PHP Configure

[MRatWork]

1. Untuk mengembalikan ke php 5.4, lakukan 'sh /script/php-branch --select=php54'. Kemudian lakukan 'chkconfig php-fpm on; sh /script/restart-web -y'
2. Sebaiknya anda memakai php type phpm dengan cara:
- jalankan 'sh /script/phpm-all-install' untuk menginstall semua php type phpm --> langkah yang sama bisa melalui 'multiple php install' di 'webserver configure'
- jalankan 'sh /script/set-php-fpm php54m' --> langkah yang sama dilakukan melalui 'php used' di 'webserver configure'
- Bebeda dengan php branch (diinstall melalui 'yum install; diganti melalui 'yum replace') maka phpm pergantian antar php tidak memerlukan lagi proses install atau replace.

[jueliyahwijaya]

ok langsung di coba 

hasinya :

[root@ns10 ~]#  sh /script/restart-web -y

nginx: [emerg] unknown directive "fastcgi_request_buffering" in /opt/configs/nginx/conf/globals/switch_standard.conf:25
nginx: configuration file /etc/nginx/nginx.conf test failed
-------------------------------------------------------------------

Stopping httpd:                                            [FAILED]
Starting httpd: httpd.event: Syntax error on line 63 of /etc/httpd/conf/httpd.conf: Syntax error on line 3 of /etc/httpd/conf.d/rpaf.conf: Cannot load /etc/httpd/modules/mod_rpaf-2.0.so into server: /etc/httpd/modules/mod_rpaf-2.0.so: cannot open shared object file: No such file or directory
                                                           [FAILED]
-------------------------------------------------------------------

Stopping php54m-fpm:                                       [FAILED]
Starting php54m-fpm: [30-May-2015 00:05:46] ERROR: An another FPM instance seems to already listen on /opt/configs/php-fpm/sock/apache.sock
[30-May-2015 00:05:46] ERROR: FPM initialization failed
                                                           [FAILED]
-------------------------------------------------------------------

- For help, type '/script/restart-web [--help|-h]'

[jueliyahwijaya]

[root@ns10 ~]# sh /script/phpm-all-install

- For help, type '/script/phpm-installer --help'
=== BEGIN 'php52m' install ===
- 'php52-5.2.17-102.mr.el6' ready to installed/updated

*** Process Time: 00:00:00:13.13546 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Remove Process
No Match for argument: php52s*
Loading mirror speeds from cached hostfile
 * atomic: www8.atomicorp.com
 * base: mirrors.centarra.com
 * extras: mirrors.centarra.com
 * mratwork-epel: fedora-epel.mirror.lstn.net
 * mratwork-ius-stable: dfw.mirror.rackspace.com
 * updates: mirrors.centarra.com
587 packages excluded due to repository priority protections
0 packages excluded due to repository protections
Package(s) php52s* available, but not installed.
No Packages marked for removal
=== BEGIN 'php52s' install ===
- 'php52-5.2.17-102.mr.el6' ready to installed/updated

*** Process Time: 00:00:00:17.17812 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php53m' install ===
- 'php53u-5.3.29-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:05.5424 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Remove Process
No Match for argument: php53s*
Loading mirror speeds from cached hostfile
 * atomic: www8.atomicorp.com
 * base: mirrors.centarra.com
 * extras: mirrors.centarra.com
 * mratwork-epel: fedora-epel.mirror.lstn.net
 * mratwork-ius-stable: dfw.mirror.rackspace.com
 * updates: mirrors.centarra.com
587 packages excluded due to repository priority protections
0 packages excluded due to repository protections
Package(s) php53s* available, but not installed.
No Packages marked for removal
error: package php53s-fpm is not installed
=== BEGIN 'php53s' install ===
- 'php53u-5.3.29-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:10.10273 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php54m' install ===
- 'php54-5.4.41-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:13.13536 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
Loaded plugins: fastestmirror, priorities, protectbase, replace
Setting up Remove Process
No Match for argument: php54s*
Loading mirror speeds from cached hostfile
 * atomic: www8.atomicorp.com
 * base: mirrors.centarra.com
 * extras: mirrors.centarra.com
 * mratwork-epel: fedora-epel.mirror.lstn.net
 * mratwork-ius-stable: dfw.mirror.rackspace.com
 * updates: mirrors.centarra.com
587 packages excluded due to repository priority protections
0 packages excluded due to repository protections
No Packages marked for removal
error: package php54s-fpm is not installed
=== BEGIN 'php54s' install ===
- 'php54-5.4.41-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:18.18720 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php55m' install ===
- 'php55u-5.5.25-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:05.5421 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php55s' install ===
- 'php55u-5.5.25-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:05.5367 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php56m' install ===
- 'php56u-5.6.9-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:05.5355 (dd:hh:mm:ss:xxxxxx) ***


- For help, type '/script/phpm-installer --help'
=== BEGIN 'php56s' install ===
- 'php56u-5.6.9-1.ius.el6' ready to installed/updated

*** Process Time: 00:00:00:05.5426 (dd:hh:mm:ss:xxxxxx) ***

[jueliyahwijaya]

coba cek v php
[root@ns10 ~]# php -v
-bash: php: command not found

jadi bingung

[MRatWork]

Coba dari 'switch programs' pilih 'none' untuk 'web' dan kemudian ubah kembali ke semula.

[MRatWork]

Periksa juga di 'webserver configure' terkait 'php-type' dan 'php branch'.

[MRatWork]

BTW, apa anda menambahkan repo lain?. Perlihatkan 'dir -l /etc/yum.repos.d'.

[jueliyahwijaya]

hasil clean up

- New version of packages installed
Removing /home/httpd/*/httpdocs
- Removing...
Add 'hostname' information to '/etc/hosts'
- Add ip, short and full name of 'hostname'
Initialize some skeletons
- Php files for default web page
- Skeleton for default web page
- robots.txt for default web page
- Php files for disable web page
- Skeleton for disable web page
- robots.txt for disable web page
- Php files for webmail web page
- Skeleton for webmail web page
- robots.txt for webmail web page
- Php files for cp web page
- Skeleton for cp web page
- robots.txt for cp web page
- Skeleton for error web page
- robots.txt for error web page
- chown apache:apache FOR /home/kloxo/httpd/ AND INSIDE
- chmod 644 FOR *.php* INSIDE /home/kloxo/httpd/
- chmod 755 FOR *.pl/cgi/py/rb INSIDE /home/kloxo/httpd/
- chmod 755 FOR /home/kloxo/httpd/ AND INSIDE
- chmod 771 FOR /home/kloxo/httpd/
- Php files for login web page
- Skeleton for login web page
- Files for error web pages
- Skeleton for error web pages
- Copy error web pages to '/home/kloxo/httpd/error'
- No exists user-skeleton
- No exists user-logo
Initialize phpMyAdmin configfile
- phpMyAdmin: Set db password in configfile
Initialize OS admin account description
- Initialize process
Copy all contents from /usr/local/lxlabs/kloxo/file/bind
- Copy to /opt/configs/bind
- Copy etc/named.conf to /etc/named.conf
Copy all contents from /usr/local/lxlabs/kloxo/file/djbdns
- Copy to /opt/configs/djbdns
Copy all contents from /usr/local/lxlabs/kloxo/file/mydns
- Copy to /opt/configs/mydns
- Copy etc/conf/mydns.conf to /etc/mydns/mydns.conf
Preparing MyDns database
- Fixing MySQL commands in import files
- Generating password
- Add Password to configuration file
Copy all contents from /usr/local/lxlabs/kloxo/file/nsd
- Copy to /opt/configs/nsd
- Copy etc/conf/nsd3.conf to /etc/nsd/nsd.conf
Copy all contents from /usr/local/lxlabs/kloxo/file/pdns
- Copy to /opt/configs/pdns
- Copy etc/conf/pdns.conf to /etc/pdns/pdns.conf
Preparing PowerDNS database
- Install MySQL and Geo Backend
- Fixing MySQL commands in import files
- Generating password
- Add Password to configuration file
Copy all contents from /usr/local/lxlabs/kloxo/file/yadifa
- Copy to /opt/configs/yadifa
- Copy etc/yadifad.conf to /etc/yadifad.conf
Initialize apache config
- /etc/httpd/conf.d dir already exists
- /opt/configs/apache/tpl dir already exists
- /opt/configs/apache/conf dir already exists
- /opt/configs/apache/etc dir already exists
- /opt/configs/apache/etc/conf dir already exists
- /opt/configs/apache/etc/conf.d dir already exists
Copy all contents from /usr/local/lxlabs/kloxo/file/apache
- Copy to /opt/configs/apache
- Copy etc/conf/httpd.conf to /etc/httpd/conf/httpd.conf
- chown root:root FOR /opt/configs/apache/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/apache/
Initialize lighttpd config
- /etc/lighttpd/conf.d dir already exists
- /opt/configs/lighttpd/tpl dir already exists
- /opt/configs/lighttpd/conf dir already exists
- /opt/configs/lighttpd/etc dir already exists
- /opt/configs/lighttpd/etc/conf dir already exists
- /opt/configs/lighttpd/etc/conf.d dir already exists
Copy all contents from /usr/local/lxlabs/kloxo/file/lighttpd
- Copy to /opt/configs/lighttpd
- Copy etc/conf/lighttpd.conf to /etc/lighttpd/lighttpd.conf
- chown root:root FOR /opt/configs/lighttpd/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/lighttpd/
Initialize nginx config
- /etc/nginx/conf.d dir already exists
- /opt/configs/nginx/tpl dir already exists
- /opt/configs/nginx/conf dir already exists
- /opt/configs/nginx/etc dir already exists
- /opt/configs/nginx/etc/conf dir already exists
- /opt/configs/nginx/etc/conf.d dir already exists
Copy all contents from /usr/local/lxlabs/kloxo/file/nginx
- Copy to /opt/configs/nginx
- Copy etc/conf/nginx.conf to /etc/nginx/nginx.conf
- chown root:root FOR /opt/configs/nginx/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/nginx/
Initialize hiawatha config
- /etc/hiawatha/conf.d dir already exists
- /opt/configs/hiawatha/tpl dir already exists
- /opt/configs/hiawatha/conf dir already exists
- /opt/configs/hiawatha/etc dir already exists
- /opt/configs/hiawatha/etc/conf dir already exists
- /opt/configs/hiawatha/etc/conf.d dir already exists
Copy all contents from /usr/local/lxlabs/kloxo/file/hiawatha
- Copy to /opt/configs/hiawatha
- Copy etc/conf/hiawatha_standard.conf to /etc/hiawatha/hiawatha.conf
- chown root:root FOR /opt/configs/hiawatha/ AND INSIDE
- chmod 755 FOR *.sh INSIDE /opt/configs/hiawatha/
Copy all contents from /usr/local/lxlabs/kloxo/file/varnish
- Copy to /opt/configs/varnish
Copy all contents from /usr/local/lxlabs/kloxo/file/squid
- Copy to /opt/configs/squid
Copy all contents from /usr/local/lxlabs/kloxo/file/trafficserver
- Copy to /opt/configs/trafficserver
[30-May-2015 00:30:00] ERROR: An another FPM instance seems to already listen on /opt/configs/php-fpm/sock/apache.sock
[30-May-2015 00:30:00] ERROR: FPM initialization failed
Copy all contents from /usr/local/lxlabs/kloxo/file/openssl
- Copy to /opt/configs/openssl
Initialize PureFtp service
- Initialize process
- Restart xinetd service for pureftp
Initialize logrotates
Install Webmail chooser
- Install process
Initialize Mail service
- Initialize process
Fix services
- Fix dns services
- Fix webcache services
- Fix web services
-fpm: unknown option
sh: php: command not found
- Fix php services
sed: can't read /etc/php.ini: No such file or directory
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
sh: php: command not found
- Fix mail-all services
- Fix ftp-all services
Fixing Hiawatha service
*** Executing Update (cleanup) - END ***

*** Restart services - BEGIN ***

Shutting down system logger:                               [  OK  ]
Starting system logger:                                    [  OK  ]
-------------------------------------------------------------------

Stopping mysqld:                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
-------------------------------------------------------------------

Stopping named:                                            [  OK  ]
Starting named:                                            [  OK  ]
-------------------------------------------------------------------

nginx: [emerg] unknown directive "fastcgi_request_buffering" in /opt/configs/nginx/conf/globals/switch_standard.conf:25
nginx: configuration file /etc/nginx/nginx.conf test failed
-------------------------------------------------------------------

Stopping httpd:                                            [FAILED]
Starting httpd: httpd.event: Syntax error on line 63 of /etc/httpd/conf/httpd.conf: Syntax error on line 3 of /etc/httpd/conf.d/rpaf.conf: Cannot load /etc/httpd/modules/mod_rpaf-2.0.so into server: /etc/httpd/modules/mod_rpaf-2.0.so: cannot open shared object file: No such file or directory
                                                           [FAILED]
-------------------------------------------------------------------


*** Process for QMAIL service ***
Stopping qmail-toaster: svscan qmail logging.
qmail-send: no process killed
Starting qmail-toaster: svscan.
-------------------------------------------------------------------

- For help, type '/script/restart-mail [--help|-h]'
-------------------------------------------------------------------

Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
-------------------------------------------------------------------

Execute fixlxphpexe for php53s...
Stopping kloxo-phpcgi:                                     [  OK  ]
Starting kloxo-phpcgi:                                     [  OK  ]
Stopping kloxo-hiawatha:                                   [  OK  ]
Starting kloxo-hiawatha:                                   [  OK  ]
-------------------------------------------------------------------

Stopping php54m-fpm:                                       [FAILED]
Starting php54m-fpm: [30-May-2015 00:31:30] ERROR: An another FPM instance seems to already listen on /opt/configs/php-fpm/sock/apache.sock
[30-May-2015 00:31:30] ERROR: FPM initialization failed
                                                           [FAILED]
-------------------------------------------------------------------
*** Restart services - END ***


*** Process Time: 00:00:07:02.422431 (dd:hh:mm:ss:xxxxxx) ***

[root@ns10 ~]#

___________________

iya sepertinya waktu ngakalin ioncube di php 52

-rw-r--r-- 1 root root 1991 Oct 23  2014 CentOS-Base.repo
-rw-r--r-- 1 root root  647 Oct 23  2014 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root  630 Oct 23  2014 CentOS-Media.repo
-rw-r--r-- 1 root root 5394 Oct 23  2014 CentOS-Vault.repo
-rw-r--r-- 1 root root  289 Oct 23  2014 CentOS-fasttrack.repo
-rw-r--r-- 1 root root  948 Apr 15  2014 atomic.repo
-rw-r--r-- 1 root root 7904 Mar 28 10:30 mratwork.repo
-rw-r--r-- 1 root root 6596 Oct 30  2014 mratwork.repo.rpmsave
-rw-r--r-- 1 root root  219 Jul 24  2013 vz.repo

[MRatWork]

Jika menemukan 'ERROR: An another FPM instance', coba lakukan 'pkill -9 php-fpm; sh /script/restart-web -y'.

[jueliyahwijaya]

[root@ns10 ~]# sh /script/restart-all -y

Shutting down system logger:                               [  OK  ]
Starting system logger:                                    [  OK  ]
-------------------------------------------------------------------

Stopping mysqld:                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
-------------------------------------------------------------------

Stopping nsd:                                              [  OK  ]
Starting nsd:                                              [  OK  ]
-------------------------------------------------------------------

Stopping httpd:                                            [FAILED]
Starting httpd: httpd.event: Syntax error on line 63 of /etc/httpd/conf/httpd.conf: Syntax error on line 3 of /etc/httpd/conf.d/rpaf.conf: Cannot load /etc/httpd/modules/mod_rpaf-2.0.so into server: /etc/httpd/modules/mod_rpaf-2.0.so: cannot open shared object file: No such file or directory
                                                           [FAILED]
-------------------------------------------------------------------


*** Process for QMAIL service ***
Stopping qmail-toaster: svscan qmail logging.
qmail-send: no process killed
Starting qmail-toaster: svscan.
-------------------------------------------------------------------

- For help, type '/script/restart-mail [--help|-h]'
-------------------------------------------------------------------

Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
-------------------------------------------------------------------

Execute fixlxphpexe for php53s...
Stopping kloxo-phpcgi:                                     [  OK  ]
Starting kloxo-phpcgi:                                     [  OK  ]
Stopping kloxo-hiawatha:                                   [  OK  ]
Starting kloxo-hiawatha:                                   [  OK  ]
-------------------------------------------------------------------

Stopping php56m-fpm:                                       [  OK  ]
Starting php56m-fpm:                                       [  OK  ]
-------------------------------------------------------------------
[root@ns10 ~]#

[jueliyahwijaya]

ok akhirnya mau juga tapi ahirnya pake php 5.6, kalau mau di tambain ioncube kira2 nanti eror lagi tidak ya

[MRatWork]

Php 5.6 belum ada ioncube. Jika php53-55 sudah ada. Coba lihat file ioncube-loader.nonini (bisa jadi didepan nama ada angka misalnya 10- sehingga terlihat sebagai 10-ioncube-loader.nonini) di /opt/php55m/etc/php.d (untuk kasus php55m). Aktifkan dengan cara meng-copy file tersebut ke ioncube-loader_used.ini (jika ada angka akan menjadi 10-ioncube-loader_used.ini misalnya). Dan kemudian restart web dengan 'sh /script/restart-web -y'.

[jueliyahwijaya]

jadi tidak bisa menggunakan yum instal seperti di kloxo mr 6 php53 ya, untuk yang php 55 bila ingin menggunakan yum instal dari repo lain kira2 bisa tidak ya

[jueliyahwijaya]

tadi waktu cek terlihat

php55u-ioncube-loader.x86_64           5.0.4-1.ius.el6           mratwork-ius-stable

mau menggunakan perintah yum instal takut kejadian seperti di php 5.2,

[MRatWork]

Jika anda pakai 'phpXYm' (misalnya php54m) pada 'php used' di 'webserver configure', anda tinggal copy ??-ioncube-loader.nonini ke ??-ioncube-loader_used.ini di /opt/<phpXYm>/etc/php.d.

Dianjurkan pakai phpXYm di 'php used' daripada 'php branch'. Karena ada kemungkinan 'php branch' ditiadakan pada KLoxo-MR 7.0 dengan alasan phpXYm lebih 'tangguh' daripada 'php branch'.