Error: Package: php52-cli-5.2.17-6.ius.el5.x86_64 (kloxo-mr-ius-c5)
Requires: libcurl.so.3()(64bit)
Error: php-mysql conflicts with php54-mysqlnd-5.4.13-1.ius.el6.x86_64
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
++++
I hope you have some use for this info :)
-
There is and one new error from me on CentOS 5.9 32bit
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
--> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...
-
A. Kloxo-MR: 6.5.0.f-2013031801
B. OS: CentOS release 6.4 (Final) i686
C. Apps:
1. MySQL: MariaDB-server-10.0.1-1.i686
2. PHP: php53u-5.3.23-1.ius.el6.i686
3. Httpd: httpd-2.2.23-1.el6.i686
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.14-1.el6.i686
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.i686
7. Dns: bind-9.9.2-2.P1.el6.i686
D. Php-type (for Httpd/proxy): php-fpm_event
For VPS3 just running 'yum update kloxomr'
Yes. Just running 'yum update kloxomr'
-
2 new errors:
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/repodata/repomd.xml: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: kloxo-mr-release-neutral-noarch. Please verify its path and try again
Congratulations. Kloxo-MR has been installed succesfully as master
- Need running 'sh /script/cleanup' for update
- Better reboot for fresh install
[root@backupserver ~]# sh /script/cleanup
Turn off mouse daemon
- Turn off process
/script/cleanup: line 3: 9105 Terminated lxphp.exe ../bin/common/cleanup.php
[root@backupserver ~]#
-
There is and one new error from me on CentOS 5.9 32bit
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
--> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...
fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"
-
There is and one new error from me on CentOS 5.9 32bit
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
--> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...
fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"
Try install php-devel
yum install php-devel
-
in fresh install, kloxo ip:7778 can't open
run 'sh /usr/local/lxlabs/kloxo/install/setup.sh' still kloxo ip:7778 can't open
run 'sh /usr/local/lxlabs/kloxo/install/installer.sh'
Installing as "root" OK
SELinux disabled OK
Yum installed OK
Could not open input file: installer.php
run '/script/cleanup' (after running 'chmod -R 777 /script/'), output :
/usr/bin/lxphp.exe: line 3: 1351 Segmentation fault /usr/local/lxlabs/ext/
php/bin/php -c /usr/local/lxlabs/ext/php/etc/php.ini $*
run
-
Obviously there is a problem. Lets wait until Mustafa find a solution
-
Obviously there is a problem. Lets wait until Mustafa find a solution
folder '/usr/local/lxlabs/ext' not found
in /usr/local/lxlabs/kloxo/install/installer.sh :
..........
if [ -f /usr/local/lxlabs/ext/php/php ] ; then
lxphp.exe installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
else
php installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
.............
-
Obviously there is a problem. Lets wait until Mustafa find a solution
folder '/usr/local/lxlabs/ext' not found
in /usr/local/lxlabs/kloxo/install/installer.sh :
..........
if [ -f /usr/local/lxlabs/ext/php/php ] ; then
lxphp.exe installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
else
php installer.php --install-type=$APP_TYPE $* | tee kloxo-mr_install.log
.............
You may try run manually :)
1. Make dir /usr/local/lxlabs/ext
2. Then download all content on that's folder from github. (
Imho maybe that's problem with isp or github :)
But I have try 5 server and working fine :)
-
@goblog
You install Kloxo-MR final on 5 fresh installed servers without problems ?
It's very strange for me... Dev kloxo work perfect, and installation was perfect. The final kloxo (eg final - better than candidate) have problems at the begining with installation...
P.S. I try on 3 different servers today.. Centos 5/6 + CloudLinux and get same problem...
-
really ?
who is succeded installing fresh install "final" or "Dev" version right now. ?
-
There is and one new error from me on CentOS 5.9 32bit
--> Finished Dependency Resolution
php-devel-5.1.6-39.el5_8.i386 from base has depsolving problems
--> Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
Error: Missing Dependency: php = 5.1.6-39.el5_8 is needed by package php-devel-5.1.6-39.el5_8.i386 (base)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
YUM Gave Error... Trying Again...
fresh install on centos 6.3 64bit, i have same problem.. that is "YUM Gave error"
Try install php-devel
yum install php-devel
not working bro..
[root@din ~]# yum install php-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.serversurgeon.com
* extras: mirror.sanctuaryhost.com
* kloxo-mr-epel: fedora-epel.mirror.lstn.net
* kloxo-mr-ius: mirror.rackspace.com
* kloxo-mr-ius-c5: mirror.rackspace.com
* updates: dist1.800hosting.com
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package php-devel.x86_64 0:5.3.3-22.el6 will be installed
--> Processing Dependency: php(x86-64) = 5.3.3-22.el6 for package: php-devel-5.3.3-22.el6.x86_64
--> Processing Dependency: automake for package: php-devel-5.3.3-22.el6.x86_64
--> Processing Dependency: autoconf for package: php-devel-5.3.3-22.el6.x86_64
--> Running transaction check
---> Package autoconf.noarch 0:2.63-5.1.el6 will be installed
---> Package automake.noarch 0:1.11.1-4.el6 will be installed
---> Package php-devel.x86_64 0:5.3.3-22.el6 will be installed
--> Processing Dependency: php(x86-64) = 5.3.3-22.el6 for package: php-devel-5.3.3-22.el6.x86_64
--> Finished Dependency Resolution
Error: Package: php-devel-5.3.3-22.el6.x86_64 (base)
Requires: php(x86-64) = 5.3.3-22.el6
Installed: php-5.3.23-1.el6.x86_64 (@kloxo-mr-centalt)
php(x86-64) = 5.3.23-1.el6
Available: php-5.3.3-22.el6.x86_64 (base)
php(x86-64) = 5.3.3-22.el6
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
[root@din ~]#
not working bro..
-
really ?
who is succeded installing fresh install "final" or "Dev" version right now. ?
none!
-
I'm upgrade :)
Not fresh install heheehe
-
I'm upgrade :)
Not fresh install heheehe
Yes upgrade work... but fresh install nope..
-
someone may will borrow me your vps :D
i'll try it :D
-
And GitHub is down on every 2 minutes :D
-
someone may will borrow me your vps :D
i'll try it :D
try for upgrade or fresh install? share in here bro so all friends can do
-
someone may will borrow me your vps :D
i'll try it :D
try for upgrade or fresh install? share in here bro so all friends can do
i upgrade on my server working fine
tutorial same with mustafa wrote
B. For Final Release:
# move repo dir
cd /etc/yum.repos.d/
# get repo file -- no need for 6.5.0.c and after
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
# move to /
cd /
# install (and then run 'setup.sh' instead 'installer.sh')
yum install kloxomr
# better reboot
reboot
but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me
-
but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me
ok wait, I will look for unused vps to try
-
but i'll try fresh install :D but i dont have any server again :D
maybe you will borrow me ?
just for test. please send detail to me
ok wait, I will look for unused vps to try
sent pm.. cek inbox..
-
I'm upgrade :)
Not fresh install heheehe
Yes upgrade work... but fresh install nope..
How can I install a older version of Kloxo-MR? I need this Control Panel to install now and the latest version is not installed :(
-
I'm upgrade :)
Not fresh install heheehe
Yes upgrade work... but fresh install nope..
How can I install a older version of Kloxo-MR? I need this Control Panel to install now and the latest version is not installed :(
Unfortunately no previous version with kloxo mr after upgrade
-
Fresh install works again, thanks M.R. :)
-
Fresh install works again, thanks M.R. :)
My try fault again :D
Kloxo try to install 3 times himself :) and run more than 4 yum at one time
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: yum
Memory : 19 M RSS ( 28 MB VSZ)
Started: Mon Mar 25 17:50:10 2013 - 00:04 ago
State : Running, pid: 4954
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: yum
Memory : 24 M RSS ( 33 MB VSZ)
Started: Mon Mar 25 17:50:10 2013 - 00:06 ago
State : Running, pid: 4954
EDIT: Installed and work after 4 try's :)
-
success: fresh install at OpenVZ centos 5 32 bit
thanxs :D
-
Now work perfectly the installer.I tried on Centos5 -32 bit
Thanks to Mustafa!
-
look like (report from another)
all existing versions of centos works
-
Fresh install kloxo-mr final in OpenVZ Centos 5 32 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh
success
A. Kloxo-MR: 6.5.0.f-2013031806
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php-5.2.17-28.el5
3. Httpd: httpd-2.2.23-3.el5
4. Lighttpd: --uninstalled--
5. Nginx: --uninstalled--
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy):
-
Fresh install kloxo-mr final in OpenVZ Centos 5 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh
success
A. Kloxo-MR: 6.5.0.f-2013031806
B. OS: CentOS release 5.9 (Final) x86_64
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php-5.2.17-28.el5
3. Httpd: httpd-2.2.23-3.el5
4. Lighttpd: --uninstalled--
5. Nginx: --uninstalled--
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy):
-
Fresh install kloxo-mr final in OpenVZ Centos 6 32 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh
error
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libcurl.so.3
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libnetsnmp.so.10
Error: Package: pure-ftpd-1.0.36-5.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libpq.so.4
Error: Package: 1:mod_ssl-2.2.23-3.el5.i386 (kloxo-mr-centalt)
Requires: libnal.so.1
Error: Package: mysql-5.1.67-1.el6_3.i686 (updates)
Requires: mysql-libs = 5.1.67-1.el6_3
Installed: mysql-libs-5.5.29-1.el6.i686 (@kloxo-mr-centalt)
mysql-libs = 5.5.29-1.el6
Available: mysql-libs-5.1.66-2.el6_3.i686 (base)
mysql-libs = 5.1.66-2.el6_3
Available: mysql-libs-5.1.67-1.el6_3.i686 (updates)
mysql-libs = 5.1.67-1.el6_3
Available: mysql55-libs-5.5.30-1.ius.el5.i386 (kloxo-mr-ius)
mysql-libs = 5.5.30-1.ius.el5
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libpq.so.4
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libltdl.so.3
Error: Package: 1:mod_ssl-2.2.23-3.el5.i386 (kloxo-mr-centalt)
Requires: libdistcache.so.1
Error: Package: lxphp-5.2.17-8.mr.el5.i386 (kloxo-mr-release-version-arch)
Requires: libc-client.so.1
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.i686 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:
note: using the same vps above
-
I wasn't test on OpenVZ but KVM. So, no comment about OpenVZ for Centos 6.
-
Fresh install kloxo-mr final in OpenVZ Centos 6 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh
error
Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libnal.so.1()(64bit)
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:
-
Upgrade kloxo-mr in OpenVZ & XEN (centos 5 32bit, centos 5 64 bit, centos 6 32 bit, centos 6 64 bit) with
- B
- chmod -R 777 /script/
- /script/cleanup
success
-
Fresh install kloxo-mr final in OpenVZ Centos 6 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh
error
Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libnal.so.1()(64bit)
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:
try again bro, today i have same problem "yum gave error" for fresh install on xen vps, and try again "Y" and than successfully..
-
Same problem here:
Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libpq.so.4()(64bit)
Error: Package: mysql-server-5.1.67-1.el6_3.x86_64 (updates)
Requires: mysql = 5.1.67-1.el6_3
Installed: mysql-5.5.29-1.el6.x86_64 (@kloxo-mr-centalt)
mysql = 5.5.29-1.el6
Available: mysql-5.1.66-2.el6_3.x86_64 (base)
mysql = 5.1.66-2.el6_3
Available: mysql-5.1.67-1.el6_3.x86_64 (updates)
mysql = 5.1.67-1.el6_3
Available: mysql50-5.0.96-2.ius.el5.x86_64 (kloxo-mr-ius)
mysql = 5.0.96-2.ius.el5
Available: mysql51-5.1.68-1.ius.el5.x86_64 (kloxo-mr-ius)
mysql = 5.1.68-1.ius.el5
Available: mysql55-5.5.30-1.ius.el5.x86_64 (kloxo-mr-ius)
mysql = 5.5.30-1.ius.el5
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
Requires: libnal.so.1()(64bit)
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
-
What's kloxomr final version?. Early version Final 6.5.0.f-2013031801 have a problem about it. Try 'yum update kloxomr' first.
-
Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:
Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]
-
Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:
Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]
Have you run 'sh /script/cleanup' after update to 6.5.0.f?. Better reboot also.
-
hello.
i try fresh install to my server and run this command
A.2. Install/reinstall/upgrade -- data not destroyed with this fork -
for existing kloxo (6.1.x), run 'sh /script/update' first.
# delete if exist, create kloxo temp dir
rm -rf /tmp/kloxo; mkdir /tmp/kloxo ; cd /tmp/kloxo;
rm -f ./kloxo-mr-dev.sh
# get kloxo-mr-dev installer from github
wget https://github.com/mustafaramadhan/kloxo/raw/dev/kloxo/install/kloxo-mr-dev.sh --no-check-certificate
# install kloxo
sh ./kloxo-mr-dev.sh
# better reboot
reboot
but thats not work properly, and always error install.sh / installer.php
but when i try
B. For Final Release:
# move repo dir
cd /etc/yum.repos.d/
# get repo file -- no need for 6.5.0.c and after
wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate
# move to /
cd /
# install (and then run 'setup.sh' instead 'installer.sh')
yum install kloxomr
# better reboot
reboot
thats work like charm, i dont know where is problem :D
-
At this moment A.2 step as 6.5.1.a (alpha step; unstable; for next version of Kloxo-MR) and B step for 6.5.0.f (stable; rpm format).
-
So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).
-
So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).
IMHO I agree with you sir :)
For this version just fix bug if any :)
But sir, when install kloxo I found varnish instalation,,
For what that's ? And how to enable it?
-
Varnish and hiawata and httpd 2.4 will be ready on 6.5.1. So until now, need a trick to make varnish running well on Kloxo-MR 6.5.0.
On 6.5.1, enable and disable varnish already in panel!.
-
Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.
What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.
Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?
Thank you for keeping this product alive man.
Shawn
-
Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.
What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.
Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?
Thank you for keeping this product alive man.
Shawn
Impossible use low ram if using centos 6 because latest version of mysql (5.5.x) need enable innodb.
-
I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.
-
I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.
So, inform here your 'sh /script/sysinfo'
-
sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031806
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php53u-5.3.23-1.ius.el5
3. Httpd: --uninstalled--
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el5
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy): mod_php_ruid2
E. Memory:
total used free shared buffers cached
Mem: 256 181 74 0 0 100
-/+ buffers/cache: 81 174
Swap: 0 0 0
I have Bind turned off I do not handle DNS on my boxes.
-
sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031806
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php53u-5.3.23-1.ius.el5
3. Httpd: --uninstalled--
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el5
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy): mod_php_ruid2
E. Memory:
total used free shared buffers cached
Mem: 256 181 74 0 0 100
-/+ buffers/cache: 81 174
Swap: 0 0 0
I have Bind turned off I do not handle DNS on my boxes.
So, you don't use php-fpm. For to make sure, run 'yum remove php53u-fpm'.
-
yum remove php53u-fpm
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Remove Process
No Match for argument: php53u-fpm
Loading mirror speeds from cached hostfile
* base: mirror.ubiquityservers.com
* extras: mirror.sanctuaryhost.com
* kloxo-mr-epel: mirror.steadfast.net
* kloxo-mr-ius: dl.iuscommunity.org
* kloxo-mr-ius-c5: dl.iuscommunity.org
* updates: mirror.cogentco.com
base | 1.1 kB 00:00
extras | 2.1 kB 00:00
kloxo-mr-centalt | 951 B 00:00
kloxo-mr-centosec | 2.5 kB 00:00
kloxo-mr-epel | 3.6 kB 00:00
kloxo-mr-ius | 2.2 kB 00:00
kloxo-mr-ius-c5 | 2.2 kB 00:00
kloxo-mr-nginx | 1.2 kB 00:00
kloxo-mr-release-neutral-arch | 1.9 kB 00:00
kloxo-mr-release-neutral-noarch | 1.9 kB 00:00
kloxo-mr-release-version-arch | 1.9 kB 00:00
kloxo-mr-release-version-noarch | 1.9 kB 00:00
kloxo-mr-varnish-3.0 | 951 B 00:00
updates | 1.9 kB 00:00
Excluding Packages from Kloxo-MR - centalt - i386
Finished
Excluding Packages from Kloxo-MR - IUS Community Packages for EL 5 - i386
Finished
Reducing Kloxo-MR - IUS Community Packages for EL 5 (special) - i386 to included packages only
Finished
0 packages excluded due to repository protections
Package(s) php53u-fpm available, but not installed.
No Packages marked for removal
It is not installed on this box, but as you can see with this setup it is using a lot of ram. This is a clean install and no sites are even configured on it. Not even a domain is configured yet.
-
sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031806
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql-5.0.95-5.el5_9
2. PHP: php53u-5.3.23-1.ius.el5
3. Httpd: --uninstalled--
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el5
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-2.P1.el5
D. Php-type (for Httpd/proxy): mod_php_ruid2
E. Memory:
total used free shared buffers cached
Mem: 256 181 74 0 0 100
-/+ buffers/cache: 81 174
Swap: 0 0 0
I have Bind turned off I do not handle DNS on my boxes.
actually it use only 81MB ram.. The rest is cached.. not used
-
I understand it is cached but Solus does not care. Does not matter. I will give up and find another solution. It will be fine. :)
-
I understand it is cached but Solus does not care. Does not matter. I will give up and find another solution. It will be fine. :)
Add crontab with this:
sync; echo 3 > /proc/sys/vm/drop_caches
on every hours or as you decide and this will clear the cache.
-
[root@server2 /]# yum install kloxomr
Loaded plugins: fastestmirror, priorities, protectbase, replace
Loading mirror speeds from cached hostfile
* addons: mirror.steadfast.net
* base: mirror.steadfast.net
* extras: mirror.nexcess.net
* kloxo-mr-epel: mirrors.servercentral.net
* kloxo-mr-ius: dl.iuscommunity.org
* kloxo-mr-ius-c5: dl.iuscommunity.org
* updates: mirror.nexcess.net
Excluding Packages from Kloxo-MR - centalt - i386
Finished
Excluding Packages from Kloxo-MR - IUS Community Packages for EL 5 - i386
Finished
Reducing Kloxo-MR - IUS Community Packages for EL 5 (special) - i386 to included packages only
Finished
0 packages excluded due to repository protections
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package kloxomr.noarch 0:6.5.0.f-2013031806.mr set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
kloxomr noarch 6.5.0.f-2013031806.mr kloxo-mr-release-neutral-noarch 6.1 M
Transaction Summary
================================================================================
Install 1 Package(s)
Upgrade 0 Package(s)
Total download size: 6.1 M
Is this ok [y/N]: y
Downloading Packages:
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031806.mr.noarch.rpm: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error Downloading Packages:
kloxomr-6.5.0.f-2013031806.mr.noarch: failure: kloxomr-6.5.0.f-2013031806.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.
[root@server2 /]#
even tried to reach the file from my home pc and get a 404 error when trying to install final
-
Try again because sometimes have a trouble on github connections.
-
Try again because sometimes have a trouble on github connections.
update kloxomr-6.5.0.f based-on 6.5.1.a-2013032701
@Mustafa you update final or ?
-
Try again because sometimes have a trouble on github connections.
update kloxomr-6.5.0.f based-on 6.5.1.a-2013032701
@Mustafa you update final or ?
Yes
-
Now fresh install kloxo-mr final in centos 6 success
And install MariaDB successful too :D
A. Kloxo-MR: 6.5.0.f-2013031808
B. OS: CentOS release 6.4 (Final) i686
C. Apps:
1. MySQL: MariaDB-server-10.0.1-1.i686
2. PHP: php53u-5.3.23-1.ius.el6.i686
3. Httpd: httpd-2.2.23-1.el6.i686
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el6.i686
6. Qmail: --uninstalled--
7. Dns: bind-9.9.2-2.P1.el6.i686
D. Php-type (for Httpd/proxy): php-fpm_event
(http://img521.imageshack.us/img521/6499/e0373677683245e2acf1122.png)
Thanks Om MR
-
Now fresh install kloxo-mr final (OpenVZ) in centos 6 success
And install MariaDB successful too :D
A. Kloxo-MR: 6.5.0.f-2013031808
B. OS: CentOS release 6.4 (Final) i686
C. Apps:
1. MySQL: MariaDB-server-10.0.1-1.i686
2. PHP: php53u-5.3.23-1.ius.el6.i686
3. Httpd: httpd-2.2.23-1.el6.i686
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el6.i686
6. Qmail: --uninstalled--
7. Dns: bind-9.9.2-2.P1.el6.i686
D. Php-type (for Httpd/proxy): php-fpm_event
(http://img521.imageshack.us/img521/6499/e0373677683245e2acf1122.png)
Thanks Om MR
-
i updated my 3 servers to kloxo-mr final and under the services list for both slaves they have no services listed at all
but the master does
-
Does quota works for you on final ?
-
yum update kloxomr not work
Downloading Packages:
https://github.com/mustafaramadhan/klox ... noarch.rpm (https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031809.mr.noarch.rpm): [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error Downloading Packages:
kloxomr-6.5.0.f-2013031809.mr.noarch: failure: kloxomr-6.5.0.f-2013031809.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.
-
yum update kloxomr not work
Downloading Packages:
https://github.com/mustafaramadhan/klox ... noarch.rpm (https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/kloxomr-6.5.0.f-2013031809.mr.noarch.rpm): [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error Downloading Packages:
kloxomr-6.5.0.f-2013031809.mr.noarch: failure: kloxomr-6.5.0.f-2013031809.mr.noarch.rpm from kloxo-mr-release-neutral-noarch: [Errno 256] No more mirrors to try.
Yes, have a trouble when update rpm. Now, re-upload in progress.
-
what would cause the services list to be blank on both my slave servers? on my master its working fine under 6.5.0f
-
Did you run /script/cleanup ?
-
Yes I ran that on all 3 servers
-
Yes I ran that on all 3 servers
Please post /script/sysinfo
-
server1 (mysql)
[root@server1 ~]# sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031808
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql55-5.5.30-1.ius.el5
2. PHP: php-5.2.17-29.el5
3. Httpd: --uninstalled--
4. Lighttpd: lighttpd-1.4.32-1.el5
5. Nginx: --uninstalled--
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-3.P2.el5
D. Php-type (for Httpd/proxy):
E. Memory:
total used free shared buffers cached
Mem: 2048 955 1092 0 0 0
-/+ buffers/cache: 955 1092
Swap: 0 0 0
server2
[root@server2 ~]# sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031807
B. OS: CentOS release 5.9 (Final) i686
C. Apps:
1. MySQL: mysql55-5.5.30-1.ius.el5
2. PHP: php54-5.4.13-1.ius.el5
3. Httpd: httpd-2.2.23-3.el5
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el5
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
7. Dns: bind-9.9.2-3.P2.el5
D. Php-type (for Httpd/proxy): php-fpm_worker
E. Memory:
total used free shared buffers cached
Mem: 2048 372 1675 0 0 0
-/+ buffers/cache: 372 1675
Swap: 0 0 0
server3
[root@server3 ~]# sh /script/sysinfo
A. Kloxo-MR: 6.5.0.f-2013031808
B. OS: CentOS release 6.3 (Final) x86_64
C. Apps:
1. MySQL: mysql-5.5.29-1.el6.x86_64
2. PHP: php54-5.4.13-1.ius.el6.x86_64
3. Httpd: httpd-2.2.23-1.el6.x86_64
4. Lighttpd: --uninstalled--
5. Nginx: nginx-1.3.15-1.el6.x86_64
6. Qmail: qmail-toaster-1.03-1.3.22.mr.el6.x86_64
7. Dns: bind-9.9.2-2.P1.el6.x86_64
D. Php-type (for Httpd/proxy): php-fpm_worker
E. Memory:
total used free shared buffers cached
Mem: 2048 230 1817 0 0 137
-/+ buffers/cache: 92 1955
Swap: 0 0 0
-
I do have same problem, my master can't read slave services. Another problem, I can't choose php type from web server config.
All server updated to Kloxo-MR: 6.5.0.f-2013031810 by yum update command.
-
always gave me error
https://github.com/mustafaramadhan/kloxo/raw/rpms/release/neutral/noarch/repodata/primary.sqlite.bz2: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.
fresh install or update, can anyone help me to find solutions ?
thanks
-
Nothing problem for installed 15 minutes ago.
-
Nothing problem for installed 15 minutes ago.
for fresh install or upgrade ?
-
If I talk 'install' that mean 'fresh install' and 'update' that mean update from previous Kloxo-MR version.
-
Mail broken after update, viewtopic.php?f=5&t=18826 (http://forum.mratwork.com/viewtopic.php?f=5&t=18826) ,
smtp and pop3 auth always fail...