Kloxo-Mr 6.5.0 f

[dinar]

Fresh install kloxo-mr final in OpenVZ Centos 6 64 bit with:
- A.1
- B
- sh /usr/local/lxlabs/kloxo/install/setup.sh

error

Code: [Select]

Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libnal.so.1()(64bit)
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...
Try again? [y/N]:


try again bro, today i have same problem "yum gave error" for fresh install on xen vps, and try again "Y" and than successfully..

[techpad]

Same problem here:

Error: Package: pure-ftpd-1.0.36-5.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libc-client.so.1()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libdistcache.so.1()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libltdl.so.3()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libnetsnmp.so.10()(64bit)
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libpq.so.4()(64bit)
Error: Package: mysql-server-5.1.67-1.el6_3.x86_64 (updates)
           Requires: mysql = 5.1.67-1.el6_3
           Installed: mysql-5.5.29-1.el6.x86_64 (@kloxo-mr-centalt)
               mysql = 5.5.29-1.el6
           Available: mysql-5.1.66-2.el6_3.x86_64 (base)
               mysql = 5.1.66-2.el6_3
           Available: mysql-5.1.67-1.el6_3.x86_64 (updates)
               mysql = 5.1.67-1.el6_3
           Available: mysql50-5.0.96-2.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.0.96-2.ius.el5
           Available: mysql51-5.1.68-1.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.1.68-1.ius.el5
           Available: mysql55-5.5.30-1.ius.el5.x86_64 (kloxo-mr-ius)
               mysql = 5.5.30-1.ius.el5
Error: Package: lxphp-5.2.17-8.mr.el5.x86_64 (kloxo-mr-release-version-arch)
           Requires: libcurl.so.3()(64bit)
Error: Package: 1:mod_ssl-2.2.23-3.el5.x86_64 (kloxo-mr-centalt)
           Requires: libnal.so.1()(64bit)
 You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
cronie-1.4.4-7.el6.x86_64 has missing requires of /usr/sbin/sendmail
YUM Gave Error... Trying Again...

[MRatWork]

What's kloxomr final version?. Early version Final 6.5.0.f-2013031801 have a problem about it. Try 'yum update kloxomr' first.

[techpad]

Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:

Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]

[MRatWork]

Managed to install on Centos 5.9 x64 but there is another problem when i try to add domain:

Alert: could_not_add_mail [Error - no authentication database connection. Initial open.]

Have you run 'sh /script/cleanup' after update to 6.5.0.f?. Better reboot also.

[prandah]

hello.
i try fresh install to my server and run this command

Code: [Select]

A.2. Install/reinstall/upgrade -- data not destroyed with this fork -
     for existing kloxo (6.1.x), run 'sh /script/update' first.

    # delete if exist, create kloxo temp dir
    rm -rf /tmp/kloxo; mkdir /tmp/kloxo ; cd /tmp/kloxo;

    rm -f ./kloxo-mr-dev.sh

    # get kloxo-mr-dev installer from github
    wget https://github.com/mustafaramadhan/kloxo/raw/dev/kloxo/install/kloxo-mr-dev.sh --no-check-certificate

    # install kloxo
    sh ./kloxo-mr-dev.sh
   
    # better reboot
    reboot

but thats not work properly, and always error install.sh / installer.php

but when i try

Code: [Select]

B. For Final Release:

    # move repo dir
    cd /etc/yum.repos.d/

    # get repo file -- no need for 6.5.0.c and after
    wget https://github.com/mustafaramadhan/kloxo/raw/release/kloxo-mr.repo --no-check-certificate

    # move to /
    cd /

    # install (and then run 'setup.sh' instead 'installer.sh')
    yum install kloxomr
   
    # better reboot
    reboot



thats work like charm, i dont know where is problem

[MRatWork]

At this moment A.2 step as 6.5.1.a (alpha step; unstable; for next version of Kloxo-MR) and B step for 6.5.0.f (stable; rpm format).

[MRatWork]

So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).

[prandah]

So, don't ask why until 6.5.1.b (beta) or 6.5.1.c (candidate).

IMHO I agree with you sir
For this version just fix bug if any
But sir, when install kloxo I found varnish instalation,,
For what that's ? And how to enable it?

[MRatWork]

Varnish and hiawata and httpd 2.4 will be ready on 6.5.1. So until now, need a trick to make varnish running well on Kloxo-MR 6.5.0.

On 6.5.1, enable and disable varnish already in panel!.

[AuroraZero]

Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.

What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.

Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?

Thank you for keeping this product alive man.

Shawn

[MRatWork]

Hey man long time no talk. Things have been working well for me thus far, but I have just a couple of quick questions for you.

What kind of ram requirements are we looking at for this release? The last ones worked well on low ram machines but this one does not want to install so well on a machine with 256mb.

Also I am not installing the Dev version anymore just the final version but should I be going this route? I mean should I install just the final version, or go with the dev steps then upgrade on such a low ram machine?

Thank you for keeping this product alive man.

Shawn

Impossible use low ram if using centos 6 because latest version of mysql (5.5.x) need enable innodb.

[AuroraZero]

I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.

[MRatWork]

I am not using Centos 6 I am using Centos 5.9. I used to be able to get the ram usage down to about 33mb using nginx, php53u, with fpm. Now it is over 100mb no matter what I do and that is before I even configure a site. I do not know what has changed but something certainly has.

So, inform here your 'sh /script/sysinfo'

[AuroraZero]

Code: [Select]

sh /script/sysinfo

A. Kloxo-MR: 6.5.0.f-2013031806

B. OS: CentOS release 5.9 (Final) i686

C. Apps:
   1. MySQL: mysql-5.0.95-5.el5_9
   2. PHP: php53u-5.3.23-1.ius.el5
   3. Httpd: --uninstalled--
   4. Lighttpd: --uninstalled--
   5. Nginx: nginx-1.3.15-1.el5
   6. Qmail: qmail-toaster-1.03-1.3.22.mr.el5
   7. Dns: bind-9.9.2-2.P1.el5

D. Php-type (for Httpd/proxy): mod_php_ruid2

E. Memory:
                total       used       free     shared    buffers     cached
   Mem:           256        181         74          0          0        100
   -/+ buffers/cache:         81        174
   Swap:            0          0          0

I have Bind turned off I do not handle DNS on my boxes.