ERROR fresh instalasi

[hotman]

Saya beberapa kali install tidak berhasil ketika "sh /script/upcp"
error berhenti seperti dibawah ini..

-------------------------------------------------------------------------------------
--> Finished Dependency Resolution
Error:  Multilib version problems found. This often means that the root
       cause is something else and multilib version checking is just
       pointing out that there is a problem. Eg.:

         1. You have an upgrade for libxml2 which is missing some
            dependency that another package requires. Yum is trying to
            solve this by installing an older version of libxml2 of the
            different architecture. If you exclude the bad architecture
            yum will tell you what the root cause is (which package
            requires what). You can try redoing the upgrade with
            --exclude libxml2.otherarch ... this should give you an error
            message showing the root cause of the problem.

         2. You have multiple architectures of libxml2 installed, but
            yum can only see an upgrade for one of those arcitectures.
            If you don't want/need both architectures anymore then you
            can remove the one with the missing update and everything
            will work.

         3. You have duplicate versions of libxml2 installed already.
            You can use "yum check" to get yum show these errors.

       ...you can also use --setopt=protected_multilib=false to remove
       this checking, however this is almost never the correct thing to
       do as something else is very likely to go wrong (often causing
       much more problems).

       Protected multilib versions: libxml2-2.9.1-1.mr.el6.x86_64 != libxml2-2.7.6-21.el6_8.1.i686
/usr/local/lxlabs/kloxo/install/setup.sh: line 165: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found
/usr/local/lxlabs/kloxo/install/setup.sh: line 172: lxphp.exe: command not found

Run 'sh /script/restart-all' to make sure all services running well

--------------------------------------------------------------------------------------------

saya menggunakan centOS 6. dan kloxo-mr versi 6.5.0
mohon bantuannya. terima kasih

[MRatWork]

Jalankan 'yum remove *.i386 *.i686 -y' sebelum upcp.

[hotman]

YES berhasil Pak. Mustafa. Terima kasih banyak.
Kalau boleh tahu kenapa hal ini bisa terjadi ya?

[MRatWork]

Karena pada beberapa OS template yang 64bit ada component 32bit. Celakanya component-component ini perlu di-update tapi tidak ikutserta bagian yang 32bit.

Pada kondisi sekarang, component 32bit nyaris tidak berguna. Cuma berguna sedikit jika anda ingin develop 32bit pada 64bit OS.

[MRatWork]

Jika yang diinstall Kloxo-MR 7.0, masalah ini sudah 'dibereskan'.

[hotman]

Terima kasih atas pencerahannya Pak

[hotman]

satu lagi pak, fresh install di server berbeda (digital oceam)
centOS 6.8 x64 install kloxomr7

ketika 'sh /script/upcp' muncul warning dibawah ini
-------------------------------------------------------------------
 WARNING:
 - Need change hostname with qualify to FQDN
   (use 'server1.domain.com' instead 'server1')
 - May trouble for web and mail without FQDN hostname
-------------------------------------------------------------------
 - For OpenVZ VPS, change hostname from VPS panel
 - For Others, change 'HOSTNAME' in '/etc/sysconfig/network' file
 - Reboot after change hostname

[MRatWork]

Artinya hostname belum mengikuti FQDN. Jika hostname belum beres, bisa bermasalah dengan send and received mail.

[hotman]

YES sudah berhasil diperbaiki dan sudah aktif. Terimakasih banyak Pak